MY BLUETOOTH WONT TURN ON HELP

bluetooth stopped working. it wont turn on anymore. ive tried turning it on but no response.

Satellite L875D-S7111
According to the spec above, that model does not contain Bluetooth hardware.
-Jerry

Similar Messages

  • HT4528 my iphone4 wont turn on, help

    my iphone4 wont turn on, help please

    try holding the home and power buttons at the same time and see what happens.

  • Z3 Bluetooth wont turn on

    My bluetooth wont turn on and the visabilty doesn't high light also phone sometimes scrolls by itself

    Try performing a system repair as this will often fix issues - This will factory reset your phone
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    If this fails then you need to either return your device to the place of purchase or contact Xperia care and have your device inspected for a fault http://www.sonymobile.com/global-en/support/contact-us/
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Ipod wont turn on help please

    last time i tried to turn it on, the logo came up but was surrounded by blue, not black. now it wont turn on at all and is not read by anything. ive tried the reset several times. still doesnt work. its just off and not responding. can any one help? thanks

    Hi Oscar619,
    You might want to look at the following for more information
    Knowledge Base Document #61003 on iPod shows a folder icon with exclamation point when you turn it on
    Knowledge Base Document #93936 on iPod iconology or what does this picture on my iPod mean?
    Knowledge Base Document #60941 on iPod's battery doesn't charge
    "The Five Rs"
    Jon

  • BB 8120 WONT TURN ON - HELP

    Had it since october 09, was listening to music then all of a sudden it turned off wont turn back on, I recently had it unlocked but its been working fine until now, Please help me

    Start by doing a battery pull.  Simply remove the battery for 15-30 seconds, then reinsert it and wait for the device to reboot.  That may help, but it may not.  If it doesn't, then the next step is to ensure that the battery simply isn't dead.  In that case, plug it into the BlackBerry wall charger for a couple of hours and then see if that helps.  Note that in this case, if  the battery is dead, charging via the USB cable, a car adapter or a non-OEM charger may not work, so it would be best to use the actual wall charger.
    If none of those help, then let us know and we can try to take things a little further.
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • My ipod touch 5th generation wont charge or turn on at all, at first i though the lightning cable was the problem so i bought 2 more lightning chargers and the only thing my ipod does it gets really hot but wont turn on :( help!!

    My ipod touch 5th generation wont charge or turn on at all,
    i upgraded to iOS 6.1.3 and after that my ipod started having trouble charging, at first i though the lightning cable was the problem so i bought 2 more lightning cable chargers and my ipod still would'nt charge, so it died. now the only thing my ipod does is when i try to turn it on it shows the apple logo and then the screen goes off and does it again for a few times and then the screen stays off and my ipod gets really hot but wont turn on for the rest of the day help!!

    The hotness indicate a hardware problem.
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or send it to Apple.
    Apple - Support - iPod - Service FAQ
    If not abused Apple will exchange it for a refurbished one at no coast. otherwise the exchange price is $149.

  • Ipod wont turn off, HELP!!!

    i have a new 60GB ipod video and i got it 3 month's ago and it wont turn off i have tried pushing down the play/pause button but it wont work, HELP PLEASE!!!!

    I had a similar problem with my dad's iPod Nano, here's a way to fix it for ALL iPods:
    1. Enter Settings
    2. Select Main Menu
    3. Switch the last option: Sleep to On
    4. Select Sleep from the iPod main menu to turn it off, then (of course) put the Hold switch on Lock.
    Must have solved your problem

  • ZEN MICRO WONT TURN ON HELP PLEASE

    <FONT face=Verdana color=#cc33ff>I need help with my Zen Micro...Please!! It wont turn on, It wont charge, It wont work when i plug it into my computer. I contacted the support they want me to send it in but i dont have a receipt or proof of purchase. I bought it from the site is there a way to get my receipt online? Can someone help me figure out the problem without me haveing to send it in? PLEASE HELP ME!!!!!

    What site did you buy it from? You should be able to print off a valid receipt, as long as it's not an auction site like eBay.

  • Playbook wouldn't charge, and now wont turn on, HELP?

     So yesterday, I tried to charge my playbook, but it wouldn't work. Its not brand new, but its not old either, I have had it for a month maybe? I used the charger that came with it, and I tried using the USB too. Neither worked. I tried my charger on my friends playbook (same kind, we bought them together), and it worked, so I know its not that. I tried leaving it over night, still nothing. Now it wont turn on either, the little button thingy (pardon my non-technical terms) at the top just turns red, then flashes yellow/green five times. Any suggestions are welcomed, please and thank you! 

    Try a hard reset with it plugged in...press and hold the power and volume +&- until the device restarts...worked for me.

  • My phone wont turn on HELP

    i have the ios7 beta 2 and it worked great for a couple weeks. now my phone wont turn on. the apple sign shows up then it goes to the loading circle and freezes. i dont care if i have to reset it i just want to be able to use my phone again.

    i have the ios7 beta 2 and it worked great for a couple weeks. now my phone wont turn on. the apple sign shows up then it goes to the loading circle and freezes. i dont care if i have to reset it i just want to be able to use my phone again.

  • My 4g touch wont turn on help!!

    My iTouch wont charge. i plug it in and then like nothing happens, usually when i press the sleep button it shows the low battery thing but its not there. I've tryed it in both my laptop and Wall charger.
    I Wanna use it so HelpMePlease

    I had the same problem when I got iPod touch 4th Generation, usually if you dropped it then you would have to call Apple and request to get a new one by default.
    But, if you happen to come across it not turning on then all you have to do is press and hold the home button and the POWER button at the top of the iPod AT THE SAME TIME for about a minute.
    Then it should turn on
    Hope this helps!!

  • Bluetooth wont turn on in phone x6

    cant get my nokia x6 to turn on the bluetooth setting

    @mushroomx6
    Suggest that you backup essential data with Nokia Suite, reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user) and if necessary re-install exisitng device software with Nokia Suite > Options > Software updates. At this point you would have excluded any possible software corruption and a trip to Nokia Care facility look increasingly likely.
    Happy to have helped forum with a Support Ratio = 42.5

  • My macbook wont turn on help!!??

    My MacBook pro shuts down in the middle of me using and went black and when I hit the power button it went to restart but then died again mu mac isn't even a year yet. What can I do?!?!?

    Try my steps:
    What to do if your Mac won’t power on
    First, try plugging in your Mac to allow the battery to charge. If it is not a portable Apple computer, skip this step. Wait a few minutes, and then try powering on the computer.
    Next, try resetting your SMC.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Then, try resetting your PRAM.
    Resetting the NVRAM/PRAM
    Note: This will not delete any data.
    The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Turn on the computer by pressing the Power Button.
    On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
    Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
    Release the keys on the built-in keyboard.
    Then, try repairing the disk permissions using Disk Utility.
    Repairing a disk’s permissions using Disk Utility on the Recovery HD.
    Note: This should not delete any information or files from the disk.
    Repairing a disk's permissions can help solve various file-related issues.
    To begin, make sure your external disk that you are repairing is connected to the computer. If you are repairing an internal disk, skip this step.
    Make sure the computer is powered off before continuing.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Recovery HD partition to boot up in the Recovery HD partition.
    Select Disk Utility.
    Once you are in the Disk Utility app, select the external drive from the sidebar on the left.
    Then, choose the Repair Disk Permissions button on the right.
    If this does not solve your issues, you may have no choice but to reformat the drive using Disk Utility.
    If that does not work, try reinstalling OS X but not erasing.
    Reinstall OS X
    Note: This will not erase any data on the disk. However, it is highly recommended that you create a backup before continuing.
    Reinstalling OS X can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    Then, try erasing and reinstalling OS X.
    Erase and Reinstall OS X
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Recovery HD partition to boot up in the Recovery HD partition.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I helped.
    Austin

  • My blackberry wont turn on HELP ME PLEASE!

    I tired to update my blackberry but then it said the device could not be recognised so i then took out the usb and now it just won't turn on but it just flashes red some one help me PLEASE!!!! 

    malcolmrmc wrote:
    How do i reboot my blackberry storm??
    Exactly as JSanders described for you above.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I got an error message when updating my phone and now its stuck with the apple on the screen it wont turn off HELP!

    my i phone 4 is stuck with the apple logo on the front screen. i tried turning off but its frozen. this happened when i was doing the most current up date and an error message popped up. please help.
    Laci

    1. Try forcing reboot by holding down the home button and power/sleep button at the same time until the screen restarts.
    -- IF THAT FAILS --
    Let the phone battery drain.

Maybe you are looking for

  • Invoice from a Blanket PO

    Hi, I have created a Blanket PO for general office supplies with Account Assignment as K and Item Category as B i.e. limit. Now, i am creating a invoice for this PO - wherein i have 2 issues - 1.  The validity period of the PO is given as 1st July to

  • Flashback in dataguard environment

    Hi, We have dataguard environment with Sun OS & Oracle 10g, 11g. Now we want to enable flashback for the primary database as well as standby database (physical standby). NO RMAN. I did manage to configure the flashback for the primary database but co

  • Order of pages on sheet reversed!

    I'm printing a multi page PDF, 2 pages per paper sheet, side by side across the width of a landscape oriented A4. The problem is, Preview forces the order of pages to be reversed, ie page 1 is on the right and page 2 is on the left! I have modified A

  • ArrayCollections with same data source

    Hi Everyone, Recently I got in a project which use Tree objects to visualize and manipulate objects. The data source of this object must to be the same but with different visualizations. In some views this tree will be filtered and in other places it

  • Can the timeout for smtp/pop server be increased in Mac Mail?

    Hi, do anyone know if this is possible? Thanks.