My Board cannot see my P-ATA 80GB WD HD

At bios set up my bord see my 80GB P-ATA HD as 33GB only
P4 2GHZ cpu , 256MB Ram bus400,

Check to see if there is a jumper on your drive that limits its size to 32 GB. This was required way back when.
If you need to ask more questions, please read the Rules of the Forum sticky for how/what to put in a signature, and read this Moan Guide for common problems and where to find information.

Similar Messages

[925 Series] no audio.. cannot see audio

please help.. have bought a 925x mother board and ac97 and azilla is set up as auto.... installed pre sp1 xp onto system to confirm boot up.. cannot see the audio codec in the hardware manager and cannnot istall driver cos it cant see the hardware?
any ideas.. this is a first build for me and this is the only thing letting me down..
2.8G P4,512 DDR2533,80gig pata primary 80GB sata secondary
geberig 350W P$ supply 20Pin... just to get system running.
asus 5750pci-e graphics..
thermaltake shark PSU

sorted.. reinstalled OS and followed the topic and it installed like a dream...... thanks fo all the info.. was a great help..
simon

Team members see projects, sprints, code, burndown chart, but cannot see backlog items (not even the tasks assigned to them)

I have a VS Online account (http://tec.visualstudio.com), I created it with my [email protected] ID, now I want to use it for the projects at the university I work for. My work ID is [email protected], and my jobmates use others...
The University has the MSDN Subscription and we have assigned permissions for it.
We can see some things in the projects but none of the users (except for the [email protected] ID) can see the baclog items and the boards...

Hi Christian,
Thanks for your post.
Your Free users cannot see the Backlog items and Board pages too? Please share your screenshot(s) here.
For licenses to users in VSO, please refer to:
http://www.visualstudio.com/get-started/assign-licenses-to-users-vs.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot see instrument editor

New to this version of Logic Pro, I am now using version 8. As you know, when I click on EXS24 button under I/O it opens the semi-transparent gray window that says Inst 1 which is my EXS24. In the gray window I see that there are two options under view: controls and editor. When I choose controls I see all of the sliders and settings. However, when I click on editor, the gray window is blank (it does say EXS24 at the bottom) but shouldn't I see the instrument, kind of like I used to see it in Logic Pro 7? Almost like a pedal board view?
Help! I prefer to see the instrument as I used to.
What am I doing incorrectly?
Any assistance will be much appreciated!!

Thanks.
Actually, I'm already running 10.6.7, just had not updated my profile. Might it have anything to do with the fact that I have both Quicktime 7 and X on my computer? It's weird, all aspects of the program work fine, I just cannot see any interfaces for the built-in interfaces, EXS24, EVD6, etc.
But your Quicktime idea has me wondering if two versions might be an interference. For the record, I have temporarily trashed both versions individually to see if that would work, but to no avail.
Really frustrating. Let me know if you can think of anything else. I've already reinstalled, so I don't know that that will make a difference.

My iphone 3gs is turned ON but i cannot see anything on the screen

My iphone 3gs is turned ON but i cannot see anything on the screen

Reset, hold both Home and Power buttons until the iPhone restarts. See if this fixes the problem. If not, it is possible that the LCD display #1 Flex Cable has come loose from the Logic Board. Take the iPhone to Apple and ask the Genius to reseat flex cable #1. Before opening and during any repairs on the iPhone 3GS, make sure the iPhone is OFF.

MAX cannot see PXI-8252

Hi all,
I have NI PXI-1042 with PXI-8187 and PXI-8252. In MAX-Devices and
Interfaces I
cannot see 8252 (port 2 empty). I tried to uninstal and reinstall 8252
(add
hardware).
Thanks in advance.

The driver for the PXI-8252 is included natively in Windows. Since NI does not provide the driver for this board, the board will not appear in MAX.
Does the PXI-8252 appear normally in the Windows Device Manager? Are you able to communicate to 1394 devices?
If you connect a 1394 device for which NI does provide the driver, that 1394 device should appear in MAX. For example, if you connect a 1394 camera that is supported by NI-IMAQ for IEEE 1394 then the camera should appear in MAX.

Cannot see files burned with Vista

I burned some photos to a DVD using Windows Vista, but I cannot see them in Finder. All I see in Finder is a "Recordable DVD" with nothing in it. If I do "Get Info" I see the following:
General:
Kind: Folder
Size: Zero KB on disk (Zero bytes)
Name & Extension:
Untitled DVD.fpbf
Burning:
Device: HL-DT-ST DVDRW GSA-S10N
Media capacity: 4.37 GB
Content size: 1.3 MB (i.e. the photos are there! somewhere ...)
Now, "Disk Utility" shows the following info:
Name : HL-DT-ST DVDRW GSA-S10N
Type : Disk
Disk Identifier : disk1
Media Name : HL-DT-ST DVDRW GSA-S10N Media
Media Type : DVDROM
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Device Tree : /PCI0@0/PATA@1F,1/PRID@0/@0:0
Locked : Yes
Writable : No
Ejectable : Yes
Mac OS 9 Drivers Installed : No
DVDROM : Yes
Optical Media Type : DVD+R
Device Type : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW
Location : Internal
Total Capacity : 4.4 GB (4,700,372,992 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Any ideas of how to solve this?
Thanks!

I have a similar problem with CD's created with Vista, but if the preferences are set correctly in Vista, compatible CD's and DVD's can be created.
Following is from Microsoft:
http://windowshelp.microsoft.com/Windows/en-US/Help/2af64e60-60aa-4d79-ab6c-3a5d b5806cbe1033.mspx
Understanding the difference between the Live File System and Mastered disc formats
If you have burned CDs using Windows XP, you are already familiar with the Mastered format. The latest version of Windows offers a new format, called Live File System. Discs that use the Live File System format are often more convenient because you can copy selected files immediately and as often as you want, as if the disc were a floppy disc or USB flash drive. On the other hand, Live File System discs can’t be used in all computers and devices. Use this guide to understand the difference between Live File System and Mastered discs:
Discs formatted with the Live File System option:
• Work like a USB flash drive or floppy disk, meaning you can copy files to disc immediately without having to burn them.
• Are convenient if you want to keep a disc in the burn drive and copy files whenever the need arises.
• Are only compatible with Windows XP and later versions of Windows.
Discs formatted with the Mastered option:
• Don’t copy files immediately, meaning you need to select the entire collection of files that you want to copy to the disc, and then burn them all at once.
• Are convenient if you want to burn a large collection of files, such as a music CD.
• Are compatible with older computers and devices such as CD players and DVD players
Why are there different versions of the Live File System format?
Each version of the Live File System format is compatible with different operating systems. Depending on which computers you plan to use a disc in, you might need to select a different version of Live File System. If you plan to use your disc on the latest version of Windows, however, you will never need to change the version of Live File System you use. If you need to make discs that are compatible with earlier versions of Windows, use the table below to select the right Live File System version for your needs:
The following table describes Live File System versions and their appropriate uses.
Live File System version Best for
1.02
This format can be read on Windows 98 as well as many Apple computers. You should use this version if you need to format DVD-RAM or MO (Magneto-optical) discs.
1.5
This format is compatible with Windows 2000, Windows XP, and Windows Server 2003. It might not be compatible with Windows 98 or Apple computers.
2.01
This format is compatible with Windows XP and Windows Server 2003. It might not compatible with Windows 98, Windows 2000, or Apple computers.
2.5
This format is designed for the latest version of Windows and might not be compatible with earlier versions of Windows.

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

I switched from an iPhone to a Galaxy s4. Everything seems ok except text messaging with people who have an iPhone. I can send them a text, they can see it, but I cannot see what they text back. What can I do please?

I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?

Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Cannot see table in sql developer or sql plus

I have created a record in application designer. I have then built the table. I can close the record and then find it again in application designer. But if I go to sql plus or sql developer, I cannot see it. Am I missing a step?

You probably can see all the tables of sysadm because someone else give you proper grant for that on existing sysadm's objects.
For the new or modified object (drop+create) you should :
1. connect as sysadm and run
grant select on new_table_name to your_own_user;2. connect with your own user and run
create synonym new_table_name for sysadm.new_table_name;Then you'll be able to query that table without using schema name alias.
Some admin have also a ddl trigger to make it automatically.
You could also work through a role and public synonym if more than one user needs to access sysadm's objects.
Nicolas.

I cannot see XMLType table in sql*plus

Hi,
Although I have wokred extensively with Oracle, I am new to Oracle XMLdb. My problem is I cannot see the XMLType tables created under my schema. I can see the tables when I do a select from user_xml_tables. But if I do a 'desc' or 'select from', I get ORA-04043 or ORA-00942. I can desc an XMLType table owned by xdb. I am using Oralce 10g. Please provide a solution asap as a customer is waiting on this.
Thanks,
Jayati Ray

Raghu !!
GREAT!!!
It was a BUG in Oracle sql developer, I installed the new version v3.0, It WORKS like a CHARM.
Thanks a million for your help!!!
Cheers
Tony

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

I cannot see my Hotmail saved messages on my iPad 4. I do not have this problem on my iPad 2. All settings look identical.

I cannot see my Hotmail saved messages onmy iPad 4. I do not have this problem on my iPad 2. The settings appear identical.Any suggestions to cure the problem? Thank you.

My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
Kind regards,

On my Mac pro I cannot see my iTunes library in my slideshow as a music selection

I cannot see my iTunes library in iPhoto to add music to a slideshow

Hi Mary3400,
I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
iPhoto '11: Add music to a slideshow
The top section explains how to, the second section is for if you don't see your iTunes library as a source.
Best regards,
Nubz

My Board cannot see my P-ATA 80GB WD HD

Similar Messages

Maybe you are looking for