My bookmark seperators in a newer version of Firefox are too light. I seem to remember in older versions they were much darker. How can I make them dark again. Now I can hardly see the seperator.
How can I make the bookmark separators dark? They are very light and I can hardly see them. I seem to remember that in older versions of FireFox they were much darker and easier to see.
On an older 1.5GHz PowerPC G4 mac, and on a
newer iMac 2.4GHz Intel Core 2 Duo
both running OSX10.5.8, and using the default FF 3.6.6 theme.
The separator lines are so faint as to be not there, giving the impression of just a big gap in the menu being displayed.
Similar Messages
-
With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.
Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian. -
I've had Firefox installed on this computer for a couple of years, but only really started using this computer in the last 6 months. Originally Firefox 14, then Firefox 17.0.01, then finally 19.0
It crashed yesterday on starting, I uninstalled and reinstalled and same issue. I regressed back through version 17.0.0.1 and Firefox 14. I updated Shockwave, Flash, Java. I also uninstalled Divx, AC3 and Adobe Reader (recent installs/updates)
Updated MIcrosoft security essentials and ran a scan, no issues discovered. Updated and ran Superantispyware and found 1 Trojan which I removed.
Crash reporter comes up as soon as the firefox link is actioned. Can start firefox in Safemode.please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683] -
Pages: how can I see the structure of a document?
Hi, I'm a new user, I just bought my first mac last week.
I have a problem with Pages. How can I see the structure (organization) of the document I'm working on? I mean headings, headings 2, etc? In Microsoft Word you see it on the left. I don't mean thumbnails, but the construction of the document.
I know how to mark headings and other parts of a typical document but how can I see the structure afterwards?
Thanks in advance.What you are asking for is Outlining, and that has been removed from Pages 5.2 along with 110 other features.
Use Pages '09 if you can.
Peter -
How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.
Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you. -
my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario -
I am new to Photoshop Elements. How can I see the exif data of my photograph?
I am new to Photoshop Elements. How can I see the exif data of a photo?
I have Elements 10. Sorry I am really struggling with the programme and I
dont see the word Menu anywhere on the editor screen.
Rev. Dr. Jill Morley
PO Box 51059
Musgrave Rd.
Durban.
[email protected]
0837791978 (c)
0312080473 (h) and (f) -
How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?
Nah. Raw support is version specific and that extends to Bridge as well. Older versions simply won't handle new cameras. If this is important to you, you will have to use Bridge CC.
Mylenium -
How can I see the alpha channel in the channels palette?
Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources gFormatRecord->resourceProcs->getProc
#define gAddResource gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
gFormatRecord->maxData = 0;
static void DoReadStart(void){
char header[2];
ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
// Read the file header
*gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
if (*gResult != noErr) return;
ReadSome (sizeof( header ) * 2, &header);
if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
int headerID = CheckIdentifier (header);
if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
(const char*)gMxiInfo->filename,
gMxiInfo->width, gMxiInfo->height,
gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
gMxiInfo->scattering,
gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
gMxiInfo->availableBuffersMask,
gMxiInfo->widthPreview, gMxiInfo->heightPreview,
gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
// We will use that string to obtain later the desired extra buffer.
gMxiInfo->extraBuffersList[count] = "ALPHA";
gMxiInfo->hasAlpha = true;
count++;
else{
gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
gMxiInfo->mode = plugInModeRGBColor;
break;
case 16:
gMxiInfo->mode = plugInModeRGB48;
break;
case 32:
gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
// Preview always RGB8.
imageSize.v = gMxiInfo->heightPreview;
imageSize.h = gMxiInfo->widthPreview;
gFormatRecord->depth = 8;
gFormatRecord->imageMode = plugInModeRGBColor;
gFormatRecord->planes = 3;
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 2;
gFormatRecord->colBytes = 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
gFormatRecord->planeBytes = 1;
else{
// Configure the layers. All RGBA32.
imageSize.v = gMxiInfo->height;
imageSize.h = gMxiInfo->width;
gFormatRecord->depth = IMAGE_DEPTH;
gFormatRecord->imageMode = gMxiInfo->mode;
gFormatRecord->layerData =
2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
gFormatRecord->planes = 4; // RGBA.
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 3;
gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->transparencyPlane = 3;
gFormatRecord->transparencyMatting = 1;
gFormatRecord->blendMode = PIBlendLinearDodge;
gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
return;
/// Called for prewiew only.
static void DoReadContinue (void){
// Dispose of the image resource data if it exists.
DisposeImageResources ();
if( gFormatRecord->openForPreview ){
VPoint imageSize = GetFormatImageSize();
gFormatRecord->data = gMxiInfo->bufferPreview;
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
if( gFormatRecord->data != NULL ){
delete[] (Crgb8*)gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
//DoReadICCProfile ();
static void DoReadFinish (void)
// Dispose of the image resource data if it exists.
DisposeImageResources ();
WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
if( gMxiInfo->lightNamesList[i] != NULL ){
delete[] gMxiInfo->lightNamesList[i];
gMxiInfo->lightNamesList[i] = NULL;
delete[] gMxiInfo->lightNamesList;
gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
delete[] gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
delete[] gMxiInfo->filename;
gMxiInfo->filename = NULL;
if( cMax != NULL ){
delete cMax;
cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] =
((float*)gFormatRecord->data)[ i * 4 + 1 ] =
((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
// Set the layer name.
gFormatRecord->layerName = new uint16[64];
gFormatRecord->layerName[0] = 'B';
gFormatRecord->layerName[1] = 'a';
gFormatRecord->layerName[2] = 'c';
gFormatRecord->layerName[3] = 'k';
gFormatRecord->layerName[4] = 'g';
gFormatRecord->layerName[5] = 'r';
gFormatRecord->layerName[6] = 'o';
gFormatRecord->layerName[7] = 'u';
gFormatRecord->layerName[8] = 'n';
gFormatRecord->layerName[9] = 'd';
gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
void* lightBuffer = NULL;
void* alphaBuffer = NULL;
byte foob;
dword food;
// Get the light buffer.
bool res = cMax->getLightBuffer(
(char*)gMxiInfo->filename,
gFormatRecord->layerData - 1, IMAGE_DEPTH,
lightBuffer,
gMxiInfo->width, gMxiInfo->height, lightName);
if(!res){
*gResult = readErr;
return;
if( gMxiInfo->hasAlpha ){
// Get the alpha buffer.
res = cMax->getExtraBuffer(
(char*)gMxiInfo->filename,
"ALPHA", IMAGE_DEPTH, alphaBuffer,
food, food, foob);
if(!res){
*gResult = readErr;
return;
else{
alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
for( int i = 0; i < nPixels; i++ ){
// Only need to set the red channel.
((float*)alphaBuffer)[ i * 3 ] = 1.0;
// Put them together.
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] = ((float*)lightBuffer)[ i * 3 ];
((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
delete[] (float*)lightBuffer;
delete[] (float*)alphaBuffer;
// Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
*gResult = userCanceledErr;
return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
delete[] (float*)gFormatRecord->data;
gFormatRecord->data = NULL;
if( lightName != NULL ){
delete[] lightName;
lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance. -
For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?
For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?
-
Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
How can I see the quantity of battery cycles on Satellite U200-181?
I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
How can I see the quantity of battery cycles on my laptop?You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
My Tecra M1 is about 4 years old and still working with original battery.
Your question is pretty unusual and I am really interested about further comments. -
I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select ▹ Restart from the menu bar. -
How can I see the total amount of songs in itunes?
How Can I see the total amount of songs I have in itunes 11.0.1.12? Totally different from older version.
From the menu bar, select "View' then "Show Status Bar"
-
How can I see the contents in a Ref Cursor
I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg
Maybe you are looking for
-
I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper
-
Distribute with Reference Data
Hi Folks, I have trouble getting the distribution function to work. I want to distribute the plan data to a more granular level (from Product Family to Product Platform) using the previous year's actual sales data. I have setup a plng. function of ty
-
Does anyone can use time capsule without connection breaks?
if I backup more than 100 mb, the connection via wifi breaks and i can not find the time capsule. either i have to restart computer or time capsule. i use mac lion. time capsule 1 st gen, 500 g
-
My ipod charger cord won't work unless I put presure on it
This is my second iPod touch I've got, first one had a home button problem and got a new ipod and now it's my charging/syncing system not working, home button won't respond until I press real hard and the earphone port won't work, I can't hear. I nee
-
CUPS Causing DC 100% Utilisation
I have a very strange one here, and before I delve too deep into messaging I wondered if there were any thoughts. Scenario. CUCM 7, CUPS 8, Unity 8 UM partnered with Exchange 2010. We noticed that the DC that CUPS was pointing to in the LDAP integart