My bootup screen apple logo is black and background is white

I asked my friends most of them are normal which is apple logo is white and background is black.

It is OK. There are two kinds of restart that iOS 7 does. The white background/black logo is a quick form of restart. Some of the accessability features require a restart of the device and it appears that restart is a quick version compared to completely powering off and rebooting (Black background/white logo).

Similar Messages

About imac (early 2008 24") stuck on grey screen apple logo spinning wheel

HI all just wondering if any body has experienced the grey screen apple logo spinning wheel and also switches off and back on all by itself after 5-10 minutes in the past or recent.
how did you get on did you sort it?would like to read some feedback on this subject thanks

Generally that indicates a serious problem with the hard drive.
Power down, hold alt key at power on, what shows as boot choices?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Report what happens or doesn't please.

I was trying to update my Ipad to IOS 8, the screen is all black with the apple logo on it and the progress bar is stuck,

I was trying to update my Ipad to IOS 8, the screen is all black with the apple logo on it and the progress bar is stuck.
I can't turn it off, and when i connect it to itunes, it doesn't display

Try putting the iPad in restore mode and see if iTunes recognizes it. The steps are below:
Turn your iPad off.
Hold down the Home button and plug it into your computer. Keep holding the Home button until you see a screen telling you to connect to iTunes.
iTunes should show you a popup saying that there is an iPad that is in Recovery Mode and needs to be restored before you can use it. Click OK.
Click on Restore iPad

My I Phone 5 Screen shows bright white apple logo on black background continuously

My I - Phone 5 is continuously showing white apple logo on black background. It started this morning after my phone was charging overnight.

Try a hard restart, hold down the HOME button and the SCREEN LOCK button simultaneously until the screen turns off and release only when the Apple logo reappears.

Gray screen, apple logo and spinning gear hang at start up

after a lengthy round of "bejeweled", i let my imac fall into screen saver mode. when i tried to log back in, i tapped the mouse and the imac flashed as it does when actuated outside a dialogue without clicking the okay button, and immediately returned to screen saver. i then manually shut down and restarted to the gray screen, apple logo and spinning gear hang. i then inserted the leopard install dvd, manually shut down and restarted pressing the option key and selected the install disc. it booted as usual. i selected the language preferred, used the utility drop down menu and selected DU, then selected the hard drive and verify permissions to reveal a pop up "Error: The underlying task reported failure on exit. Permissions verification complete." i immediately selected repair disc, and breathed a sigh of relief with the notification "appears to be ok". then utilities/start up disc/macintosh hd/restart. still get the hang. i have repeated this process several times, also resetting the PRAM as well to the infinite hang. as a matter of fact, the gear has been spinning the entire time creating this post. needless to say, i am truly at a loss. SOS!!!!!!! Please!!!!! SEND LAWYERS, GUNS AND MONEY!!!!

i have perused some of the threads posted per this topic and decided to attempt an "archive and install." i also have a 620gig acomdata external drive with close to a carbon copy of my internal. a few short minutes into the install, the imac reveals a pop up stating it cannot install some files on the hard drive, contact the software manufacturer or restart and try to install again. the internal drive is a 160gig with only about 60gigs of room, so i tried to archive and install to the acomdata instead as it has 180 gig of free space. i get the exact same dialogue once again. restart and a third attempt only archive and install will not highlight, only first time and/or erase and install. further, start up disc shows only the install disc and network as choices. so i attempt first time install on both drives and get the same pop up message again. DU recognizes both drives although verify/repair permissions does not highlight, but not start up disc.
i'm trying not to become frantic, but my patience is threadbare. i am in desperate need of sound advice as to what i need to do.
thanks again in advance,
bradley

TS1369 i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes

i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

Start Up Issue-Gray Screen, Apple Logo And Cognition Wheel-Blue screen before start up at times but no longer starting up beyond gray screen and cognition wheel

Power button pressed.
Start up light okay
Chimes okay
Gray screen, apple logo and cognition wheel spinning and the loading bar underneath loading 1/10th of the way.
Loading bar doesnt load fully and then disappears.
Gray screen remains with apple logo and cognition wheel only.
No start up to desktop. Before start up to desk top which is not happening any more a blue screen appeared before the desktop appeared. When start up complete the ' Finder' had no responded and did not work' Multi coloured loading pointer continually turned. ' Network' could not be loaded in 'System Prefrences'.
Ive tried reading and following propts...Results NVRAM/PRAM - Logic board battery replacement. How much will this cost?
Hardware test - No problem found
Safe Boot - ' volume Machintosh HD could not be repaired.'
' Run time corruption detected on Machintosh HD device'
What do you suggest aside from taking it to a apple store?
Thanks Stephen

Lion or Snow Leopard? If Lion, boot into your Recovery partition (hold down the Command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair the boot volume.
If Snow Leopard, use the installation disc and use Disk Utility in the same manner.
Clinton

Mac book pro is not beinng switched one but screec back light (apple logo) is lighting and screen is also in dim light os x yosemite is not run

my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt?
hy my mac book pro with retina display is not getting login prompt

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite
What does the screen show - anything?

Imac won't start beyond white screen apple logo and circle

Imac won't start beyond white screen, Apple logo and spinning circle

Follow the steps at > Mac OS X: Gray screen appears during startup

My mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt. what shall i do for this issue?

my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt

Gray screen at start up?
http://support.apple.com/en-us/TS2570

I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution

I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution,,what can i do?

See if this page helps : http://support.apple.com/kb/HT4097 - it mentions 'showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.'

My battery died, I charged phone now black screen apple logo blinking. How do I fix?

My battery died, I charged phone now black screen apple logo blinking. How do I fix?

If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
iPhone - Contact Support - Apple Support

I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

Clicked to install software update, now it just has a blue screen. I have tried resetting by holding down on/off and home at same time, apple logo shows up and then goes back to blue screen. What is wrong??

I clicked on the software update, acted like it was updating, and now it just has a blue/turqois screen. I have tried to reset it by holding down the on/off button
and home button at same time, and the apple logo shows up and them goes back to the same screen. Please help...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My bootup screen apple logo is black and background is white

Similar Messages

Maybe you are looking for