My bought books are not shown in ADE!

I have used ADE for since 2009 but rarely in the last year.
Today I have bought a new ebook reader.
I opened ADE and authorised my new reader. Then I wanted to transfer the ebooks bought in the past to my new reader.
Only then did I notice that ADE does not list any of my ebooks any more. It says 0 ebooks.
I'm shocked. Especially as I don't know whom to contact because of this.
Help!

Are you still on the same computer and haven't done any significant reinstalls since you last used ADE?
The ADEPT DRM infrastructure doesn't keep cloud copies of your books so that you can automatically reload books on a new computer or after changes (or ADE errors),
but as long as you have the .epub files and use the same Adobe ID you should still be ok.
You may have to reimport them to ADE.
It may be that ADE screwed up an update from an older version to the newer (and very buggy) V2.0.
Two more general suggestions that may help to get things working again if you can't reimport books.
~~~ 1
There are lots of bugs in ADE2.0.  Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
~~~ 2
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

Similar Messages

  • Books are not shown in the TOC of the printed document

    Hello,
    I am using Robohelp 10. I have a project with several books and topics. When I generate a web help, everything is fine. But now, I have to generate a printed version of it. My problem is that on the table of contents of the generated document, the books are now shown. I need those books to be shown. Please advise.
    I can not post the project I am using so I just used a very simple project which I created.
    This is the original TOC.
    and this is the resulting TOC in the printed document.
    The books should still be part of the contents same with the original TOC.
    I do not know what is wring with my set-up since I only used the default one. It will be great if you can reply to me ASAP since we need to publish our help document. Thanks a lot!

    OK, the samples are a known quantity and normally generate correctly. Thus we know it is something about your environment, assuming you used the supplied style mapping template?
    In the last page of the print dialog, are you using the supplied Rh Style Mapping template?
    After generating with whatever you are using, have you tried right-clicking alongside the TOC and choosing Update Field. That might correct the TOC.
    What version of Word are you using?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • File Systems are not shown in CCMS Monitoring

    Hi Gurus,
    We have installed all SAP components in Solaris 10 zones including Solution Manager.
    Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
    The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
    Thanks,
    Pj

    Hi,
    You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
    Note 870652 - Installation of SAP in a Solaris 10 zone
    Note 724713 - parameter settings for Solaris 10
    Hope this will solve your problem.
    --Ragu

  • Why photos are not shown in pdf

    in some pdf's the pictures and photos are not shown, do you know why

    Refer this article
    The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
    http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • 5800 Xpress Music, Messages are not shown in my in...

    Hi,
     Please get me out of this issue. Suddenly messages( inbox, sent items, folders also) are not shown in my mobile. When I checked memory details I found messages occupied some memory in my memory card. Where I can check my messages in memory card. How do I get my messages back.
    Thanks,
    Balu

    Messaging-->Options-->Settings-->Other-->Memory In use..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Sometimes, some images are not shown...

    Hi!
    Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

    I am having a similar problem so maybe someone can help me too.
    I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
    I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
    I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
            MediaTracker tracker = new MediaTracker(applet);
            for (int i = 0; i < img.length; i++) {
              img[i] = applet.getImage(urlCodeBase, imagePath + images);
    tracker.addImage(img[i], i);
    tracker.waitForID(i);
    if (tracker.isErrorAny()) {
    System.err.println("Error loading image " + images[i]);
    My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
    Any ideas would be a great help!

  • The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

    I have the same problem on all my computers, one running Windows 7 and two with Vista.
    The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

    It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox to save that setting.<br />
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    See http://kb.mozillazine.org/Corrupt_localstore.rdf

  • PDFs are not shown correctly at more than 150% size

    Hi,
    we use Adobe Reader 8.1.2 and we can´t change it in our company.
    we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
    at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
    Does someone have the same problem AND a solution?
    Hajo

    Hi,
    I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
    I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
    Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
    I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

  • Embedded Fonts are not shown anymore

    When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

    Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

  • [Solved] Some icons are not shown in certain websites.

    For example:
    trello.com
    gist.github.com
    is like this:
    many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
    It also happens to a gitlab server site I set up:
    How can I debug this? Does it happen at your place?
    EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
    Last edited by xgdgsc (2013-06-08 12:38:08)

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

    Hello,
    Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
    Is there a solution to solve this issue?
    Thanks.

    You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
    Mylenium

Maybe you are looking for

  • Page numbers on ALL pages

    I'm trying to insert page numbers on ALL pages in a document in InDesign CS4. But I can only get page numbers to the page 74? This is so annoying, and it's due on monday, and I'm running out of time. Can anybody tell me, short and easy, how I can get

  • Error Ora-3134, connection to Oracle 9.2.0.6

    Hi, I want to create connection from Windows 2008 server 64 bit to Oracle database version 9.2.0.6. I have installed "Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio" where in installation instruction I have found f

  • How to find the value in the table in database ?

    Hi, Could you please advise me, How to findout the data-value in the table in database ?

  • OC4J JNDI lookup problem

    I'm developing a simple struts app in JDeveloper where the model component connects to an Oracle database. The webapp works fine when I deploy it... I just want to get it running locally in the embedded OC4J server. I get this stack trace error: java

  • From iPhoto to Aperture and now back to iPhoto?

    Hi, all: About 15 months ago, I bought and dl'd a copy of Aperture from the App Store because it was so much cheaper than retail.  What I've realized, though, is that I bit off more than I can chew, in terms of features and learning curve, and I woul