My brand new Ipad 2 is not charging the battery with py PC thru USB. Is that normal? When I plug it directly into the wall, it works... Thanks! Sam

My brand new Ipad 2 is not charging the battery with py PC thru USB. Is that normal? When I plug it directly into the wall, it works... Thanks! Sam

It talks extensively about charging in the user guide, and how USB ports on PCs and older Macs may not provide sufficient power to charge the iPad.  The user guide is available for free from the iBook store (accessed directly via the iPad iBooks app).
My iPad charges fine when plugged in to the back of my iMac, but I would always prefer to use the mains adaptor to save the strain on my USB circuits (which can wear out if used heavily to power external devices).

Similar Messages

  • My itouch just crashed unexpectantly. I can't open the itouch up. Also,nothing would show up even when i plug it in into the computer... What do I do now? please help! Thanks!

    My itouch just crashed unexpectantly. I can't open the itouch up. Also,nothing would show up even when i plug it in into the computer... What do I do now? please help! Thanks!

    Well plug it in again, and then hold the "Lock" and "Home" button at the same time for about 10 seconds. See if that helps.

  • TS3274 My brand new iPad will not charge. What is wrong? What should I do?

    Just took it out of the box. It's the best one. It remains at 41% after being plugged in overnight.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
    Since you are a new iPad owner .....
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Brand new phone will not charge after battery low

    My daughter has had her phone 4 days and it has only today died completely it had icon in corner saying off so I put it on charge. But where the battery icon was there was no sign to say it was charging. I left it an hour and nothing so I did a battery pull and it rebooted but then died completely. Still no light on to say charging. I also read on another forum to plug charger in while battery removed but still nothing at all. Also before this when she put her simcard in which is a contract bb sim it was saying it wasn't connected to bb Internet and bbm was not working. Please help

    On your Manage Connections screen, click on the Services Status.
    What is the status of the BlackBerry Internet Service?
    Do you see the BlackBlerry dots logo at the top right of the home screen next to the signal bar indicator?
    If not, and if the BIS status is not connected, could be the plan is not yet provisioned by Tesco.
    Then, try this: 
    On your BlackBerry device, go to:
    1. On OS5 devices: Options > Advanced > Host Routing Table > Menu > Register. On OS6 devices: Options > Device > Advanced > Host Routing Table
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iPod went into recovery mode and I knew I had to restore it. However, when I plug it into the computer, nothing comes up on the iPod and my iTunes doesn't open. Except, when I plug my iPod into my wall charger, it lights up. What can I do to save it?

    For some reason, my iPod doesnt power up when I connect it to my computer, but it does if I plug it into my wall charger.
    I need to restore it as it went into recovery mode, what is it that doesn't allow it to connect to my computer and what can I do to fix it?

    You can re-download for free (As with the free music the bill just reads .00) .
    Try it with one and see for yourself.
    Oh yes, spare yourself future grief since this doesn't apply to music and video, get an external HD to back up iTunes and use it!

  • TS3274 brand new ipad. trying to charge it but keeps saying "not charging"  - am at 3%!

    Brand new IPad - will not take a charge?  Am at 3%!  Any ideas?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • My brand new PB will not charge when in standby or when on

    I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

    Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
    1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e.  it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
    2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
    3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
    4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
    5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
    6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
    Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

  • HT4060 My new iPad is not charging at all no messages

    My new iPad is not charging at all no messages on pc and not with 10w wall adapter either and not syncing to iTunes on my PCM

    Note that in some PCs not all USB ports have current/charging capabilities. A colleague had the same issue with a Dell desktop tower the other day, only the leftmost USB port on the frontside had charge capabilities.

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My ipad is not charging while connected to any device via usb cable

    my ipad is not charging while connected to any device via usb cable

    If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

  • HT201269 I have a brand new mac book pro. I want to get everything from my iPhone onto the mac book music,pics etc. I'm worried if I plug my phone into the mac book I will loose everything on it , as the mac book has literally nothing on it. How can I get

    I have a brand new mac book pro, I want to plug my iPhone into it & transfer everything from it onto the mac book, pics,music etc. I'm worried if I plug my phone into the Computer I will loose everything. How can I make sure this doesn't happen?

    When you plug your iPhone to Mac,click the Summary button and select “Manually manage music and videos".Then iTunes would never delete your original music.
    The most easy way to solve your problems is to move your music to your new Mac.Please refer to this article from Apple.com
    http://support.apple.com/kb/HT4527
    More review:How to transfer iPhone music to Mac

  • My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

    The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS  6.1.5

    You do have iTunes 10.7 or later on the computer, right?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

    When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • HT1386 i downloaded the new version of itunes. when i plug my phone into the computer to connect its saying my device is synced with another itunes library. how do i get my old itunes back? or how can i get my old itunes stuff to the new one?

    I downloaded the new version of itunes and when i plug my phone into the computer and try and do something in itunes it wont let me because my device is synced to another itunes library. how do i get my old itunes back? or how can i sync my stuff into the new itunes with out deleting anything off my phone? HELP

    Copy the iTunes folder from the old computer to your new one.

Maybe you are looking for

  • Error during deploying using sapdeploy ant task

    I am attempting to deploy a simple service which I have created using Dev studio. Instead of deploying using Dev studio, I want to use ant task for the same. This is the output I see in the console: deploy: [sapdeploy] Starting deployment with the fo

  • InDesign CS4 PDF Export Issue

    Hello everyone, I'm new to Adobe and this forum so if I screw something up, please let me know. My System: Intel Core 2 Duo E7500 2.93GHz, 3GB Ram, 7200rmp 320GB HDD, XP Pro SP3 Adobe Master Collection CS4 full installation. My Issue: Intermittenly,

  • Custom event handler

    Just curious. I made a custom event handler that is dispatched from within a class when an XML document is loaded. The listener is attached to the instance of that class in the FLA. The attached code to this thread is what is for the class instance.

  • How to get rid of search logos in photographs

    all photos on my home page have a search logo and suggest sites I don't want. How do I get rid of this feature? There are also pop up ads stating I have outdated browser or other annoying lead in to adds. How do I get rid of these or you can keep you

  • How do you to set an limit speed on your router port

    Hi, I got a WRT300N and there 4 port. I like to know if we can set an limit speed on 1 of these 4 port? Example, my port 2 is using for download and I like to limit the speed like 50k/sec. If yes, please could you guide me how do I make the settings?