My brother accidently reset all the system certificates how to restore them?

my macbook pro has all the system certificates reset and i am not able to find any of the system certificates on my keychain. i tried to repair it through keychain and it told me to reinstall the software what should i do ? is there another way out of it.

If you have a backup of your phone that predates the loss of your photos, you would need to restore your phone using the backup, you cannot selectively restore content from a backup.

Similar Messages

Does Firefox reset all the root certificates and root certificate settings whenever an upgrade is installed?

Does Firefox reset all the root certificates and root certificate settings whenever an upgrade is installed?

Root certificates are stored in the file nssckbi.dll and if you've disabled build-in root certificates then it is possible that they get re-enabled. There is however no reason to disable any of the build-in root certificates.
Tools > Options > Advanced > Encryption: Certificates > View Certificates : Authorities

My apple message and contact apps have disappeared from my screen but not from the system. How do I get the icons back?

My apple apps ( contacts and message) are gone from my screen yet I know they're still n the system. How do restore these apps on my screen without resetting whole system?

Settings, general, reset, reset home screen layout.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

I would like to update or upgrarde my iphone from 4.2 to 5.0 or higher how can I do this task A. my phone does not have a "update" setting I was told to reset all the settings to new B. will this earase all my contact, files ,notes emails ??? C.

I want to update or upgrade my iphone 4 to 5.0 or 6 higher how can I do this ? I my unable to sign into Itunes I was told to reset all the settings to "factory" If I reset evevything ,will I loose all my contacts, emails, notes, or any other information that I have saved into my phone (photos, apps, emails, ) Just as if I had a brand new phone ? I am not very experience with computers or high tech devices I would have a difficult time uploading on my computer or tranfering data

Don't reset anything, just connect it to iTunes. If you don't have iTunes on a computer, then find someone who does, turn off auto sync, then connect your iphone and click 'check for updates'. iTunes will download the update, then update that software to your phone. Before you update though, I'd make a backup, just to be on the safe side.

HT201407 hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any id

hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho

I wa aware
I was rather hoping it might generate some info that might be of use to help OP it doesn't make much sense as it stands without a tedious Q&A session

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
B-rock

Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?

Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

When i download itunes on my PC, after verifying all the system requirements, it then says program incompatible. How do i fix it?

When i download itunes on my PC, after verifying all the system requirements, it then says program incompatible. How do i fix it?

What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

TS1368 itunes and app store say cannot connect - I reset all the settings, enabled location services so the

I reset all the settings, enable location services so time and date would be auto, update iOS, re-entered network key - cannot connect to app store continues

You must not be connected to the internet via wifi.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Configuring EarlyWatchAlert for all the systems in the landscape

Gurus ,
In SDCCN can i configure EARLYWATCHALERT session with targethost as SDCC_OSS
now this has been only for production system . can this be done to all the systems in the landscape ?

Hi Susin,
As per me i could say the EWAlert only be configured for your production system rather
than the other systems(Dev/QA) existing in your ladscape.
If you are thinking to schedule this Alert for other products(BI/EP/XI) or for other SIDs,
then yes...please go ahead.
Why i am saying we can only schedule the EWAlert for production system, coz the
the EarlyWatch report uses the SDCC_OSS RFC, which is a copy of the SAPOSS connection. And the target destination refers to SAP's system where one copy of your
weekly shceduled EWAlert report goes to SAP end as well.
Please inform me incase any other queries...
Thank you,
Tilak

How to get the local lan connecting all the system names ?

how to get the local lan connecting all the system names using java?
any body know then send the coding or solution

This question is asked and answered repeatedly. Search the forum.

I was painting in photoshop and accidently rotated all the layers and the canvas how do i realign it?

i was painting in photoshop and accidently rotated all the layers and the canvas. how do i realign them?

dubrox666 wrote:
Image rotation works if the canvas isn't rotated, the canvas was rotated by acciedent (gesture on my tablet) and image roate dosen't fix the canvas when it is rotated, even my guides were coming in crooked, image rotate rotated my image but not the canvas, it happened to me again so i reverted to my previous save, even my instructor dosen't have an answer?!!
Risto
Good gracious. It sounds like you were able to rotate the canvas a more or less exact multiple of 90° or you'd have spotted that it was skewed. I just tried it using the r shortcut, and while it is doable, it is not particularly easy to rotate the canvas to a point where it could fool you. What does surprise me, is that while the Options bar shows the degree of rotation while the r key is depressed, I could see nothing on the UI to tell me that the canvas was rotated. That's something that you might want to start a thread on the Photoshop Feedback page.
Photoshop Family Customer Community
Anyway, Escape is the usual way to cancel rotate canvas.

My brother accidently reset all the system certificates how to restore them?

Similar Messages

Maybe you are looking for