My browser keeps trying to create new tabs on clicks though I've followed the directions to fix the problem, but it only works for a while.
Things will be working fine...then suddenly I start getting a new tab with every click. I've followed the directions to fix the problem, and usually deleting the mimes.pdf for a full reset works, but I'm getting tired of this. Everything is up to date as far as I can tell, and my virus and malware programs seem to find nothing wrong. I'm getting tired of this...help??
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Similar Messages
-
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3." -
I have my FireFox browser set to delete all the history when I close the window. It was working for a very long time and has recently stopped with no changes to the settings. This has happened once before and I deleted FireFox and re-downloaded it, that solved the problem for a short period of time but the issue has come up again. How can I fix this?
Can you check your configuration again? Maybe something went pear-shaped somewhere. It's located in Tools | Options | Privacy and then click the Settings button (see screenshot).
-
Firefox is not letting me open another tab when I click the button or the 'new tab' in file. I have restarted my computer, installed an update, and I still have the same problem browsing.
In past threads, this problem has been linked with the Ask toolbar.
[http://support.mozilla.com/en-US/questions/784371 I can't open a new tab anymore; what happened? | Firefox Support Forum | Firefox Help]
[http://support.mozilla.com/en-US/questions/788008 New tab button does not work, nor does "Open New Tab" toolbar icon. | Firefox Support Forum | Firefox Help]
And several users mentioned a link between Foxit Reader and Ask toolbar:
[http://support.mozilla.com/en-US/questions/786427 "Open a new tab" is not working in Firefox 3.6.13 on WindowXP NT | Firefox Support Forum | Firefox Help]
[http://support.mozilla.com/en-US/questions/794912 I can't open a new tab | Firefox Support Forum | Firefox Help] -
At the right of the last tab, there was a cross (x). If I wanted a new web site opened while keeping the one I was in, I clicked on this and it opened a new page and I could go to other sites of my choice. The cross is no longer there, and I cannot find out how to open a new tab, and go to a new web site.
You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.<br /> -
Trying to add my new Macbook Air to iTunes match. Process starts but goes nowhere. After some time I get error about iTunes server losing connection. Help! I want to access all my music.
Hi Rob- I'm guessing it has something to do with all the update stuff Apple keeps doing (with Yosemite, etc.,) extremely frustrating - also whenever I load up iTunes on any of my devices- I am asked to enter my passcode- which I will do- then I am asked to do it 2 or 3 more times - right after the other- crazy how annoying something like that can be- I have looked online for solutions- i.e. close out of the account, reset the passcode- all of it- nothing seems to fix that situation either- what I have discovered (playing around) is on my iPhone 6+ if I go to settings and turn OFF iTunes match- then turn it back ON- suddenly all the music that wasn't loaded shows up magically- but I had to do that each time I'd update songs in my playlist on the iMac- then go to the iPhone and turn off the match- then turn it back on- almost like it is resetting things-
-
Control T doesn't work either.
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
I'm starting to feel like there is no hope for my G5. I've updated the os, backed everything up, used the hair dryer and switched out the ram. Still no improvements. I'm just wondering now whether it could be the disk or the logic board.
I guess if it were me I'd try hotter/longer, then never allow it to Sleep except for the Monitor, & set Processor to Highest Energy Saver>Options tab.
If you still want a G5, they've been getting cheaper on eBay & such, here's a 1.8 with bad PSU FOR $85+...
http://www.ebay.com/itm/Apple-PowerMac-G5-1-8-GHz-DP-Dual-Processor-Bad-PS-/1107 15492187#ht_794wt_1398
But the 2.3s were the most reliable G5s overall...
http://www.ebay.com/itm/APPLE-POWERMAC-G5-2-3GHZ-DUAL-CORE-8GB-MEM-500GB-SATA-/3 80363233623
An hour left on this one...
http://www.ebay.com/itm/Apple-PowerMac-G5-Dual-Core-2-3Ghz-2GB-250GB-Super-Leopa rd-A1177-/160680216830?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%26 itu%3DUA%26otn%3D5%26pmod%3D380363233623%26ps%3D63%26clkid%3D4264672915595326464 #ht_6431wt_1165 -
My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks
Bluetooth is only supported for tethering.
Barry -
I have a new ipad, it says I am connected to the internet but will not work. When I attempt to go to a web sight the green bar moves 1/2 inch and nothing.
I have a used linksys router that I got from work. I tried connecting with a older ipad and every thing works correctly. any ideas?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?
It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13. -
Hi,
when i am trying to open a new tab, it's auto redirect to "isearch.claro-search.com/?affID=115131&tt=3312_5&babsrc=NT_iclro&mntrId=8aa792f7000000000000000000000000" this url, pls help me how to resolve it.hello runnu07, you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ search reset] addon or manually reset the new tab page by entering '''about:config''' into the firefox location bar (confirm the info message in case it shows up), searching for the preference named '''browser.newtab.url''' and right-clicking & resetting it to its default value ('''about:newtab''').
-
Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N
Dear all,
i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N,
but the tab is not coming
following is the code snips, please tell where is the error, or some setting needs to be done
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
if sy-tcode eq ' ME21N' OR SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'.
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscriber-name = 'Customer-Data'.
ls_subscriber-dynpro = '0101'.
ls_subscriber-program = 'SAPLMEGUI'.
ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
endmethod.
Regards
SumodhHi...I hv similar requirement.
I need to show a custom field in the screen for the items.
I tried using the methods "SUBSCRIBE" and "MAP_DYNPRO_FIELDS" as explained in the sample code.
Below is my code. I have copied the sample code and changed it lil.
Method "SUBSCRIBE":
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLZMMPO1'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMM_PO_CUST_SCREEN'.
a label can be defined
ls_subscriber-label = text-t01.
the position within the tabstrib can be defined
ls_subscriber-position = 13.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
method "MAP_DYNPRO_FIELDS":
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
*- customer fields
CONSTANTS: mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
LOOP AT ch_mapping ASSIGNING <mapping>.
CASE <mapping>-fieldname.
WHEN 'CLMNO'. <mapping>-metafield = mmmfd_cust_01.
ENDCASE.
ENDLOOP.
I created a function group - "ZMMPO1" and created the subscreen 9000 in that. I placed the custom field in that screen. Tha main program of ZMMPO1 is "SAPLZMMPO1".
I created a structure also - "ZMM_PO_CUST_SCREEN".
I want to know whether this is sufficient to display the tab on the screen or am I missing something.
It is mentioned that the implementation of "ME_PROCESS_PO_CUST" is a pre-requisite.
could you lemme know the process please.
Thanks,
Ram. -
NI Configurator 4.1 - Crash when trying to create custom tab
For some reason I have problems when trying to create custom tab in NI Configurator 4.1.
Every time the result is same: Error - NIFCONF_ERROR_APPLICATION_EXCEPTION - Parameter is incorrect...
Any help in this?
br. JoukoANNOUNCEMENT:
We have just released a new version 4.1.1, which has fixed this issue.
Get download and update through the link below:
http://joule.ni.com/nidu/cds/view/p/id/3320/lang/en
Thanks.
Chris -
Error while trying to create new assignment with supervisor through API
Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best RegardsI think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?
Maybe you are looking for
-
My 160GB classic ipod will no longer connect to iTunes. I'm so depressed. And learning that it is discontinued just shoots another arrow in my heart. So, I made the plunge and bought a 64GB itouch. It *****! I live in the "sticks" with minimal i
-
My MacBook Pro won't start after smc reset
Some of my key board backlights weren't working so I tried a smc reset and now it won't start and the charger doesnt light up 2013 late edition
-
Since I work with a backup-projectfile, premiere stops working reporting a 'debug event'
Hello, Can somebody tell me what the next dubug event means and what to do about it... 'Premiere elements has encountered an error. C:\PRE12\mail\MediaCore\audiorender\API\inc\audiobuffer/audioSubBuffer.I' Because premiere stopped working a sudden mo
-
IDoc was saved but cannot or should not be sent
Hi, I am in we19 While sending an outbound IDOC, I am getting the status as "IDoc was saved but cannot or should not be sent". Kindly help.
-
A second question: I am creating a database of products for my point of sale system. I am using a product list sent to me by a vendor. Can I pull out certain words in their description and add them to a new column. i.e. The vendors' description in