My BT does not display my "Recent Usage"

After a long running saga over a line number change and upgrade of Broadband (WARNING! Do not attempt to have two things changed at once. Change the line number and wait for that to be fully implemented, then upgrade your broadband package - or else.... ) I am now left with MY BT in the Billing area, by clicking on Recent Usage, with only 2 tabs. One is Broadband, the other Broadband Talk. There is no tab for 'Phone'. Yet the charges (premium rate etc) keep increasing (probably correctly) but I can't see the individual calls at all. I have tried ALL the possible ways of speaking with BT and online chat with no effect, despite 'promises' that it is solved.
May be unrelated, but I suspect not, is that under 'My Services' my phone package is shown as 'Weekend and Evenings Free' when I have signed up for 'Unlimited Free'. I believe, but I can't be sure as I CAN'T READ THE CALLS that I am not being charged for daytime calls.
My setup is Broadband Option 2, One Phone line with Unlimited Free calls and paying direct debit monthly. I am currently over £100 in credit so they have put me on a payment holiday until January.
What I haven't mentioned is the 30+ HOURS of trying to sort out my problems (which included the aforementioned line number change) and the ONLY real sense came when I contacted these Forums a few months ago and a Moderator sorted out the number change issue for me.
So the challenges are: 1. Let me see my phone calls I have made
2. If that is not possible, let me know how to completely 'Deregister' from BT so I can start again by Registering and seeing if my packages show up correctly or 3. How do I contact a Phone Company who will be able to let me see online how much I am paying them and for what, 'cos BT certainly cannot.
My Best Wishes to all
Claire

Hi Claire,
If you can send in your details we'll be able to check this.
You can get our "Contact us" form by clicking on my username, it'll be under "About me" on my profile page (top-left of the page).
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

In 10.10 the "recent documents" pulldown does not display actual recent items--it shows the same items time after time. How can I fix that?

In previous versions of OS 10, the "recent items" pull down from the Apple icon (top left) actually showed recent items. In this version, 10.10, the same items display time after time rather than displaying recent items. How can this be fixed?

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.corerecents.recentsd
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

RH7- Insert action does not display window to select the file.

I have a nightmare situation with RH7 with no clue to resolve. What are my options to fix this
I am having trouble with robohelp, selecting insert action does not display the pop up window. This prevents functions such as inserting images & files, importing files and creating hyperlinks to documents created in word, frame maker.
when I perform this action, the pop up window appears virtually but is not visible to make the selection and RH freezes.
I have to end the process or press esc to find some work around - so far none available
Please help.

Welcome to the community.
Have you recently gone from a dual monitor setup to a single monitor? When this happens, RH can sometimes keep tossing dialog boxes over where it thinks the second monitor is. I typically use a program called ForceWindowVisible (get it here) to push wandering dialogs back into view. Give that a try and see if it works. Hope this helps,
Ben
GryphonMountain.net

JavaScript does not display in Design view

Hi,
I am just starting to learn JavaScript so excuse my, maybe stupid, questions.
Why the following code does not display Hello world! in Split view on the "design" side? When I upload the file onto the server and try to view it in the browser everything displays normally.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Homepage</title>
</head>
<body>
<script type="text/javascript">
document.write("Hello World!");
</script>
</body>
</html>

Hi,
This is normal, design view is simply a way of either creating your website using the wysiwyg method or if you code the website it is a way of getting an idea what the site will look like static. Design view doesn't run any scripts, which is why in the more recent versions of dreamweaver we have LiveView which does run the scripts and allow you to interact with drop down menus and the like, which you can't do in DesignView.
Richard

IPod does not display album cover art

I recently updated to iTunes 9 and also bought a new MacBook Pro. Then I synced my old iPod color with my new Mac. Since then my iPod does not display the album art work anymore. I was looking through iTunes 9 for the option to display the artwork on the iPod because I remembered that setting from older versions but could not find it. Does iTunes 9 just asume my iPod can't display covers because it is a 4th gen even though it is the color version?

hi mduran, no i could not find any solution. My iPod (60gb, probably the same as yours) is filled to the top and has been before the iTunes update and then it worked fine. I think this is a bug in iTunes. It's interesting to see that this happens in the Mac and Windows version of iTunes. Is there any way of telling Apple about that so it will be in the next update?

Followon Documents does not display PO

Hi,
We use SRM 4.0 SP13 with classic scenario.
We recently upgraded backend to ECC 6.0 and ran into an issue where we do see PO replicated to SRM when viewed using BBP_PD but it does not display under Follow-On document---> History.
I looked at some notes, but not sure if they help as only I1113 is only active.
Note 729967 - Shoppng cart:Status I1111,no follow-on docs->analysis report
Also any other notes that could be useful.
Note this issues is consistent and not for a few SCs.
Thanks,
Nikhil

Hi
It turns out that SRM does not support "stock transfer", even though this may be supported by other SAP Applications.
SAP suggested In order to resolve this issue, you could enter the following codes:
We plan to try it later after our current release is implemented.
In MAP_ITEMS (LBBP_PDMAPF01) you can find this coding:
LOOP AT i_be_items WHERE ITEM_CAT EQ c_item_cat_mat OR
ITEM_CAT EQ c_item_cat_third.
In your case, we enter this coding with the following:
i_be_items[1]-item_cat = 7 -> Stock Transfer
I would suggest that you try a modification here:
LOOP AT i_be_items WHERE ITEM_CAT EQ c_item_cat_mat OR
ITEM_CAT EQ c_item_cat_third OR
ITEM_CAT EQ 7. " Modification for Stock Transfer
Thanks,
Nikhil

When I test the web dynpro page, the browser does not display it !

Hi all,
I have (SAP EHP 2 for SAP NetWeaver 7.0) trial version installed in my laptop. Lately, I took course NET310 about web dynpro. I started doing the exercises but when I test my work, the browser (Internet Explorer 8) does not display the page I created but it displays a page has the following message (Internet Explorer cannot display the webpage). When I installed the SAP, one of the requirements was (Domain), so I entered one but the one I entered does not exist. If this is the issue, then I have to create a domain with the same name but how can I do this in my laptop? (my laptop has Windows 7)

Hi Anil
the page shows the following:
Bar Address:
http://tip-pc.ahmed.com:8000/sap/bc/webdynpro/sap/znet310_intr_00?sap-language=EN
Page:
Internet Explorer cannot display the webpage
What you can try:
Diagnose connection Problem (button)
More information
This problem can be caused by a variety of issues, including:
u2022Internet connectivity has been lost.
u2022The website is temporarily unavailable.
u2022The Domain Name Server (DNS) is not reachable.
u2022The Domain Name Server (DNS) does not have a listing for the website's domain.
u2022There might be a typing error in the address.
u2022If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
For offline users
You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds
1.Click the Favorites Center button , click Feeds, and then click the feed you want to view.
To view recently visited webpages (might not work on all pages)
1.Click Tools , and then click Work Offline.
2.Click the Favorites Center button , click History, and then click the page you want to view.

T500 Windows 7 - Screen does not display - Switchable Graphics Problem

Hello,
I have a T500 and I recently upgraded to Win7. Evrething was fine until I tried to install the drivers for the graphic cards and went on in BIOS and selected to use the integrated graphic card option. After reboot everything turns on except for the display. The fan works, everything looks OK but the screed does not display anything. I even tried to boot directly from the Win7 disk and install a fresh copy (maybe it would have been a better idea to do that in the first place) but it's the same, nothing happens. I don't know what else to try.
Please help.
Thank you.

UPDATE: I just came back after a visit to the apple service provider here in New Delhi. They have replaced the logic board on my macbook pro and guess what? the situation is still the same. No difference what so ever as far as the screen resolution is concerned. I can still see those black bars in the exact same places i.e. the right hand side as well as on the top of the screen. Even the size of the black bars are still the same.
I am so upset right now. After trying my best in order to solve this problem I went to the AASP with high hopes. I was very confident that after replacing the logic board this annoying problem would go away but unfortunately that's not the case. Even the Apple Engineer was clueless on how to solve this problem.
I think I'll call apple care and speak to the customer relations regarding a replacement.
If any of you can come up with a solution to this problem please let me know.
I'm all ears!!!

Nokia E73- Call log does not display entries

I recently purchased a E73 by itself.
For some reason the call log does not display any telephone numbers or activity in recent calls; missed calls, received calls, dialed numbers. It would show that I have a missed call but when I enter it, it says (no missed calls).
Any ideas? Please let me know...
Thanks

Enable and set log duration to 30days.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

PS CC does not display images

I use (hope to) PS CC in combo with LR and Windows 8. When I select right click in LR and edit in PS CC, PS loads but does not display the image. If I look in PS under recently opened files, the file imported from LR shows. If I initiate the opening of the file from PS, it does not display. If I initiate the opening of any image file from CC, it does not display. What is the problem and how do I work around it??? Thank you.

Update your video card driver from the GPU maker's website. If you can't update the driver for some reason, then turn off the GPU features in Photoshop's preferences until you can get a working version of your video card driver.

Adobe Robohelp 8 TOC pod does not display

I recently got a windows 7 machine and moved robohelp 8 to it. at first it didnt work but the a couple of patches were applied and now i can at least open my projects. problem is the TOC pod does not display at all. It does not show up in the pod list so I cant select it (obviously) any help greatly appreciated.my version is 8.0.2.208
thanks

Hi,
You can open the TOC from the Project Manager pod. Open that one and open the TOC you want to use.
Greet,
Willam

Firefox does not display item description while in EBAY.

In Firefox I log on to EBAY. Any item that I call up does not display the description nor did IE 8. I upgraded IE 8 to IE 9 and EBAY now works in IE 9.I have set off the forged wed site message. I have installed latest Firefox, Realplayer and Flash player. I am running Kaspersky firewall, and several malware scan and registry fixers.
The operating system is a current Windows 7.
Ebay says it is not their problem yet the symptoms occurred when they changed how they display the description for an item.
Need help.
Thanks
Mike

Hi,
You can try to '''Clear Now''' the '''Cache''', '''Cookies''', and '''Site Preferences''' in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
For optimal firewall/AV/other security software configuration, please see [https://support.mozilla.org/en-US/kb/Firewalls this]. Ideally Firefox and its processes/related files should have full trust in all the modules/configuration areas of the security software - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures).
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
You may also have to restart the PC before the new rules sink in completely.
If problems persist, you may also want to Reset Firefox and start afresh.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Settings Manager box does not display

I recently uninstalled flash player and installed the latest version. Although flash player works fine, the Settings Manager box does not display. I only have this problem on Firefox 3.6.10, it works fine on IE 8. I am running Windows XP 32 bit.
Flash10k.ocx 10.1.85.3
NPSWF32.dll 10.1.85.3
I have tried uninstalling, rebooting, reinstalling. I have also tried disabling AV and firewall.
Although I cannot see the SM box, I can right click on the white space to access the local settings. Turning off hardware accelleration did not help.
I have also checked for updated display drivers, none available.

I can't really help, just want you to know you're not the only one with this problem. Just saw another thread with the same.. and well.. got the problem here as well.

My BT does not display my "Recent Usage"

Similar Messages

Maybe you are looking for