My built-in audio input clicks

i've been recording for several months now using the built in audio input (NOT the internal mic) and just ten minutes ago none of my signals are going thru and i just get constant "dapdapdapdapdapdap" type clicking sounds, and they're clipping like mad. also the clicking speeds up and slows down depending on the input volume level. have i accidently blown out my input?

hey im having the same problem, did you ever come across any help?
thanks
Henry

Similar Messages

  • Utility to switch between Bluetooth headset and built-in audio input/output

    I'm looking for a utility that will switch the Sound preference settings between my Mac's built-in audio input/output device and my Bluetooth headset for use with applications such as Skype.
    The way I envision it working is that I would click an icon at the top of the screen and it would toggle the Sound preferences settings from
    Output = Line Out (or Digital Out)
    Input = Line In (or Digital In)
    to
    Output = (my Bluetooth headset)
    Input = (my Bluetooth headset)
    or vice-versa.
    That's it. It doesn't need to automatically detect my headset as I might be using the headset on another device. Just a button that would toggle between the built-in and Bluetooth device settings.
    Has anyone seen anything like this?

    Thanks, it works great.
    It would be even better if one could define device groups. e.g. Headset, built-in devices, etc. I'll drop a note to the developer.

  • How do I use the built-in audio input with AU Lab?

    I just tried AU Lab for the first time, and I can't select an audio input.
    The "Create New Document" window lets me choose "Built-in Output", but the pulldown for Input Source is greyed out. The area under the "Input" button says, "Audio Input Not Supported". How can it not support the built-in audio input? I even tried using SoundFlower to route the signal from the Line In (a small app) to the Input of AU Lab. AU Lab's display then shows two channels from Soundflower, but they are still greyed out.
    All I want to do is get a signal from the built-in audio input routed to AU Lab so I can use AU effects to process the audio signal in real time. How do I do this?

    They comes configured with your software. If you want to use, for example, Skype, you need to run the configuration wizard section.
    Best regards.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • Built-in audio inputs and output don't respond to anything.

    Hi there,
    Maybe somebody can help me, I have a macbook pro os x 10.8, and i'm having a bit of problem.
    I connected a cable to the line input, and before i had a chance to balance the high volume the whole software in the system preference froze, and now the built-in audio inputs and output don't respond to anything, also in the audio MIDI setup menu. The volume button moves extremely slow, and there is no sound at all. Anybody has any idea?
    Thanks in advance

    Apple store genius bar seems like you best bet.
    Ciao.

  • No built-in audio input on TiBook. What to use?

    Hello,
    My PowerBook 667 has no built-in audio input. How should I get audio in (for digitizing vinyl records for example)?
    It has USB, FireWire, PC Cardslot.
    Thanks,
    Andrew

    Creative Soundblaster MP3+ (USB) costs around $30
    and
    works in OS X. And has RCA inputs, for a record
    player. No drivers or software needed.
    That sounds and looks excellent. But they don't make
    it anymore. The replacement is $50 and is Windows
    only (per their website). Actually, the requirements
    for the MP3+ say Windows only also.
    That iMic thing is fairly overpriced crap, as far
    as
    a sound card.
    I thinks it's only $35, but I would like something
    that is good quality in the <$80 range. I guess I'll
    look around. Thanks</div>
    I know the website says Windows only, but it works in OS X (and Linux) with no drivers needed.
    Check out http://www.m-audio.com or http://www.sweetwater.com

  • Horrible Line Noise w/ Built in Audio Input After Update!

    Something happened after the most recent LE8 update, I now have terrible line level hiss/noises when using the built-in input on my MacBook Pro. No trouble with my Firewire audio input though. The noise is really bad and records to track, making me believe that this is an input issue. I'm not positive that it's from the update but I've never had this problem before. It happens with both Logic Express and Garageband, rendering the audio input useless. Anyone else having this problem?

    Thanks for the response guys. It seems we're in the same boat.
    The problem is intermittent on my machine . It has occurred three times since I bought it. The fist time it lasted for a day and a half. I rang Apple support and went through a number of steps until the P-RAM suggestion which seemed to fix it. A few days later it disappeared again and resetting the P-RAM had no effect. My wife continued to use the computer (without sound) and some hours later it came back after a restart (she only restarted it because she is in the habit of shutting down instead of using sleep). The problem occurred again. That time I restarted the machine a number of times, with and without the external speakers plugged in, with them turned on and off etc. This had no effect. I gave up. Some time later my wife went to use the computer and it came back. I now believe that the P-RAM solution that seemed to fix the problem the first time was just a coincidence.
    I rang Apple support again and they gave me the following steps (A,B & C of which I went through the first time the problem occurred):
    A: Log in through another account and see if it had the same problem.
    - The built-in audio was still missing.
    B: Run the disk utility on the hard drive (after booting from installation DVD).
    - There were nil problems on the HD, but it did not fix the problem.
    C: Reset the P-RAM.
    - This worked the first time though it has not worked on subsequent re-occurrences of the problem.
    D: Do an Archive Reinstall.
    - I did this today; though the built-in audio was working, I just wanted to complete the suggestions the Apple support person gave me. The problem has not reoccurred yet, but it has only been a few hours. I will be using the computer as much as possible tonight to see if the problem reoccurs.
    If the problem reoccurs I'll be taking the machine in for warranty repairs, or better still replacement.

  • Is there a reason why no one uses the built in audio inputs on the Mac?

    I'm curious.... I've heard various things - but the sound did seem okay to me when I recorded straight into the Mac's input in the past. So... what is the problem with the Mac's inputs and outputs and why does everyone buy a sound card/device instead?

    It seems rather odd that Mac fans generally take pride in owning high quality (expensive) machines but are happy ignore poor audio inputs and outputs.
    It has nothing to do w/ taking pride in owning high quality machines - you don't buy the Mac because it has great Analog/Digital conversion (it doesn't). You buy a mac because of its stability, its out of the box compatibility with the two most proficient, professional DAWs out there (Pro Tools and Logic), its easy integration with most hardware, the way it handles audio processing. . . the list goes on and on and on. I don't really have the time to go into the intricacies of high quality audio processing, but NO COMPUTER has it. If a computer did come built in with Apogee master clocking, A/D/D/A conversion, and high quality analog mic preamps, you might be looking at your normal computer plus about $15,000 (at least.) Your machine is there for stabile, consistent, day to day recording and audio processing (whether it be editing, mixing, mastering or all three), and you purchase external audio interfaces for the dedicated function that they are made for.
    With audio interfaces comes expandability and flexibility that NO system has right out of the box.

  • Audio input clicks when input connected

    when i plug in any input source into the audio input on my macbook. all it does is click.
    did i fry something?

    Did you look at System Preferences, Sound, Input, and check the input volume level?

  • No "Built In Audio Input" ?

         Very odd.
    I have installed Leopard on a G4. . A completely clean install.
    Once done, I open the sound pref pane. . In the "input" tab there is nothing . . no built in mic or line in . .
    Any idea's any one ?
    There is a Hammerfall 9652 card installed, but I've not put the drivers yet.
    Help appreciated. .

    I went through all that yesterday . .
    I had installed the drivers before even looking at the audio I/O, the 9652 was the only available input. . . So I did a complete OS re install. . .
    I didn't how ever try a PRAM reset or an SMC reset. .
    I think that'll be my next action, but not until Monday. . .
    I'll post the result. .
    Cheers . .

  • No Built-In Audio, USB fine

    The built-in audio input and output lost. The USB iMic output and input audio works. Can't find what's wrong with the built-in.
    Milan

    Since I don't have chime I don't know exactly when to push PRAM and how long to hold it.
    I have no idea if a PRAM reset will help, but trying it shouldn't hurt anything. In my experience, most PowerBooks take from 60-90 seconds to start up. It's been awhile since I did a PRAM reset, but I think it takes a bit longer than that. Once the first chime sounds, the second one comes in rather short order. Thus, I think if you shut down, push the power button to start up, immediately hold down the Apple-Option-P-R keys, and wait three minutes, you should have a pretty good shot at achieving the reset.
    You could also do an NVRAM reset while booted into Open Firmware per this KB doc:
    http://docs.info.apple.com/article.html?artnum=42642

  • Can I set the audio INPUT to my pre-amp, and audio OUTPUT to the built in?

    I am using Logic Express 7. I want to set the audio input to my Firefox pre-amp, but set the audio output to my computer's built in speakers. I want to essentially record into the pre-amp and listen to the playback through my speakers. I can easily do this in GarageBand, but haven't found a way in Logic.

    The remaining problem I'm having is when I record into an "Audio" track via my microphone which is plugged into the Firebox, I'm still only hearing the playback from the Firefox headphone jack, not the computer's built in speakers.
    Did you select your new aggregate device in Logic's audio preferences? If so, then the problem is probably with your settings in the control panel which controls the Firebox - I don't use it, so I don't know what it's called, but it controls the routing and monitoring for the Firebox. Check the Firbox manual - there are probably two settings, one for playback and one for direct monitoring when tracking.

  • Macbook Air Mid 2013 No Built-In Audio

    Hey everyone,
    I have an issue with my friends Macbook Air (Mid 2013 Model). After listening to some music through his speakers, he unplugged his Aux cable and then plugged them back in to find that he didnt have built in output or input anymore. I have tried all of the following to fix it:
    Reinstall OS X 10.8
    Run all of the Automation tools found in the application Onyx
    Reinstall certain .kext files (AppleHDA and AudioAUUC)
    Repair permissions
    Re-seat the speakers in the device itself
    Reset coreaudio
    Resetting SMC, PRAM, and NVRAM
    Clear and re-build kernal cache
    Cleaned the headphone jack
    Plugged in an audio interface
    Reloaded from Time Machine Backup
    etc...
    I've literally tried almost everything in the book. The only other thing i can think of is installing a copy of Mavericks when it comes out (In October i believe). There is no boot up chime, and after running the OS in verbose mode, i can see that AudioAUUC.kext is not being loaded. Built in audio does not appear is system profiler. What can i do to fix this problem? Could it really be a hardware issue? If so, what can i do to fix it?

    Test after each step.
    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
        Option click the speaker icon, if present and select Internal Speakers.
    2.  Plug in the head phone and reset SMC.

  • How can I use a different driver for audio input and output?

    I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
    What I am trying to do is:
    1) Record into Logic Express using my Tascam US-122.
    2) Have playback come out of my computer sound system, not the Tascam.
    If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
    So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
    -allen

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

  • Missing audio input devices

    I have 5 mac pro systems. All running the same OS and software versions. All using the AJA Io HD as the primary A/V capture device. 1 of the mac pros can select the Aja IO HD as the audio input in Soundtrack...on the other 4 the option is missing. But if you click configure device, the Aja is there..youjust can't assign it..I a able to use the Aja as an audio input in Quicktime on all machines as well as FCP, Audacity, etc..so I can't see how it would be a driver issue and I have used the exact same configuration in the aja control panel..any ideas?

    Well, I'm still on the same machine I once installed Leopard (10.5) on, and I've upgraded to Snow Leopard to Lion and now to Mountain Lion, the only thing I always had to replace after installation was the AppleHDA.kext (in System>Library>Extensions). The version I have is 1.8.4fc3. But there's no guarantee that that'll work for you, chances are you have different hardware.
    If you use an audio interface with drivers, you won't need the .kext - but you don't get the built in inputs (which are crap anyway, compared to an external (24 bits) audio interface).

  • Multiple Audio Inputs

    I have two USB microphones which I use for home studio recording. I want to have two different 'Real Instrument' tracks, recording from each different microphone (one track recording from one mic, and the other track from the other mic), but in the GarageBand preferences I have to choose just one audio input. I would like to know how I can have two inputs to work simultaneously, and if I can also record with the two mics at the same time?

    thanks for trying. i tried repairing the permissions but i cant open Disk Utility (parental controls - im 13), but somehow (im no expert) i doubt it would do much difference.
    if it makes any difference ill be a bit more detailed. i only have four 'devices' listed: 'built-in input', 'built-in output', 'logitech usb microphone', and 'generic usb audio device'. when i click the plus button, the aggregate device bar appears below these four for a second, then disappears. i can see it says'0 in / 0 out' underneath (but i dont know what that means). i dont know if this info is any use. thank you for your help
    Message was edited by: Ella Parkinson
    Message was edited by: Ella Parkinson

Maybe you are looking for