MY BUILT IN CAMERA DOESN'T WORK

my built in camera doesn't work, any advise?

Need a lot more information.  What Mac do you have?  What OS X?  What program?
By the way, its is called the Facetime HD camera, which should help you search the forums for an answer to your question.

Similar Messages

  • New 24" imac 2.8ghz built-in camera doesn't work

    the built-in camera doesn't show up in ichat or photo booth. "there is no camera attached to this computer" error in ichat...
    plugging in an external iSight does work.
    i've repaired permissions, rebooted, run fsck,
    tried to run the 10.4.10 combo intel updater but the one available online won't let you install it on this system. it comes with 10.4.10 installed.
    powered down and unplugged everything for 30 seconds, the plugged everything back in and rebooted.
    i've reinstalled the os from the included dvds... "archive and install"
    all software updates are installed, including "iMac Software Update 1.0"
    any other ideas other than send it back?

    i might have a little help for you people. I just had this same problem, and i was very frustrated about it. here is how i fixed it.
    Have you been messing with Quicktime in the last few days/hours? you probably deleted a file that you needed. i found a place tha told me how to put it back, as well as had a download of the file in question. here is the link address --
    http://techslaves.org/index.php?page=17
    hope it works for you too!

  • The built-in camera doesn't work since upgrade to osx mountain lion

    macbook air late 2010

    I have the same issue. I did a clean install of ML and my camera is not recognized on any application. I have a Macbook Late 2008. Any help will be appreciated. Thanks!

  • Built-in cam doesn't work on my Macbook Pro. What I need to do?

    any help?

    Hi there hectoracho,
    You may find the troubleshooting steps in the article below helpful.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    -Griff W. 

  • Camera doesn't work suddenly half way on FaceTime

    While on Facetime, the camera suddenly stop functioning. No green light.
    The camera doesn't work on photobooth as well.
    Already installed the latest OS which is 10.9
    Any suggestion? or it is a hardware problem need repaired?

    P. Yu wrote:
    No, it doesn't help.
    Said not connected to camera.
    If the other suggestions in http://support.apple.com/kb/HT2090 do not remedy your problem, contact Apple or an Apple-Authorized Service Provider for service.
    ((Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.))
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • After installing OSX Lion, the built-in camera no longer works.  Solution?

    After installing OS X Lion on a late 2010 MacBookPro, the built-in camera no longer works.  Worked beautifully with Snow Leopard.  Reset SMU to no avail.  Any solutions?

    Hi, Thanks for the reply, I really appreciate your help with this.
    Yes to both questions: iMovie is in the Applications folder, not in any subfolders. And I have reinstalled iMove from the original disc (before and after the OS reinstall) but can only get up to 7.1.4 without buying a later edition of iLife.
    The camera definitely worked under Snow Leopard but not since I upgraded from SL to Mountain Lion.
    Found the following on this forum:
    If you have iLife '09 or older, there have been no iPhoto 8, iMovie 8 or
    Garageband 5 (or older) updates relating to Lion or Mountain Lion. The
    support and compatibility situations for those versions is unknown as
    Apple hasn't said anything. We can only determine compatibility
    anecdotally. If it turns out that there is a problem and Apple doesn't
    release an update, your only recourse is to buy the latest version of
    the application.
    I reinstalled some other iLife apps as well. iDVD went missing after the ML reinstall. When I reinstalled it from the original disc, it wouldn't open and I had to download a manual update to get it working. iWeb previously stopped working after the upgrade to ML (all the menu options were greyed out) but when I reistalled it (together with iMove and iDVD) yesterday, it started working again.
    All this seems to point to a compatibilty issue between iLife '08 and ML.

  • Canon mini Disk camera doesn't work if external drive connected

    A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM,  4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
    I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago.  Both "live" video and from the recorded mini cassette tape.  Then all of a sudden not one of the software recognized my camera anymore.  I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black.  No, I checked if I left the cover on.  I checked my Sony WX-5 digital camera and see if that is recognized.  Yes, both pics and AVCHD videos are seen using the USB connection. 
    The problem started like this.
    I was downloading a file.  Had to work for an hour and when I came back upstairs.  I noticed that the screen was frozen.   So, I shut the Mac down.  And when I started it again, well nothing happened except for a grey screen.  A half~sized cursor was stuck up in the top left.  But, my mouse also had a cursor which was movable.  
    It wouldn't even recognize the OSX Install Disk holding down "C" or "Option".  Only starting with "Shift" held down, "Safe Boot"  could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express  they still couldn't recognize my camera.  I had been using the Canon FV M10 camera for a few years with both external hard drives on.  There were never any problems until just before I sent it into the shop.
    There was only one way to use my camera.  Un-Plug the external HD6.  Then the camera functions fine.  but remember I had been using this camera with both HD's for around two years without any problems.
    Notes on symptoms:  and what actions I took.  
    Front connections: FW400 Canon camera.  FW800 (Tried connecting HD6)  
    Rear Connections: USB2 1) MidiMan 2 x2   2) mouse  3) Canon Printer
                                   FW400 HD5  FW800 (tried HD6)
    With HD6 Connected.
    iMovie 11 9.02 : Start iMovie  O.K.  No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie. 
    2nd start:  Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
    iMovie shows (not responding)  When I turn off the camera.  (not responding) disappears and iMovie is working again.  But, "No Camera Connected" shows again.  Quit!
    Un-Plugged (Ejected) HD6.
    When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.  
    "No Camera Connected"  I Quit iMovie.
    Re-start iMovie:  Camera on… Live video and record miniDV tape can both be seen. 
    Skype:  Both live video and mini DV tape recording even plays back over Skype screen.
    iChat (same as Skype) O.K.
    Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00  (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
    The call to Apple Tokyo today.  
    Just talked to Apple (Mac) Tokyo about my computer problem.  Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and  here is the basic problem.
    I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few  years  (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives.  And Apple said that it's a 3-party problem.  (different makers etc.)  But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac)  to the board. 
    When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in  Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6  all of them work fine.  The camera "live" or the camera playing back the mini DV tape video.
    Wouldn't this be a problem between the connections (front & back) to the new video board?  Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help!  thanks

    +My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
    You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
    But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Camera doesn't work in FaceTime

    When Face-timing, my camera doesn't work (I have no image of myself). The box is there, but it is always black (i.e., the person I am face-timing can't see me).
    The camera works fine outside of FaceTime.
    I just reset the IPod touch and now the camera on the opposite side of the screen works, but not the screen side. Also, the Non Screen side camera tends to freeze.
    Thoughts?
    IPod Touch iOS 8.1.2
    Thanks for any help.
    M

    I do not know what you mean by reset. Try the following if you have not done so already:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

    Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

    How to Troubleshoot iSight - Apple Support

  • Nokia Lumia 800 camera doesn't work..

    Hi everyone.. I have problem.. I buyed NOKIA lumia 800, but camera doesn't work.. When I turn on camera i have black screen, and when i press camera button, she just turn off.. Please help.. i tried hard reset, diagnostic tool, but she doesn't work.

    Since the hard reset does not help and you have just only bought the phone, I suggest returning it to the seller for a replacement or refund. 

  • Satellite M645-S4050: built in camera does not work correctly

    My built in camera does not work correctly.
    It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
    Also some videos I load up on youtube look like this.
    I have been researching for an answer but can't find it, please help me.

    All you can do is to test it with latest webcam driver.
    Remove preinstalled camera software and install latest version offered on Toshiba download page.
    If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
    In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

  • My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Camera doesn't work ! 3 hours old Blackberry Z10

    I just bought my Z10 ! tried to use my camera and it doesnt work ! the screen turns to black and nothing is blocking my camera  ! WTH
    I JUST BOUGHT THIS THING ! Blackberry I hope you aren't wasting my money

    Akrumeta wrote:
    Now I bought the Z10 to find that the camera doesn't work !? nothing is blocking my camera and when I press the Camera button the screen turns to black and nothing happens !
    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1338 built in camera has stopped working, how can I update or reinstall the drivers

    Built in camera has stopped working, how can I reinstall the respective drivers?

    Here are my best suggestions for your camera problem, Stephen:
    •  If you have not already done so, shut down Mac, restart,
        and try again.  If the camera still does not work, continue.
    • Try ALL relevant suggestions from Apple's Troubleshooting
       article: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       If you need to use the "reset" suggestion, use the correct reset for your Mac.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update.  For your Mac OS,
       the current version is at http://support.apple.com/kb/DL1640
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
    • If nothing else resolves your problem, yours is likely a hardware issue.
       Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

Maybe you are looking for