My built in isight isn't working with imovie!!

hello,
i have the black macbook, and i was trying to use the built-in isight on imovie although it does allow me to do so, in fact it's not even found, when i search for the option, please reply with help it will be greatly appreciated

When you open a new project in iMovie, and click on the little camera ikon, you should get a drop-down menu of the options open to you.
iSight is one of them.

Similar Messages

Built-in iSight will not work with Skype

I have a new Macbook Pro that I purchased about a month ago, running OS
X 10.5.8.
I've been using Skype to video chat, and at first everything was working
very well. In the middle of a chat, however, the video stopped working
altogether.
If I go to the video tab in Skype preferences, the camera will then turn
on and I can see myself, but once I go back to the call, the camera
won't turn on (the green light on my camera stays off too). In video
preferences I have the following options checked: Enable Skype Video,
Automatically receive video from: People in my Contact list, and Show
that I have video to: People in my contact list. I have also tried to
enable the "Start my video automatically" option but to no avail. The
video camera it is set to use is the Built-in iSight.
I have tried reinstalling skype, including deleting all the preference
files on the computer, but that did not help.
The video works fine in other applications such as Photobooth, iMovie and Google Chat. I have browsed through the many Skype forum posts about similar issues, as well as Apple forums and have tried every fix that people have suggested including resetting my SMC, updating all my applications, trying Skype under different user accounts, reinstalling Quicktime, reinstalling Skype (as outlined in the Uninstall guide for mac), repairing permissions, etc.
I am pretty sure that this problem began directly after I switched to
SCREEN SHARING during a video chat. When I switched back to Video, it
did not work.
No other applications that use my camera are running.
I am assuming that since it originally worked with Skype, and since I had not touched ANY of the options in Skype and have done nothing other than try screen sharing, and since I did a complete Skype reinstall includeing preferences, that the problem should NOT be with the Skype program itself, but rather something that was modified in the operating system configuration during screen sharing.
The only other thing I can think of trying is to reinstall iSight, although I haven't been able to figure out how to do that, or to reinstall my entire operating system, which I don't see as an acceptable solution.
I am using Skype Version 2.8.0.659
Any help getting this fixed would be greatly appreciated.
I have posted a similar topic in the Skype forums along with a screen shot of my Skype preferences window: http://forum.skype.com/index.php?showtopic=422861
From my online reading in both the Apple and Skype forums, it seems as though this is a relatively common problem. If I can find a solution from either Skype or Apple, I will post the solution in both of the forums.
Update: I just upgraded my OS to 10.6.1 and my camera started working again. Then, I was in a chat and I lost my internet connection. As soon as I got back online I restarted the conversation and the camera doesn't work again. This is getting to be ridiculous.
Thank you for your time,
rystheguy

Hi,
It is years since I tried Skype. (Probably in Tiger)
I use Little Snitch, a utility that can report the ports and IPS any App is trying to contact.
For Video chats it seems the Skype process spreads the load across many "Servers" wanting to connect to about 3 doz (I got fed up with clicking the accept Button)
For this reason I do not think it is very secure.
I only today read a post that said Skype had Screen Sharing.
iChat 5 makes it clear (well if you run /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7 In Terminal) that there is a "camera" setting for the Desktop which may be a forthcoming thing or is about produce the Screen Sharing pic. (i.e iChat lists two "cameras" in the log produced by the above Terminal command).
iChat 4 and 5 use the Apple Remote Desktop engine to do Screen Share as does the Screen Sharing App invoked from the Finders Go Menu > Go to Server and using VNC:// as the Link type.
I would have no idea what protocol Skype are using.
They created their own Video protocols and similar with SIP (Session Initiation Protocol) for Connecting to POTS (Plain Old Telephone Systems) Phones in disregard for Internationally agreed Standards.
I doubt that it makes use of the ARD engine. It will probably be a reinvention of the wheel again.
I took a look around the Skype web site but could not find any mention of how they are doing Screen Sharing.
I would guess it is similar to the iUSBCam method of Desktop as Video Feed.
Do the Console or System Log in Console (Applications/Utilities) have any messages about this ?
9:59 PM Monday; September 21, 2009

Built in isight camera not working with flash

My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

zeppelinfan1234 wrote:
I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
For your symptoms with this system, I suggest you do the following:
(1) Apply the 10.5.8 Combo Update using the following process:
• Backup your Mac and turn off Time Machine
• Disconnect peripherals and restart Mac
• Use Disk Utility to repair permissions
• Download and install
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
• Repair permissions again immediately following the restart that finishes the update.
• Test whether Flash works for you now.
(• Turn Time Machine on later when you are satisfied that the update worked.)
(2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
http://get.adobe.com/flashplayer/otherversions/
Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Built in iSight won't communicate with iMovie

I can't get iMovie to communicate with the built in iSight camera on my Mac Book Pro. The only option showing when clicking on the camera icon is time lapse. Any suggestions?
How do you capture video through QuickTime Pro?

... iMovie ... with the built in iSight camera on my Mac Book Pro ... Any suggestions?
Using iSight with iMovie
How do you capture video through QuickTime Pro?
QuickTime Player 7.0 Help: Recording Audio and VIdeo

Built-in webcam isn't working.

I have HP 2000 Notebook PC with Windows 8. Built-in webcam isn't working. it's not detected by apps e.g. Cyberlink Youcam . even there isn't Imaging Devices in Device Manager.

It is an issue with the hardware. Mine came like that and they want me to ship it to them to be fixed for God knows how long. I'll just go buy an external webcam and next month when I have to replace my pc's at work I will shop for anything OTHER than HP. Not nice to sell crap to a person that works for an ISP and can warn her customers of the crap you sell.

How to I get the built-in iSight camera to work?

My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

Hi there,
You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Hope that helps,
Griff W.

FaceTime camera isn't working with yosemite 10.10

Today i update My MacBook Pro 13'' (2013) ! FaceTime camera isn't working with yosemite 10.10 !
Anyone Can help me?PLEASE!!!!!!
When i log in , it get me a message ,FaceTime Want use my Key , and than SHOW me Want use my Key( ***** ) Yes or No ?
no matter i Choice any answer , THE FaceTime WII all log on.......,and Show me other message , Please Call Apple , And give me a service code : ******.
<edited by host>

Just got this problem fixed.
This is what customer support instructed me to do for my iMac:
Rest 1.
Shut down computer and unplug power; wait 15 secs.
Turn on computer.
Shut down computer.
Reset 2.
Turn on computer.
Before gray screen comes up, so almost immediately, press Option-Command-P-R at the same time.
Hold down until you hear the turn-on noise, let go and let the system start up.
This fixed my camera problem.

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

You don't need a serial number for the latest version of Photoshop, just sign in with your Adobe ID

I upgraded my iphone to ios 6 but now it isn't working with itunes

I upgraded my iphone to ios 6 but now it isn't working with itunes and my itunes will not upgrade. It is stuck at 10.6.1 and my macbook is not compatible with 10.7

A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

HD camcorders that will work with imovie.

I am considering replacing my old Sony mini DV SD camcorder with a mid quality HD one. I read that there are problems with most of them on the apple website. Does anyone know which memorycard camcorder will work with imovie or do I have to go with an old HD DVtape one? It will be used mainly to video show jumping indoors. There are good discontinued Sony ones still available but I would prefer newer technology and it needs to be reasonably compact and light, but a step up from entry level.

Diveactive:
This is a user to user forum. Think of it as asking for help from a neighbor. They will generally help if they can. You can ask your neighbor to borrow a cup of sugar. But don't get mad at your neighbor if they don't have any sugar.
The etiquette here is that generally people do not clutter up a thread with "I don't know" answers. The fact that I don't know doesn't mean that there isn't an answer, and when someone posts that answer, it makes it difficult to find if a bunch of people are chiming in with "I don't know."
If you have a problem that no one knows the answer to, usually the best thing is to contact Apple directly. There is a "Contact Us" link at the bottom right of this page. I don't know what support infrastructure Apple may have in your country, but you can find it at the contact us link.
Good luck.

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

I'm on OX X and am trying to work with iMovie 09. It keeps crashing every time i open iMovie. Any suggestions?

I'm on OX X - version 10.9 and trying to work with iMovie 09 and it keeps crashing...any suggestions?

As a first step, you may want to try deleting iMovie preferences.
AppleMan1958 outlines the steps in his excellent User Tip here:
https://discussions.apple.com/docs/DOC-4061
Matt

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

Full HD camcorders that works with iMovie 11

Is there a list of Full HD camcorders that works with iMovie 11 directly - plug & play (import, edit,...), without need to use any workarounds ...
No compromise as to the quality of video.
I am about to buy a new camcorder and am bit confused reading practical/real life user experience presented on the Internet ...
Thanks, Ivan

Here is the list.
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie will not import 60P video without a lot of tinkering, nor will TV sets play 60P video. So that is a feature that helps sell cameras but is not currently a must have. If you shoot a lot of slow motion, 60P can be very useful.
Make sure the camera you buy will shoot 30P, 25P, 24P or 60i.

My built in isight isn't working with imovie!!

Similar Messages

Maybe you are looking for