My built in keyboard is not working properly on my iPhone4S

My keyboard is not working.  When I type it presses multiple letters and periods and spacing.  It is like the sensitivity of the keyboard has increased 100% but for no reason.  Please help.

iPhone: Troubleshooting touchscreen response

Similar Messages

  • I had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    Hey ynareshbabu,
    Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    You may want to refer to the "Some keys don't work as expected" section.
    Thanks,
    Matt M.

  • Ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    Hi, JoJoEvs.
    Thank you for visiting Apple Support Communities. 
    Here is an article that you may find helpful when experiencing this issue.  After all steps related to your sound issue have been processed, see the section labeled Issue not resolved. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Jason H

  • Keyboard issue I have a iMac thats about 4 years old, and now the keyboard is not working properly. some keys do not work. Any suggestions ?

    I think I may have a virus! My keyboard is not working properly. When I press the zero key, it doesn't appear. Other keys that do not work include the directional keys, delete key, and others. I tried everything that I can think of to fix it, but nothing sesems to be working. Should I bring the keyboard and=/or the entire computer into my local Apple store+? see, the +? appears before the question mark, and I didn't put it there! Thanks!

    No need to take the computer at this stage.   Just take the keyboard into your local Apple store for examination.   If you have another machine, not necessarily Apple, you could try the board on that or perhaps a friend's machine … they are largely universal.
    You do not have a virus.

  • My keyboard does not work properly when texting etc

    Hi All
    My keyboard does not work properly on my Iphone 4 when texting, it brings the wrong letter or wont let me choose the one i want.  Anything i can do to correct this or is it a visit to apple?
    Cheers for any support in advance.

    I have rebooted and synchronised it with the mac.  I dont even have to touch the screen now and some letters get picked up.

  • My keyboard is not working properly. To get an a i have to type a q

    my keyboard is not working properly. To get an a i have to type a q. To get a w I must type a z. M is the semicolon. Period is less than sign. I have turned off the computer and unplugged the keyboard and it still does not work. Running OS 10.6.8  Just noticed I have to use caps to get numbers.

    Somehow I had gotten my keyboard preference changed to French.
    If you have more than one keyboard layout enabled (checkmarked in the Input Sources section of the Language & Text control pane in System Preferences), then pressing Command-Spacebar or Command-Option-Spacebar will switch the active layout from one to the next.
    You can prevent that from happening by either -
    • Reducing the number of enabled keyboard layouts to one; or
    • Turn off those two keyboard shortcuts. You can do that in Syatem Preferences > Keyboard > Keyboard Shortcuts; click the Keyboard & Text Input in the left pane, then uncheck the two "select" items in the right pane.

  • Keyboard backlight not working properly

    Hi, first of all, thank you for your replies and sorry for the bad grammar (english not my first language).
    Background info:
    I have a 17inch macbook pro 3.1
    Core 2 duo 2.4
    Im running Osx 10.7.2
    Upgraded HD and memory.
    Issue
    I had this computer since 07, no problems until about a week.
    keyboard back light doens't work properly, I have tried resetting SMC and using an app called LabTick.
    ONLY if I press slightly (without actually pressing completly) the keys "F" or "G" the backlight works.
    when it does it responds to the F8-F10 keys and goes off on light rooms.
    Its pretty annoying, it can be working for hours then it stop working and I have to play with f and g keys to get it working again for a long period of time.
    is this a common issue?, is there a quick fix, I really dont wanna pay about $800 to change the whole logic board.
    Thank you

    Piwy wrote:
    emmm... anyone had this issue?
    No and  don't think you will.
    I think you have a problem with your computer. Maybe a clean install of the OS might fix it, maybe not.
    If not then there is something wrong internally which can not be fixed without figuring out what internal part is causing it.
    That can't be done on this forum.

  • My MSI 955X built in networking is not working properly

    Hi,
    I have many MSI 955X motherboards with the built in Intel Pro1000 and the broadcom 1 GB lan built on board. I have been having trouble
    getting these built in lan ports to work. I have updated the mobos bios to the latest. I have installed the latest lan drivers and still they act up.
    The network ports seem to take a very long time to copy files from our server etc. a 5 MB file just sits there and says calculating time to copy file then starts copying very slowly. When I don't use the built in lan ports and instead use a pci 10/100 network card I copy fine.
    But as soon as I use the built in network ports I get irrattic speed and behavior. It's almost like it can't auto select the speed properly and gets a lot of errors. But when I tell the ports to connect at 100 full instead of autoselect. It doesn't fix the problem. Has anyone else had this problem before. I have noticed it with not just this mobo but with others as well. It appears that the 1 GB technology isn't very compatible with the existing network. It's really very odd as in I've had other 1 GB network cards to work for a long time. Then sometime in the future they don't connect properly. Without changing any of the switches etc.. They just start working irratically. When I replace them with a 10/100 card they work like a champ.
    I never had much luck with intel network cards I think they are too complicated and have too many options.
    Any help at this point would be much appreciated.

    1. Please check whether the cable you are using is right, especially the max speed which the cable supports;
    2. Please check like this way: click start/run, then type cmd, after you enter DOS circumstances please type ipconfig/all. Then you may see whether the mac adress is right or not;
    3. Please enter you network card property to select the connection type to have a try.

  • Ergonomic keyboard 4000 not working properly

    Hi all,
    I have a very weird problem with my MS Ergonomic 4000 keyboard (USB) connected to my MacBook Pro (OS X 10.7.5). I've connected it in the past and it worked just fine but now, it's not functioning properly. I'm typing this on the MacBook keyboard, but here's what happens when I type the letter i using the ergonomic keyboard: i9
    This is just from one tap of the letter i. It only happens with the lower-case i, and not with when typing a capital I (shift+i) This happens with other keys as well.
    I searched the forums and support sites and so have since both removed intellitype and then installed intellitype 8.2 for the proper OS, but still no change.
    Any help / advice will be greatly appreciated!
    Thanks!

    Thanks Esquared,
    I have the same problem in safe mode. I just tried it on my iMac and it does the same thing there. Also, when I press Shift + any key, a dialog pops up asking me to assign a function to a number key that I didn't press. The numlock key types "4" as well.
    So I'm guessing that the issue is with the keyboard itself. The question is, can anything be done? It's relatively new and I'd hate to have to just throw it out.
    Thanks in advance.

  • Keyboard will not work properly

    Only some keys function properly. No alphabet keys works and only 5 number keys. Mute works, volume does not. Scroll arrows do not work, but caps lock does, and so on. Late 2008 MBPro

    Sounds like you have a bad keyboard or keyboard cable or a bad connection between that cable and the logic board. It does not sound as though your problem could be software-based.
    If you have access to an external USB keyboard you could plug in and test with, that should tell the tale. If it works OK, you have a hardware problem.

  • Please help - keyboard backlight not working properly

    The keyboard backlighting on my 15in early 2008 macbook pro stopped working properly about two weeks ago. I opened it at night to find that only the middle keys were lighting up. No spills, no drops or anything out of the ordinary. I have already reset the SMC (via sleep/restart/shutdown and shift/control/option/power), but no luck. Currently the only keys being lit are: 6 7 8 T Y U G H J B N. If anyone knows of a fix for this or anything else I should try, please help. Thanks.

    You should take your MacBook Pro to Apple for repair. 

  • My keyboard is not working properly.

    I bought a brand new wireless keyboard and I thought it would connect with no problem but unfortunately most of the keys are not working correctly. I tried to fix it in the keyboard shortcuts but some of the features are not available in the keyboard shortcuts. The "sound" keys are not working (f10,f11,12).  There is I need help!

    Hi
    Try the following.
    Hard reset:
    Shut down the notebook, unplug the AC Adapter and then remove the battery. Disconnect all the external peripheral devices connected. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
    Power on.
    Tap away at the esc key as you start the notebook to see if this will launch the Start-up Menu and then select F10 to enter the bios menu.
    Press F5 to load the defaults (this is sometimes F9, but the menu at the bottom will show the correct key), use the arrow keys (assuming they work in this menu) to select 'Yes' and hit enter.
    Press F10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let the system boot into Windows. Check the keyboard.
    Note--
    If you find the keys don't work in the Bios menu, then this is likely to be a Hardware issue.
    thanks,
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • After reinstall my magic mouse and keyboard are not working properly

    so i've had various problems with my mac so did a clean reinstall, now my magic mouse wont scroll and my the f buttons on my wireless keyboard don't work ie volume buttons, i've checked the system preferences and all is well there, any ideas????
    i have a 2008 24' imac

    Hi
    It is not easy to say much about this issue.
    Do you use wireless devices? Are batteries OK?
    Have you noticed the same problem using other USB devices?
    I presume both devices uses USB port on your notebook.

  • SOME OF THE KEYS ON MY KEYBOARD WILL NOT WORK PROPERLY. HOW DO I FIX THIS? I NEED MY COMPUTER ASAP AND APPLE WILL NOT TALK TO ME ON THE PHONE UNLESS I PURCHASE APPLE CARE WHICH I CANNOT AFFORD.(SORRY FOR CAPS ONLY WAY I CAN USE ALL KEYS)

    can anyone help me? my a key, z key, q key, anf backapace key do not work for some reason and when they do it just types out a bunch if random letters and symbols. im not sure how to fix this but apple wont talk to me unless i lirchase something and i can afford to do that. need this comp to work for achool isnthwre a way tonremive keys ans see whats wrong?

    Fast answers:
    1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
    https://discussions.apple.com/thread/3819550?start=0&tstart=0
    2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
    3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

  • KEYBOARD DOES NOT WORK PROPERLY

    SEVERALS KEYS OF MY WIRELESS KEYBOARD SUCH -A-  -S-  AND OTHERS TDO NOT WORK ANYMORE.  I NEED TO REPLACE MY KEYBOARD? IT BELONGS TO A HP TOUCHSMART 520 PC

    It's possible that there is debris under the keys which is preventing them from functioning. If so, this can be solved using one of the following methods:
    Blow out the debris using compressed air
    Remove the keys, clean underneath, then re-attach keys
    Hope this helps.

Maybe you are looking for

  • Issue while deleting a row

    Hi, We have a VL view comprising of B and _TL table. Created an Entity Oject for _TL table , XXXTLEO Created an Entity Object for _VL view,XXXVLEO Created an association between these two EOs XXXToTLAO via Primary Key. Changed the Accessor Name in th

  • I am trying to remove a Photo Album from IPad 4 with no success can you help please?

    I am trying to remove a photo album from my new IPad 4, I have tried several things, connected the IPad to computer etc but with no success. Can you help please?

  • Can't write large files to my WebDAV server

    Hi, yesterday I set up a WebDAV directory on my mini using Apache 2.0.56 with digest authentication. Everything works fine when I connect from home, however, when I tried to access it from work I got some very strange reactions. Connection worked out

  • How to reduce the time..?

    Hi All, this statement below is taking lot of time how can i reduce the time ....? cheers sundeep select * from zausfu where vbeln in so_vbeln                     AND wadat_ist IN so_wadat                     AND aland IN so_eland                    

  • How to reverse Brochure I Fox Mahoney Plugin

    Hello all still new to Motion 5 and learning alot. I am using a plugin called Brochure I by Fox Mahoney. Great Plugin thanks Fox! I have got it to do what I like.... opening...showing some photos then doing a reveal of a video clip but I am not sure