My burned dvd does not play in dvd players

I created an iMovie and it is about 73 minutes long. I had no problems sharing it with iDVD, choosing a theme, and getting it to burn to a disc (it did take quite awhile, but it eventually got there!).
After iDVD finished burning my project, I went to test it out on the family DVD player. It plays correctly until about 20 minutes into the movie and then the picture starts to get all pixel-y and skip. The disc isn't dirty or scratched. I then put the disc in my old Powerbook to see if it would play, and it does.
So, my question is: Why will my DVD only play on computers and not in an actual DVD player? Does this seem fixable, or am I stuck watching my movie on a computer screen?

Hi Rochelle:
Welcome to discussions.
You would probably do better saving the project as a disk image. (Read this from Len Goff):
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Sue

Similar Messages

DVD does not play on DVD-Player

the first time this happened to me:
I built a DVD (it is just one videotrack!)
It plays on the Mac, but as soon as I put it into my player,
it does not work.
Does anyone have an idea,
what I might have done wrong/what could be the reason?
Thanks for any help!
Swantje

I think I did not make a HS SVS.
I have to admit, that I don´t even know, how to do this.
(I am working with DVD Studio Pro 3.
Is this possible with this version?)
What do you mean by ´first play´?
I am working with the german version and there
I can define the ´starting funktion´.
I did choose the track.
In fact the DVD is just consisting of this one track
that it starts with when you put it into the DVD player/into the computer.
I encoded the video with compressor and I used a preset that is already in the menu (less than one hour, high quality)
The audio I encoded with A-Pack.
So far I had the best ecperiences with this.
As I said, the DVD consists just of these two assets:
the video with the audio it goes with.

DVD does not play

I have an NTSC project, which I have burned on a DVD disc (4.7 GB, single layer)My transcode settings were: NTSC DV High quality 4Mb VBR 2 pass
I had no errors after checking it, burned it and it plays fine on my computer. But, when I try it on a standalone Panasonic DVD player, it does not play, it is not recognized, I get a message : can not read disc
What am I doing wrong? Any help will be appreciated

Here it is...............
Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RITEKF1
Format Capacity Blank Disc
Free Blocks 411107328
Free Capacity 4.38GB/4.71GB
Book Type DVD-R
Media Type DVD-R
Manufacturer Rated Speed 16.0x 22160KBps
Available Write Descriptor CLV 16.0x 22161KBps
Available Write Descriptor CLV 16.0x 22160KBps
Available Write Descriptor CLV 8.0x 11081KBps
Available Write Descriptor CLV 8.0x 11080KBps
Available Write Descriptor CLV 4.0x 5540KBps
Write Strategy Speed 4.0x 5540KBps
2x Speed OPC beta 09
2x Speed OPC power 0F
2x Write Strategy field 1 15 87 88 90
2x Write Strategy field 2 A8 82 00 20 00 00
4x Speed OPC beta 06
4x Speed OPC power 16
4x Write Strategy field 1 10 14 0F 0B
4x Write Strategy field 2 94 07 0D 0B
4x Write Strategy field 3 80 00 00 00
4x Speed OPC beta multi-pulse 09
4x Speed OPC power multi-pulse 1E
4x Write Strategy field 4 17 A7 89 85
4x Write Strategy field 5 B7 89 02 00 20 02
4x Write Strategy field 6 00 00 D0 00 00
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
Complete Media Code
00000000 00 6A 00 00 01 40 C1 FD 9E D8 52 00 02 87 0D 13 [email protected].....
00000010 87 88 90 00 03 52 49 54 45 4B 46 00 04 31 00 00 .....RITEKF..1..
00000020 00 00 00 00 05 88 80 00 00 00 02 00 06 09 0F 15 ................
00 6A 00 00 01 40 C1 FD 9E D8 52 00 02 87 0D 13 [email protected].....
87 88 90 00 03 52 49 54 45 4B 46 00 04 31 00 00 .....RITEKF..1..
00 00 00 00 05 88 80 00 00 00 02 00 06 09 0F 15 ................
Does this give you a clue as to what the problem might be?
Please keep me posted

Imovie iDVD finished but DVD does not Play in ALL DVD players?

I have made several DVD movies over the years and sometimes when i go from imovie> idvd> finished DVD
1. it does not play in ALL dvd players? why?
2. or sometimes plays in some DVD players?
3. sometimes plays in computer( apple) dvd but not always?
Is there something i have to due before, after or during rendering so that the finished DVD plays in all DVD players
thanks

Hi
*I do put paper labes on discs --*
NEVER DO THAT - The ability to get them perfectly centered is near to impossibly
DVDs are many tims more sencitive to missaligmement by 1/100 or 1/1000 of a millimeter.
CDs often can handle this - but still not advicably.
I do.
• Use only Verbatim (Taiyo Yuden - also recommended by many - no own experience)
• DVD-R (no +R or +/-RW)
• Burn at an as slow speed possibly eg x1 with iDVD08 or higher or Roxio Toast™
or Apple Disk Util tool
• NEVER under 25Gb free space on internal boot hard disk (others not important)
• I use a Cleaning-DVD from time to time
• I burn max 3 DVD at a time then cool for 20min
• I use the Cleaning DVD on my other players as well
On Quality.
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

DVD drive does not play some DVDs properly

Hi,
My Macbook was purchased in 2007; So it is a bit old. I haven't used the DVD drive very often.
I bought two new DVDs from Amazon recently. However, when I played them in my Macbook using DVD Player, the disk pauses and skips very often, making it impossible to watch the DVD. In addition, the Player would display the "Skip over damaged data" warning.
I thought it was a problem with the software (DVD Player); so I installed the VLC player. Problems occurred as well. Disk would pause and then simply stop (the screen closes).
I thought that perhaps it was the problem with the Amazon DVD disk. So I played some other DVDs in my Macbook, with both DVD Player and VLC Player. There was NO problem at all with the other DVDs.
Then my conclusion was that the Amazon DVD was faulty. I requested a replacement, which they sent to me promptly within a day.
However, the same problem occured. The replacement DVD would not play properly in either DVD Player or VLC Player in my Macbook. It would pause and skip very frequenntly.
Now I began to suspect that maybe the Optical Drive was faulty. So I brought the DVD to my school and tried to play it in two computers: one PC (with VLC); the other Mac (DVD Player). To my surprise, the DVD played flawlessly in those two computers.
Now my conclusion is that the optical drive of my Macbook is faulty.
However, after doing some preliminary research on the internet, I find that replacing the internal optical drive is a difficult process. The alternative seems to be buying an external drive. But there seems to be concern about booting the computer (when the need arises) from an external optical drive.
Questions:
1. Is my conclusion justified? (That I have a faulty optical DVD drive)
2. If the optical drive is faulty, then why do some DVDs play with no problem in my Macbook?
3. Would you recommend replacing the internal drive or puchasing an external optical drive? What are the advantages and disadvantages to both?
Thanks a lot!

Thanks again. I went ahead and deleted the DVD Player folder and the plist file.
The result is that it appeared to temporarily improve the playback of the DVD. For the first two hours, the DVD paused considerably less and each pause was of a relatively short duration. There was much less skipping. So the playback was almost tolerable, if I lower my standards.
However, after two hours, it reverted to its old ways. The pauses and skipping became so frequent and long (as before) to make the DVD simply unwatchable.
I don't know what to make of this.

DVD Player does not play a DVD

My DVD player can play commercial DVD without any problem.
I use a DVD Video Recorder to burn a DVD. I finalised it confirmed it can be played in my Windows PC PowerDVD version 6 OEM edition.
When I put it in my PBG4 superdrive, the DVD Player could be launched automatically. However, it says "Supported Disc Not Available". Checked Disc Region is 1, 2, 3, 4, 5, 6 and my Drive is in Region 3 with 4 changes left.
Any idea?
PowerBook G4 1.5GHz Mac OS X (10.4.6) DVD Player App version 4.6.5, Framework version 4.6.6

If you burned a DVD-RW, the DVD Player might not recognize it. In this case, use a different brand of DVD-RW or a DVD-R disk.
(12472)

DVD Does not play in regular DVD Player

So I created my DVD and it does not play in a regular DVD player but it will play on my mac. I have had issues before with it being formatted as an HD DVD on the older version of DVD Studio Pro so I checked that and it is formatted as an SD DVD. So I checked the Build log and found notes saying that certain files were not part of the DVD directory and would not be included on the DVD. I have never seen anything like this before so I am assuming that is my issue, but I have no idea how to solve this.
Any suggestions would be greatly appreciated.

The warnings are the normal ones I am guessing (.lay will not be included etc.)
When you open the DVD in finder on the Mac, do you see folders called VIDEO_TS and AUDIO_TS or are there pother folders? If so then you may have made a HD DVD again. Could be the issue, or your old build location still had old HD DVD files in it.
What type of media (brand?) did you use? How many players did you try?

DVD DOES NOT PLAY - WINDOWS MEDIA PLAYER OR VLC PLAYER

I have Windows 8 64-bit OS with latest updates. I tried to play a Zumba fitness DVD, however, it does not play in Windows Media Player or VLC player. I receive an error, Unknown Disk. Other DVDs do play.
I tried to play the DVD in Linux (Videos) and I also received an error, however, I could easily resolve the problem here as it was determined that the disk is protected and I downloaded the fix for Linux.
How do I resolve the problem in Windows?
Kind regards.

Hello,
I found a solution here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-pictures/cant-play-copy-protected-dvds-anymore/44c8f028-212f-4ef4-900f-984e763e1c00
I posted the information here:
This is could be due to the DRM (Digital Rights Management). Let’s try these steps and check if it helps.
Rename the DRM folder:
Step 1:
a. Start Windows Explorer. To do this, press Windows key + E from desktop.
b. Click on View and place a check mark on Hidden items.
Step 2:
Locate the DRM folder on the computer. Typically, the DRM folder is located in the following location.
a. C:\ProgramData\Microsoft\Windows\DRM (where C:\ is the system drive).
b. If you are not able to rename the DRM folder because of Access Denied error, you will have to take permission of the folder.
Refer to this section "Issue 2: I'm unable to access, edit, save, or delete files and folders" from this link to give proper permission to the folder.
http://support.microsoft.com/kb/2623670/en-us
Steps 3:
Reset the DRM security component.
To do this, visit the following Microsoft Web site, and then follow the steps to upgrade the DRM security component:
http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
Note: Access this website via Internet Explorer.
For more information, refer to the link.
Windows Media Player DRM: Frequently asked questions
Hope this information helps. If you have any concerns, please let us know.
Just so you know, You posted in the incorrect forum. You should have posted this question under Windows 8.1 Forums to receive the proper support. However, I hope my suggestion helps.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

DVD will not play in dvd player

Hi,
I created a dvd in dvdpro and put into my dvd player and it says it can not play my dvd. Is there some sort of setting that I missed?

You misunderstand. You most likely created and burned an HD DVD in DVD Studio Pro.
iMovie will only build and burn standard DVDs so of course it will work.
Drew put up a link to another thread where this is discussed is excruciating detail. Read through it and you should be on you way to addressing your problem.
x

Burned DVD does not play in MacBook Pro but does in other computers.

Hi, everyone. I have recently had some issues playing backed up copies of DVDs that I have. These two particular DVDs have not been able to play properly with DVD player. They will begin playing but never actually make it to the main menu screen. I have tried downloading other media software, such as VLC, but this has not been of any help.
What's even more bizarre is that they successfully play in my old Dell computer (Inspiron 700m) and a desktop HP that the rest of the family uses. Does anyone have any insight or advice? Thanks.

In addition, make sure the burned DVDs are not dirty, cracked and/or smudged in any way. http://docs.info.apple.com/article.html?artnum=50448 *How to Handle and Clean CD and DVD Discs*
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
!http://i50.tinypic.com/izvwo1.gif!

DVD does not play back on all computers and DVD players after burning

I have built and formatted a dvd using dsp but it will not playback on laptops even though it works fine on dvd players macs, and pcs. On some laptops there is no sound others just crash. Is this a problem with the laptops or how i have formatted the dvd?

suggestion 1
If you are trying to playback on a PC laptop running windows:
Do not use Windows Media Player to play back the DVD, it wont work, it is not a DVD player.
Use the software supplied with the DVD drive such as Win DVD or Power DVD.
suggestion 2
The disc format is incompatible with the DVD drive:
If the disc you created is a DVD-R and you play on a DVD+R drive, or a DVD+R disc played in a DVD-R drive then the disc will not play.
suggestion 3
the drive is a CD drive not a DVD drive

Burned DVD does not work in all players

Hi all,
I am quite new to authoring my own DVDs, but since I married more or less recently I thought it is a nice idea to author a DVD with our wedding pictures for family and friends. So I spent enough time in iDVD selecting themes, slide shows, music etc. Finally a previewed everything and - yeah - happy.
So I wrote a disk image and burned this using the apple disk tool. So far so good. Mounting the newly recorded DVD workes perfect and the DVD player app works like no charm. Every menu, sound - as I want it.
Happy, running down to the living room and try it in the stand alone DVD player (Sony HD recorder) and - big disappointment. DVD runs, first menu pops up, and the slide show starts. But after the end, it does not return to the menu, it just keeps looping the slideshow. To make it even worse, the menu button on the remote just restarts the slideshow. What the f... is wrong?
Is there something I can to / configure to make it work correctly?
Any help is appreciated.
Thanks & Cheers,
Daniel

Daniel,
On your mac, open the disc image with apple's dvd player application. Assuming it plays exactly as expected and there are no issues with scene selections, buttons, etc.
Now you can use apple's disc utility (or Roxio Toast) to burn it to dvd-r. I recommend Verbatim, Taiyo Yuden, or Maxell for best results. Do not exceed 4x burn speed.
Let's say you get this far and the burned dvd plays perfectly on your mac. Now it's time to try it out on a set top dvd player. Sony makes some fantastic dvd players but I would try other players as well. Best place to do this is at a store that sells dvd players like Fry's Electronics, Best Buy, Walmart, or whatever stores are available in your own area.
Hand the dvd you created to a salesperson at one of these stores and ask the him/her to help you test drive a variety of set top dvd players to see which ones accept the dvd in question. My guess is that it will work fine on most of these players but if not just come on back for more help.
Message was edited by: SDMacuser

Video does not play from DVD

On my iMAC with Mountain Lion, I exported a Video from iPhoto to the desktop, put it into a burn folder, and burned it to a DVD. When I open the Video on the the DVD, it loads as DSCN0097.AIV. When I click on the play button, I can see the progress line moving but it does not show the Movie. What did I do wrong?

You need a vided DVD authoring applicatin like iDVD. If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

DVD Studio Pro will burn but will not play on dvd player.

Hi,
I have a 30 minute dvd with a menu that i burned yesterday. it will play on my mac but not our dvd player or any of our Pc's. I have a quickly approaching deadline and guidance would be appreciated.
Andrew
ilerp.com

HD DVDs will only play on Macs and a couple of now obsolete Toshiba HD DVD players.
Since DVD is a standard definition only format, you will need to create a regular DVD if you want it to play on regular DVD players or on Windows systems.
-DH

CD/DVD does not play audio CD,it does play DVD and in rare ocasions it plays the audio CD but mainly if the computer is just turn on,any help will be very usefull,THANKS in advance it's a PowerBook G4

PowerBook G4
Problem with CD/DVD doesn't play audio CD but it does play DVD, and today it play audio CD but after ejected it did not play it again and ejected automatic.
Any help grately apreciated Thanks in advance.

Hello,
Sounds to me like there is a problem with the optical drive. I would recommend replacing it.
Have you tried to cleaning it?

My burned dvd does not play in dvd players

Similar Messages

Maybe you are looking for