My business system not visible

Hi all,
   I created one business system using 3rd pary when I
am going to assign in "Integration Directory" it is not
coming in list.  Then when I am trying to create the BS
in SLD with same name and Logical system then it is
showing "Already exits". But in SLD also not
visible...??? What will be reason. How to get my BS in
ID?
regards,
Khaja.

Hi,
   It is not added in any other scenarios.  When I done "Cache Notification" then I am getting this Error
"com.sap.aii.ib.server.abapcache.CacheRefreshException:
Unable to find an associated SLD element (source
element: SAP_XIIntegrationServer, [CreationClassName,
SAP_XIIntegrationServer, string, Name, is.01.apollo,
string], target element type: SAP_BusinessSystem)
Regards,
Khaja.

Similar Messages

  • Proxy Runtime for Business System not visible in RWB.

    Hi,
    We are running SAP PI 7.10 SP7.
    The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
    There is Business Systems configure for both the Application systems in the SLD from the registration.
    In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
    Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
    Please can you assist in this matter?
    Regards
    Willie Hugo

    Hi,
    The problem is solved with patches to the following JAVA components.
    MESSAGING 7.19
    SAP_XIAF7.17
    SAP_XITOOL7.14
    Regards
    Willie Hugo

  • SPROXSET ...Unable to rectify Business systems not found issue..

    Hi,
    On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
    I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
    Teresa

    Check RFC destination
    The below links may be useful
    How do you activate ABAP Proxies?
    How do you activate ABAP Proxies? - Activate Proxy
    ABAP Server Proxies - ABAP Server Proxy
    ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
    BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
    File to R/3 via ABAP Proxy - ABAP Proxy
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

  • Business system not found in CPACache

    Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
    CPAcache refreshed for dela  as well as full
    Adapter specific identifiers are fine
    SLD cache cleared in IR ID
    Business System name is found in CPAcache
    error repeated
    Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
    Still error is repeating.
    Can anybody give a solution for this problem please?
    Regards,
    Venkat

    Hi Venkat,
    The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
    However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
    Regards
    Pothana

  • Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

    Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

    The current latest version is 33.1. Please get the newest and latest version at getfirefox.com if this 33.1 is not listed as your current version.

  • Business Systems not appearing in the Integration Builder (Configuration)

    Hi Experts,
    I have created new business systems in the Integration Builder of my PI System.
    This is not appearing in the Integration Builder.
    I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
    Thank you.
    Thanks
    Kasee

    Business system from SLD not visible in Integration Directory

  • Business systems not showing in I.D( Integration Directory)

    Hi Guys,
    I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
    Thanks
    Kiran.B

    Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
    If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
    Regards,
    Jai Shankar

  • SLD Business system not appearinn in Integration Directory Configuration

    Hello,
    I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
    Integration directory and assign a business system without a partner,I am not able to see this business system.
    can any one please help.
    regards
    kaushik

    environment -> clear SLD cache

  • Business System not reflecting the XI Content for SRM

    Hi,
    We are currently working on the SUS-MM scenario.
    The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
    Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
    The current status:
    We can successfully transfer vendors from SAP R/3 to SUS
    We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
    Our Main Issue:
    The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
    On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
    Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
    Any help would be appreciated.
    Thanks
    Venkat.

    Hello,
    do you have a solution? I'm facing the same issue.
    Regards,
    Sven

  • Model Configurator - Business System not listed

    Hello,
    I have the following problem when using the model configurator to create a configuration scenario based on an integration scenario.
    I want to assign a communication component to a product. However the according communication component is not listed in the value list for a specific product.
    I have added the product to the business system (installed) in the SLD and also cleared the SLD cache. However the communication component is still not listed.
    Any idea what else I could try?

    Hi, I have the same issue. How did you make it show up in the value list? The input box on Model Configurator won't simply let you type it in.

  • Business Area not visible to account with admin privileges

    Hello,
    I've encountered the following scenario on visiting a client site:
    A Business area has been created by the EUL owner account (IFL) and he has granted admin privileges to another account (BRIANB who has been granted the DBA role). However, when BRIANB logs onto DIscoverer Admin, the Business area in question is not visible. BRIANB is able to create a new business area in the EUL which includes folders that are part of the 'invisible' BA. BRIANB is not able to access the 'invisible' BA using Discoverer End User. I'd be very grateful if anyone out there has an explantion for this,
    regards,
    KEvin.

    Problem solved. My client inadvertently created an additional EUL when initially logging onto Disco Admin as BRIANB. Thereafter this was the default EUL. The errant EUL has now been deleted the required BA's are now in view,
    Kevin.

  • Transport target for business system not found in System Landscape Director

    Folks,
    We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
    We are getting following error when we try to import an interfaces in to new PID system:
    Import failed because of business system transfer object
    Communication component XID_FileSystem: Obligatory
    transport target for business system XID_FileSystem not found in
    System Landscape Directory
    We are yet to install PIQ system.
    All the interfaces in the old XID system have transport target of XIQ system.  I removed the  transport taget for the interface, but transport target is still showing in the Business system under transport target head.
    How can we overcome this issue as we will not have PIQ system atleast for two weeks.
    Thanks in advance,
    Regards
    Chandu

    Hi,
    You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
    Illustrated with DEv & PRD here.
    Procedure:
    1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
    2) Call SLD (System Landscape Directory) Component from the Integration builder
    Save all the Following .zip files on the Local Desktop
    3) Select the Software Component & say Export that you want to Export from DEV
    Server to Production server and which is going to use in the IR of XI
    4) Also Select the Product of the above SWC and say Export
    5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
    6) Select the Business System(s) & say Export; those are associated with above Exported
    Technical systems.
    In Production Server
    1) Logon to the SLD of the Production Server.
    2) Create a Technical System and Business system which points to the Production SAP R/3
    3) Go to Administration TAB in the main page of SLD
    4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
    5) Click on Browse and select the .zip files that is to Import into Production Server,
    Which were stored on the local desktop at the time of DEV Server Export
    And say Import Selected File Option
    By this we exported and imported the SLD Objects
    Now we have to create transport groups and transport targets in the Production server of SLD
    Creation of Transport Groups
    Edit GroupsGroup1) Select the Business systems 
    2) Click on New Group and give the name of the group as DEV_group & select the
    Corresponding Development serveru2019s integration Server
    3) Similar way create another group for Production serveru2019s business system as
    PRD_group and select the Production serveru2019s integration Server
    Creation of transport targets
    This is to Define which business systems in two different groups correspond to each other
    1) Select each Business system in the SLD and select transport TAB---click on
    Add/Change Target and select its corresponding target business system.
    For Example:
    If you select the business system of Production XI server means
    In the target you have to select group as DEVGROUP and the business system of Development XI server.
    Like this do the same for other business systems also
    Ex:
    BS_PRD_Integration Server----
    BS_DEV_Inetration Server
    How to create Transport Groups & transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards
    Seshagiri

  • AS ABAP System not visible on SLD

    Hi Gurus,
    We have newly installed a CRM 2007 system (QA) and completed most of the post install activities. We have the requirement of connecting an XI system to the CRM system, and we are trying to configure the SLD. Here we are facing a wierd error. The AS ABAP technical system which is supposed to automatically show up on the SLD, is not seen. The AS JAVA technical system is seen but some details are wrong. Some explanation of the current scenario.
    1.  Our SLD system is a central system, on which the SLDs of all the systems are maintained.
    2.  I have maintained the PIAPPLUSER password in T-Code SLDAPICUST. This ID also exists in the XI system.
    3.  I have executed the T-Code SLDCHECK, and it does not show any error execpt that Business system is missing. I could not create the same as the Technical system is still missing.
    4.  In T-Code RZ70, I selected all the options, and clicked on activate.
    5.  I also checked the data in the SLD Data Supplier in the VA of the CRM system, and found all the data to be consistant. I also triggereed the data transfer to the SLD.
    Could anyone please help me out in getting the AS ABAP Technical system automatically? Any extra configs I need to do to set this thing right?
    Thanks & Regards,
    Savan D.
    Edited by: Savan Kumar Dundoo on May 19, 2008 7:59 AM

    Have you checked [SAP Note 1115244|https://service.sap.com/sap/support/notes/1115244]?
    Peter

  • Business System Not coming up in configuration

    Hi All,
    I am new to SAP XI.
    I was  trying to create a scenario for transfering the data from IDOC on to an flat file.The business system which I created in SLD is not coming up while assigning the same in the configuration part.
    I had the following doubts:
    1.When the IDOC is send from the ECC system the business system needs to be configured to ECC,right?
    2.If the above statement is true, can you please suggest the reason why it is not coming up in the configuration part?Is there any way to find what the reason would be?
    Regards,
    Rupesh.

    Hi,
    Business system needs to be created in XI SLD.
    You have to done following configuration for Idoc scenario:
    - Sender system:
    SALE (define logical system, model configuration etc) /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    - XI system
    SM59 RFC destination for sender system
    IDX1/IDX2 port and metadata.
    business system configuration on XI SLD
    Regards,
    Gourav
    <i>Reward points if it helps you</i>

  • Business system not known to SRM

    Hi,
    We are able to send and xml PO to SRM server, but we are getting ABAP Application error in the pipeline service of the IE of SRM.
    In SXMB_MONI in SRM:
    Under Trace:
    <CONTROLLER />
    <FAULT_TEXT>An error occured within an XI interface: SLD system QA2_220 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 92</FAULT_TEXT>
    <FAULT_URL />
    <FAULT_DETAIL />
    Under Error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Call Inbound Proxy
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>Application</SAP:Category>
    <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
    <SAP:Stack>The application triggered an exception</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    QA2_220 is defined in the XI SLD, and it is the sender service. I am not sure why it is saying "QA2_220 is not a known programm." Does anyone know why we are getting this error?
    Any help is appreciated.
    Thanks,
    Karma

    You need to associate the Logical System in SRM with the SLD Business System.
    This is how to do it.
    In the SRM system, go to the IMG through SPRO:
    Goto SAP Implementation Guide->Supplier Relationship Management->SRM Server->Technical Basic Settings->Define Backend Systems
    You should have the logical systems defined there.  Scroll to the right and add the SLD Business system name under the "System Landscape Directory Name"
    This should do it.  Now when SRM tries to process the message from the Business system, it will look up the corresponding logical system from this entry.
    Regards,
    Jay

Maybe you are looking for