My C5 5mp not starting after software update

Hi , need help.I was updating my nokia C 5 5 MP software update and during update got a call. i didnot not answere the call but my software update gave me an error and disconnected my phone. Now my cell phone is not restarting. Wat shud i do.

Welcome to the Apple Support Communities
It looks like you turned off the Mac during a firmware update. If you turned it off, the only solution is to take the Mac to an Apple Store to get the computer repaired, but first, as a last try, reset the SMC > http://support.apple.com/kb/HT3964

Similar Messages

Nokia E5 not starting after software update

Hi
I today updated my software through wifi. after download, it tried to restart the phone and didnt restart at all. Its completely dead now.
Please help.
Regards
Lalit

Hi lalit20,
Welcome to Nokia Discussions.
If your device does no longer switch on after updating through WiFi, try connecting the phone to Nokia Suite and see if you can reinstall the current software. You can do this by clicking on the green arrow in Nokia Suite, the option to reinstall the current software will be displayed in blue in the bottom of your screen.
If the device does not respond after connecting it to Nokia Suite or you're not able to reinstall the software, please visit a Nokia Care Point where the phone can get looked at and sent for repair if necessary.
Let me know how you get on.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

ITunes will not start after software update yesterday

Using recent version of iTunes to manage my iPod Touch on a ThinkPad T400 with Win7 Pro 64-bit.
I was offered a software update last night, and took it. It appeared to install OK and required a reboot, which I performed.
Now I cannot run iTunes at all. In the Processes view of Task Manager, the iTunes process appears and then disappears without any kind of UI error message.
I heve rebooted again. I have downloaded the 10.4 installer from http://www.apple.com/uk/itunes/download/ and used the repair option.
No good. Rebooted. No good. The file version from Properties of iTunes64Setup.exe is 10.4.0.80 by the way.
Stopped the Bonjour service. No good.
So now I cannot get my latest podcasts onto my iPod and I am extremely unhappy.
Any ideas please?

If you downgrade, uninstall Apple compatibility support also from Programs as that seems to be the crux of many issues, both with iTunes but also Safari.
The other "crux" is that QT 7.7 and Safari 5.1 are security patches/updates deemed "critical/essential" category. Safari you can probably do w/o. iTunes is "dot zero" (10.4.0).
iTunes: I am always doing this that bring UAC to blank the screen, and refuse to disable that security feature, but that also means iTunes video (music, movies etc) will also go blank.
Other feature I have had with itunes is that it will go into a process thread lock wait state between video/movie and require a kill thread.
In 5 yrs Vista/7 I've had more issues with Apple software than anything else bare none.
Trouble installing Apple iTunes or QT Windows
Removing Apple software components Windows
iTunes Windows Troubleshooting security software issues
Removing Apple Software Windows XP

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Iphone could not activate after software update

iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?

Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier?

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Macbook battery not charging after software update

I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!

Hi imi_uk,
I see you marked this question as "solved" is that the case?
If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility.

Firefox will not start after interrupted update to 5.0

Lenovo x200 | Windows 7 32bit | Firefox 5.0
I was updating Firefox from version 3.6 (I think) to 5.0. Simultaneously I had done a update on Windows that seemed to have stopped. The update of Firefox had also come to a stop. As I remember it the installation was complete, and I was attempting to start the program, when Firefox was checking compatibility with installed plug-ins and so forth.
The Windows updates installed fine afterwards but after several reinstalls of Firefox, I still can't seem to get it to start.
There is no error message or notification at all when trying to start Firefox.
One processes is created, staying steady at 50% CPU and 26 404 K memory.
If i try to open another instance of Firefox I get a process that takes 0% CPU and about 1 844 K memory.
Summary:
Firefox fails to start after interrupted update to 5.0 from 3.6.
There is no error message.
Firefox never starts (and the process never shuts down), just shows in the Task Manager under Processes steady at 50% CPU and about 26 000 K memory (I've seen it do this for at least 20 minutes, before terminating it).

Thanks kenton. But now pop-up says beta 5.
The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
The machines are identical IBM T60s with Windows XP.
This is a real mystery, as well as being annoying.
A clue or suggestion any one?

HT5654 phone in not activate after software update

phone in not activate after software update

Activation issues are typically the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Macbook pro (snow leopard) will not boot after software update

I helped my mom buy a Macbook Pro for herself for Christmas. Today, I connected it to her old eMac and used the migration assistant to transfer files over. It was unable to estimate migration time on the only user (after 45 minutes) so I didn't migrate the user. Then I tried to pair her macbook to her new bluetooth keyboard, but no magic happened, so I tried to use the bluetooth setup assistant, which crashed. So I ran a software update, hoping that this would fix whatever the bluetooth problem is. Despite having updated on the 23rd, there were 4 updates. None seemed applicable but I installed them anyway. Now the computer won't boot at all.
Software update said that I had to restart for the updates to take effect, so I restarted. The harddrive went whirrrrrr and the grey screen with the apple logo and the spinning circle displayed. Then the harddrive stopped going whirrrr and 10 minutes later, I started looking on the support site for what to do. I found this:
http://discussions.apple.com/thread.jspa?messageID=10564149&#10564149
Per the instructions in the last post, I fscked the drive (although -f, in accordance with the fsck help). This found no problems. The next suggestion was to boot from the OSX install disk. Only one problem-- there was a disk in the disk drive when the problem occurred and the disk eject button apparently only works while in the gui. I can't install from disk if I can't get the existing disk out of the drive.
So, any other ideas on what I can do to get this machine to boot?
Message was edited by: jenlarkin

Hi Jen:
Since it's new, you're entitled to 90 days of phone support (3 years if you buy AppleCare). It sounds to me like you may have some hardware issue(s) going on - you should not have the sorts of issues you're having with a new Mac. Apple will probably be much better and faster about getting you fixed than this board may be able to if that is the case.

Scanner samsung scx-4300 does not work after software update v 2.3

hi everybody,
i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
I'm no longer able to scan from my Samsung SCX-4300
on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
is there a way to uninstall the software update?
thanks.

What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
If I delete the following:
- Samsung folder in /Libraries/Printers/
- Samsung Scanner.app in /Library/Image Capture/Devices
Will it remove samsung driver for printer and scanner?
If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

Phone not working after software update!!

i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

Hi and Welcome to the Community!
Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Safari and Mail will not open after software update

After doing the monthly software update yesterday, my Mail and Safari programs will not open. I click on the icon in the dock or in the Applications folder and I get nothing. The icon in the dock jumps, but nothing opens. I've read several other discussions and tried dragging several files out of the library, such as plist files and history, etc., but they still won't open. The software update only updated iTunes and iPhoto and included the most recent security update. I have not tried to reload Safari. If I do that (and it works), what do I need to do for Mail? Will I lose all my emails? Can someone tell me what I can do to get both programs back working properly? Thanks!

Another approach is to reapply the 10.3.9 combined update. "Repair permissions" via Disk Utility in your Utilities folder.
As far as your e-mail's are concerned, the database files are maintained in your User account>Library>Mail folder. It's very important you backup this folder periodically to external media regardless of circumstances to preclude losing your e-mails in the event of file corruption.
Best maintenance strategy is a full backup of your HD on a bootable external (firewire) hard drive. Makes life a lot easier in the event you need to revert your HD to its state prior to an System Update gone bad.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

Firefox will not start after an update.

I have to manually uninstall Firefox and manually install the update every time.
I asked a similar question before. The response was to start in safe mode. BUT the program will not start. It acts as if there is a software switch set to "don't run this program under any circumstance." The switch is either in the registry or among the program files, because these both get cleared on a manual uninstall. The update procedure is not clearing the registry or the program files.
Does the update process uninstall the previous version and then install the update version?
Part 2 --
I often cannot find the update manually on the Firefox site.
I am on the Beta release channel. The current release is 33.0 beta 4. However, the most recent on the site is beta 3. Where is 33.0 beta 4?
OS is Windows XP latest release.

Thanks kenton. But now pop-up says beta 5.
The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
The machines are identical IBM T60s with Windows XP.
This is a real mystery, as well as being annoying.
A clue or suggestion any one?

My C5 5mp not starting after software update

Similar Messages

Maybe you are looking for