My camcorder videos are not capturing properly

The same thing is happening to all the video that I capture from my video camera: Once or twice every second, there is a "pop" in the audio, and then the audio skips ahead by a fraction of a second. Sometimes the video skips ahead too, but not as frequently. I've made several capture attempts, and sometimes the audio and video get out of sync and sometimes not. But it always does that popping and skipping ahead thing.
The first time this happened, I got an error dialog that said something about the sample rate, but then I never got that message again, so I really can't say exactly what it said.
I used to capture video from this camera all the time with no problem, a couple years ago. But now, no dice. I've tried it on both of my computers and the same thing happens. I've also tried iMovie -- again, same deal.
My first thought was that maybe I had changed the audio sample rate setting on my video camera, but I've searched the manual and it looks like my only options are 12bit and 16bit. I tried both and got the same result.
I'd sure appreciate any help you can provide, cause I'm completely stuck until I figure this out. Thank you!

At first I thought you might be a newcomer doing something terribly wrong but it appears you have successfully used FCP and that camera on previous occasions.
Does the camera still playback correctly?
What version of FCP have you got and have you updated your OS recently as there may be an incompatibility?
As this is an apparent mystery the first thing you could try is to trash your preferences exactly as described here:-
http://www.fcpbook.com/Misc1.html

Similar Messages

Do you have fix for Photo Booth Audio and Video are not syncing properly, Do you have fix for Photo Booth Audio and Video are not syncing properly

My audio and video are not syncing properly. There is a lag from the audio to the video. Does anyone have a permanent fix for Photo Booth where the Audio and Video are not syncing properly?

If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. You aren't the only one having this problem.
One person having a Photo Booth problem, although not the same one as you are having solved it by running Disk Utility/Repair Permissions.

Videos are not buffering properly...way too slow, then buffering stops without finishing.

This is not only with YouTube...it's ALL videos..I've updated all plugins.
Also, I cannot enlarge any of the small photos on Facebook...I only get the black rectangle background...My account works fine from another computer (not my own at all), so I assume it's a Firefox setting issue somehow and not a FB setting issue.

Is there any youtube settings??? Can any setting be changed which relate to youtube? And is it possible to watch youtube through safari and not through the standard application?
NO, there are no settings. Flash will not play in Safari yet, but there is a workaround using VideoHamster.
Here are a couple of Flash YouTube videos on my server that I converted to QT with CosmoPod. How do they load for you? I have a 1M up cable connection. They should start loading and playing after a few seconds. YouTube videos start playing after about 5 seconds on mine.
http://bmer.servemp3.com/test/
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

My videos are not rendering properly

my videos icon does not look the same and it wont play . but it shows its saved as a mp4

For the past few days videos are not playing properly. They appear to load but stop and start, even though the line of thumbnails shows up at the bottom. Clicking play does nothing.

There seems to be a major problem with video playbacks both from web sites and YouTube. If I click on a video the loading circle shows it is loading but either the video starts for 2-3 seconds and stops, or it won't start at all. At the bottom of the screen there is a section that shows individual thumbnails for the video and that shows that the video has loaded, but it refuses to play. I just tried a youtube video on my iPhone and the same thing is happening. Some occasional videos seem to work okay but I have spent much time trying to watch clips.

Use SpeedTest to test the speed of your internet. If slow, contact your ISP to confirm if the problem is on their end.
You have 2 versions of QT. Version 7.x is inside your Utility folder. Try that one.
=================
The latest version of Adobe FlashPlayer can be obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157 and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

IPod touch 32 g 4th gen video function not working properly

So I am having 2 major problems with my iPod. 1, is that it won't let me add videos of any format tO my iPod other than .mov files and frankly since I have over 100 different videos on m iPod it would be kinda annoying to have to convert each one one at a time. This hadn't started happening till the last iPod software update whicy happened around last weekend. My 2nd problem is that my videos are not orginizing properly. For example under my TV shows section I have a show that should only have 26 episodes in it. Instead it has around 80 episodes in it which consist of other tv shows I have added but my iPod does not recognize that they do not belong there. I keep my videos very organized by episode, show, season, etc and I don't know what to do. I've tried restoring my iPod and that didn't work.
My computer specs go as follows: thinkpad laptop, windows 7, latest iTunes and iPod touch software

The 'wrong sorted TV episodes' bug was the first thing I noticed on 4.2.1's video player. I'd say the whole media part is buggy as never before, at least for me. I absolutely agree with you and in addition to this (as I mentioned here http://discussions.apple.com/thread.jspa?messageID=12686533#12686533) the swipe to delete function on both podcasts and videos seems to be broken, not deleting properly.
I'm also using Windows 7 (64-bit) for syncing, if anything could be related to Windows iTunes or Windows 7.

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Videos do play but are not loading properly and plays choppy.

Videos on websites as www.omesakevideo.nl do play but are not loading properly and plays choppy, I don't have this problem in Safari or Chrome

Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

Youtube videos do not play properly

I appreciate any suggestions with this problem. I have a Mac G4 laptop (PowerPC) running OS 10.4
Most web videos do not play properly on my computer, especially if they use Adobe Flash Player. (QuickTime videos play fine.)
I have had my internet connections checked by my provider, and the speed is very good, and the configuration is OK, so they do not understand why I am having trouble. When I try to play YouTube videos, I get a slideshow, with a new frame every 2 or 3 seconds. I have tried using my computer on my friend's internet connection, and it has the same problem. My friend can watch the same YouTube video perfectly well on his own computer, even though his download speed is much slower than mine.
I have already tried the following fixes several times:
complete uninstall of old versions of Flash Player
reinstall of the latest version of Flash Player. (My computer does recognize that the player is there, as I said, it just plays the video as a slideshow.)
Repairing permissions and restarting
resetting Safari, manually clearing cache, cookies, etc. (Although I also have the same problem in Firefox)
Downgrading to Flash Player 9
Trashing QuickTime Plugin.webplugin
Trying to trash all DivX files (I don't have any, it turns out)
making sure audio midi settings are for 44.1
trashing the Macromedia preferences folder
None of these things have helped me. Thank you in advance for any other ideas of things to try.

Rogerskth,
Sorry, I wasn't clear. My computer NEVER played flash videos properly, with any version of Flash. Considering that Flash is maxxing out my CPU power (as measured by the Activity Meter) I suppose that slow CPU speed really IS the cause of my problem. Since you have a faster computer, and your computer used to play the videos OK, it seems likely that your problem is SOME OTHER mysterious problem.
Bungee33,
You might be pleased to know that in English we have the same expression as the German which you quoted
"we in Germany say, that a horse given as a present must not be critizised by judging the teeth in the mouth of the animal"
In English, we say "don't look a gift horse in the mouth."

My laptop speakers are not working properly so wanted to visit service centers of hp in london

from yesterday night my laptop HP pavilion g6 speakers are not working properly. out of many only one speaker is working so i want to visit authorized service centers so that i can fix the issue.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56460.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has had any effect on the audio issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Images are not displaying properly i.e Broken

images are not displaying properly i.e Broken .they are not opening in any website even in facebook

Hi Himanshu,
Tools>Internet Options>Advanced tab, click the "Reset" button.
Close all open IE windows and then start IE and try again.
Post consumer questions about IE to http://answers.microsoft.com (Help>Online Support menu from IE.)... at the answers forum you have to select what version of windows and IE you are using with your question...
which you did not stipulate here.
You can also choose at answers your preferred language and receive an answer in your preferred language.
Also include with your questions to answers, the FULL address of any websites you are having problems with... so that the support engineers can visit and test the web page...
Just saying Facebook is not sufficient as when you say 'pictures' are not displaying...perhaps you mean 'video' pictures... also websites like Facebook have different addresses for different parts of the world.
eg. http://facebook.com.au/ or http://youtube.com.au/nasa
This forum is for questions from System Administrators who manage 100's of computers that use IE with IEAK and GPO.
Regards.
Rob^_^

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

Movies are not playing properly

hi,
i am using hp compac s006tu laptop. and the movies are not playing properly in my laptop. i tried vlc, zoom, and windows media player but it not showing proper quality. so please help me on that. i think there is problem in my video driver so plz send me the video driver.

Please post what GPU you have.

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

My camcorder videos are not capturing properly

Similar Messages

Maybe you are looking for