My camcorder won't play back or record. The tape doesn't move at all.

Solved!
Go to Solution.

boboshaffer,
Repair schematics or instructions for our camcorders are not available for us to provide.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • My mac won't play sound though itunes the timelines doesn't move from 0.00 and there's no sound? help!

     

    Sounds like for some reason it's trying to change to digital output mode. Next time it happens, look at the headphone jack. If you see a red light, it's in digital output mode. This happens from time to time, and you basically just try and put in a pair of headphones or speakers a couple of times until it turns off. If you can't get it to switch back after a dozen or so tries, you should probably take it to an AASP or Apple store, because you're going to need a new logic board.

  • Logic 8 won't play back audio recorded at 48 kHz

    So I was recording a small project in Logic 8 on Snow Leopard (10.6.8) the other day when I noticed that audio recorded at 48 kHz wasn't playing back at all. The wave form appeared in the audio region after recording, but the meters on OUT 1-2 weren't lighting up at all. When I switched the project mode to 44.1 kHz, the audio played back fine (except it sounded pitched down and slow). I was in a hurry so I just recorded the whole project at 44.1 kHz instead, even though it should have been 48 kHz.
    Any ideas on what could be causing this?

    A lot of people have reported this, and it happens to me pretty frequently. Gotta be a known bug, but of course since Apple is always mum about this stuff with absolutely no communication to its customers, we won't know until the next version of Logic is released.

  • Audio won't play back after recording.

    After recording with my BEHRINGER 1204FX though USB, I can see the audio in its track but it won't play the audio until I unplug my 1204 FX and set my input as built in or something else.
    Why can't I listen to my recordings whithout doing this?

    You need to create an aggregate device.
    This link should help:
    http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763

  • How would I play back video recorded on a camcorder on an iPad?

    How would I play back video recorded on a camcorder on an iPad?>

    ToddNashville,
    Thanks for your reply. I want to use the iPad (or another tablet) for it is portable, battery powered, light, etc. I'm taking video and playing back on a ski slop. Can't plug it in or carry it around like a normal video monitor.
    Has no one developed an app and/or connector to provide a video input to the iPad yet? Hard to believe.

  • Video clips won't play back after capture

    I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

    It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
    Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
    I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
    I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

  • PPro CS4 won't play back

    Suddenly video in Premiere Pro CS 4.0.0 for Mac won't play back from source window, program window, or timeline, except for an occasional playback of < 1 second. Scarily this was described by a bunch of users in a thread started two years ago. Only one solution was offered there, which didn't apply to my Mac.
    I was involved in another thread on a related subject in this forum once before but that setup seemed connected to the use of a Dazzle Bridge for capturing. There's no such complication now...it's just not playing any video more than a few frames.
    An editor who can't playback any video is in trouble, and after paying as much as I did for this program and a Mac Pro, it is disheartening. Any ideas out there?

    I appreciate everyone's help but I'm afraid the situation has gone from bad to worse, since Premiere suddenly disappeared.
    Yesterday, following one bit of forum advice, I tried using a separate user account labeled Premiere Pro and the program did play the files--though it wouldn't let me save the project file where it resided. Now, however, the program is nowhere to be found. I have the original installation disk but I have heard of problems arising from reinstallations.
    To answer some other questions, I did try to download the latest update for PPro CS4. I am using PPro for Mac on a Mac Pro with a 10.5.8 OS. I can't say for certain exactly which version I "have" of PPro CS 4 since the update because the program has disappeared and is not turning up in the Finder anywhere, nor can I recall the exact wording of the error message saying I couldn't save my project as edited under the alternate user. The program and system worked fairly problem free for almost four years before the last few days. I use a variety of source footage, including .avi, .mov, .flv, .mp3, .wav.
    One Snow Leopard user has recommended using a Root User account which doesn't seem to apply here. For example, he referred to a "Network Account  User" option that was supposed to appear in Accounts/Login Options but doesn't on my Leopard. Also, as per another user at Trafford College, I revised permissions to select Everyone...however since the program isn't appearing on my computer, there's no telling if that worked.
    Community help is greatly appreciated--especially in light of one forum report of someone who was on the phone with Adobe for hours with this kind of problem but without getting it solved.

  • HDV4 in a .mov file won't play back using any software

    Issue:
    I had 4 DVDs sent to me containing a bunch of .mov files that won't play back in any of the following apps:
    QuickTime 7 Pro (includes Mpeg2 codec from Apple's Web site) - sends me to Apple.com's QT plugins page
    Mpeg Streamclip - loads only some on batch import, but mostly displays white and plays the audio
    HandBrake - Says not a valid source
    VLC Player - error says that HDV4 files cannot be played
    QuickTime Player - says format isn't a format that QT recognizes
    I need to get this into a format usable by FCE.  I'm running the most up-to-date 10.6 Snow Leopard, and the last version of FCE.  How can I do this without losing my current version of iTunes or Final Cut Express?
    Vent:
    As videographers gradually move to hard-drive based cameras, their ability to submit their footage becomes more and more difficult.  As a result, we get DVDs, flash drives, 64 GB memory sticks, and more.  It seems like each one uses a different file format, and every format is proprietary.  Where is a standards committee when you need one?  Where is the open-source format?

    from: http://xkcd.com/927/
    In the words of my favorite engineer: "Standards are wonderful ... and there's so many to chose from"
    -DH

  • MIDI regions won't play back in Logic X

    Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
    - I have done a restart of all my equipment, computer and Logic.
    - Nothing is muted - not the track or the regions.
    - The MIDI in/out in the piano roll is ON.
    - The channel strip setting is set to ON.
    - This applies to all instruments.
    - It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
    - MIDI channel are set to 1 (as seen in the event window).
    - Instrument channel is set to "all".
    Logic X 10.0.2
    OSX 10.8.4
    iMac early 2009
    2.66 GHz Intel Core Duo
    4 GB ram
    SATA disc
    M-Audio Fast Track Pro, with M-Audio Radium 49.
    Does anyone know what could be wrong? Any help is appreciated.
    Thanks!

    See if this is the problem.
    Is this an imported Logic 9 project file?
    Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

  • DVD won't play back in bluray player

    I just created a DVD in DVD SP, about 5 mins long with audio. It plays back beautifully on the computer, but my sony bluray player doesn't recognize it at all. I haven't tried on a standard DVD player, but I don't see how that would help. A previously made DVD plays fine on the player. Any thoughts?
    Thanks
    Shelley

    Dear Shawn,
    Still no good. In a render last night, weirdly, even in my Mac the disk was unreadable and the warning said it was blank, but I rendered again and it works fine on the Mac. But on my SONY player, nothing.
    I changed DVD SP to standard in the Preferences and re-created the project from scratch. I used the DVD: Best Quality 90 minutes setting with no changes. Here is the breakdown:
    Name: MPEG-2 6.2Mbps 2-pass
    Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
    File Extension: m2v
    Estimated size: 2.79 GB/hour of source
    Type: MPEG-2 video elementary stream
              Usage:SD DVD
    Video Encoder
              Format: M2V
              Width and Height: Automatic
              Pixel aspect ratio: Default
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls: Automatically selected: Off
              Start timecode from source
              Aspect ratio: Automatic
                        Selected 16:9
              Field dominance: Automatic
              Average bit rate: 6.2 (Mbps)
              2 Pass VBR enabled
                        Maximum bit rate: 7.7 (Mbps)
              High quality
              Best motion estimation
              Closed GOP Size: 1/2 second, Structure: IBBP
              DVD Studio Pro meta-data enabled
    I am at my wits' end. I have two weeks to get this done for a memorial for my late father so you see my desperation.
    Do you have any possibilities left? I'd go ahead and sign up for the Pro classes at the Apple Store, but in NYC I'm afraid I wouldn't even get to see anyone in time for FCP and its suite.
    Thank you for any advice.
    Shelley

  • Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

    I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

    Does Quicktime Pro also edit .mov files on a PC?
    Date: Wed, 27 Nov 2013 07:53:14 -0800
    From: [email protected]
    To: [email protected]
    Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
        Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
        created by Steve Grisetti in Premiere Elements - View the full discussion
    Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
    If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
    Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.

    have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.
    How do I get to play all of my music that should be stored either on the computer or in the cloud?

    Hi,
    Initially your music should be in your iTunes library on your computer. Once match completes its scan, your music will have been matched or uploaded. I suggest that you add iCloud status column to song view. This will tell you what has been matched, uploaded, purchased, inelligible, duplicate or waiting. What is the status of your tracks that are not playing.
    If space is not an issue, I suggest that you keep the music on the internal hard drive otherwise you can delete the tracks and play from cloud. In both instances, you should maintain a back up of all your music on a separate hard drive.
    Jim

  • I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?

    I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
    [Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
    On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case.  I assume this is related to the problem.
    I can bring up individual tracks on the iPod and see cover art, but cannot play the music.

    iCloud is free, iTunes match is $25 a year.
    I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
    I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
    I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
    I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
    I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.

  • Movie purchased in iTunes won't play. Audio is fine; video doesn't appear.

    Movie purchased in iTunes won't play. Audio is fine; video doesn't appear.

    Wormbog wrote:
    I went back to iTunes but there's no option for me to re-download it.
    Yes there is.
    Go to the iTunes Store on your computer.  Click the "Purchased" link about halfway down on the far right side.  Click the "All" tab on top.  The song is there.  Re-download it.

  • My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

    My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

    Hello Toby135
    Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    -Norm G.

Maybe you are looking for