My camera connection kit stopped working after I upgraded to  ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

Similar Messages

  • Why did my camera connection kit stop working after updating to iOS 6.0.1?

    Camera connection kit stopped working on ios6.01 updated phone. Same camera kit works on the iPhone that I did not update. Why does it not work with 6.0.1?

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • Camera connection kit stopped working after last update

    After the recent update to ios 8.1.3 my Apple Camera connection kit has ceased to work, any one got any ideas why and a possible solution?

    Is this a genuine Apple-made CCK or a third party one?
    Some third party CCKs are not compatible with iOS 8.

  • Camera Connection kit stoped working after a few hours. Now won't comunicate with any device.

    I bought a Camera Connection Kit to connect to a camera and a MIDI keyboard. It worked for about 2 hours just fine. Let sit for 30 min. When I came back, nothing worked. Retured kit to store in exchange for new one. Same problem with new one. ipad shows kit connected but it will not recognize that a camera or a midi keyboard is connected. Ipad still synks with iTunes.

    I have the same problem, but instead of waiting a few hours for the problem to occur, it happens in a few minutes.
    My machine is a MacBook Pro (Retina, 13-inch, Late 2012):
    2,5 GHz Intel Core i5
    8GB 1600 MHz DDR3
    Intel HD Graphics 4000 1024 MB
    I've just reinstalled Yosemite and the problem is still present. Someone have an idea of what is this problem? I use my notebook for work and I need it fixed ASAP!
    Next monday I will take it to an Apple Service and see what they can do.
    Thanks in advance!

  • Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

    Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

    It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
    And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

  • IPad camera connection kit is working on ios 6.1.3 or no?

    Hello everyone,
    I'm trying to find an answer to this question
    Is iPad camera connection kit working on the new update iOS 6.1.3?
    I need to know this kinda urgent now, because my iPad has been acting really weird, but I hadn't update yet, because I'm scared my camera connection kit won't work anymore, and I need it alot because I work with cameras.
    Anyone who already update and the camera connection kit still working? Please
    I have an iPad 2 currently iOS 6
    Have a great day!

    Works on my iPad 2 also. I transfer pics/videos using an SDHC card and also using a USB flash drive.
    To use a flash drive, Plug the  flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • SugarCRM stops working after Leopard upgrade

    My local copy of SugarCRM CE 4.5.1 was working in Tiger before I upgraded to Leopard last week.
    After the upgrade, SugarCRM complains with the following message:
    =====
    Warning: mysqli_connect() \[function.mysqli-connect\]: (HY000/2005): Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1) in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 419
    Warning: mysqli_close() expects parameter 1 to be mysqli, boolean given in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 444
    Could not connect to server localhost:/tmp/mysql.sock as root.Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1)
    =====
    A copy of PHPMyAdmin has not had any problems during the transition from Tiger to Leopard, nor have local copies of WordPress and Drupal.
    Any advice would be appreciated. I'm new to the subtleties of Apache/PHP/MySQL on Leopard, so please be gentle.
    Thanks.

    Thanks for the swift response.
    I'm familiar with the socket location issues with MySQL on Mac OS X. My local copies of WordPress and PHPMyAdmin both work with their configurations pointing to the socket at /tmp/mysql.sock. These installations were working, along with SugarCRM, before the Leopard upgrade. Only SugarCRM has stopped working after the upgrade.
    Is there something I misunderstand about your pointer?
    - O.

  • Camera connection kit not working. After upgrade?

    Camera connection kit used to work perfectly with Nikon D3100. After upgrade it will not work at all neither from the camera usb nor from de card. Help

    Try resetting the iPad. Press & hold the Home and Power buttons together for 10+ seconds , ignoring the red power-off slider until the Apple logo appears.

  • Camera Connect Kit not working with iOS 4.2 software update

    Since updating my iPad software to iOS 4.2 when I try to use my Camera Connect Kit I receive a message saying "Cannot Use Device: the connected USB deivce requires too much power"
    Can any body help me find a way to fix this problem, or even tell me how i can downgrade to the previous software on my iPad as I am sure this is what is causing the problem as my CCK worked fine before I upgraded.
    Thanks,
    Amber-Rose

    One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
    http://support.apple.com/kb/HT4106
    @ rotorcraft:
    It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
    You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

  • Ipad camera connect kit not working

    When I attach my iPod camea connect kit (the Appel one, not 3rd party) to my iPad 3, I get the message that the accessory is not supported.  What gives?  I pop in an SD card and it doesn't read anything.  All I get is the not supported message a few times.

    I have the new iPad also, white 64GIG 4G and my camera connection kit is not working either. The same camera connection kit purchased at my local Apple store worked fine with my iPad 2. I've tried everything (e.g. power-off, reset, restore, putting photos on the card then connecting, and reformatting the card using disk utility) and it even shows the camera connection kit under "general" "about" it just doesnt work as far as being recognized in the photo app. I guess this is where AppleCare phone support comes in handy. I hope this gets fixed because I've been shooting a lot of video and creating some pretty good home movies with my kids using iMovie. I would really like to get these large files transferred onto my Mac. The SD card I'm using is a PNY Professional SDHC 4GIG Class 10 just to provide all the variables I'm working with. What am I missing?

  • Camera connection kit not working the same on IOS 5 as it did on IOS 4. Bugs or deliberate features?

    Using the Camera connection kit Previously downloaded files were recognised and only new pictures were uploaded. Doesn't seem to work in IOS 5. I was using the Ipad as a photos backup and display device.

    I haven't had an issue. Do you use the same card on both devices and it works differently on each one?
    You might try resetting the one that isn't working. Hold down the sleep and home key, past the red power down slider and until you see the silver apple. Let it reboot and see if it works.
    Might, might not help it, but it's a common fix for glitches.

  • Camera connection kit not working iOS 8.3 on iPad 2

    Our camera connection kit is not working with the recent iOS 8.3 update on our iPad 2s. It works fine on iOS 8.2, but once an iPad is updated to iOS 8.3, it no longer can import from that iPad 2. We use this for our HS Digital Journalism class (school news). We import video and photos taken on iPad 2s to an iPad Air through the camera connection kit + lightning adapter. It is not the switch on the adapter because it works fine on iOS 8.2. We cannot use AirDrop because it doesn't work on the iPad 2s.Currently we are just using DropBox, but would l

    I'm surprised this worked at all.  I gather the camera connection kit was intended as input only.
    1) You could try the app...
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11
    works on my iPhone 4 running ios 7.1.2
    There are other of these apps around that work on devices not supported by AirDrop.
    2) You can downgrade to ios 8.2.
    For a limited time Apple will allow you to downgrade to the previous release.  Hurry do not wait. 
    See brownox second post here:
    https://discussions.apple.com/thread/6545455
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/
    see what versions are allowed:
    http://api.ineal.me/tss/status
    see the post by arizonacat and others in this thread.
    https://discussions.apple.com/thread/5337442?tstart=0
    arizonacat points out these sites:
    Provides easy access to Apple firmware files.
    http://www.ipswdownloader.com/
    How to install the ios software.  The install will erase your exiting data. Backup your existing data.
    http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

  • Camera connection kit not working on ipad2 iOS 5.1

    Hi all,
    I have two iPad 2 at home. I bought the camera connection kit few days ago and I'm experiencing some issues on one iPad only. Everything is working fine with the one that has iOS 5.0.1 installed on it. I can copy both, videos and images. But, the other one has iOS 5.1 and the app Photos does'nt read the SD card at all. The thing is that I'm able to that the iPad is recognizing the card reader under Settings/General/About.
    Any ideas what might be wrong? Any other people is experiencing same problem?
    Thanks,

    I haven't had an issue. Do you use the same card on both devices and it works differently on each one?
    You might try resetting the one that isn't working. Hold down the sleep and home key, past the red power down slider and until you see the silver apple. Let it reboot and see if it works.
    Might, might not help it, but it's a common fix for glitches.

  • Ipad 2 IOS 7 Camera Connection Kit Not Working

    I have Ipad 2 and Apple Camera Connection Kit. Since update to IOS 7 it has not worked. I have tried everything suggested on the boards but it still does not work.

    I'm surprised this worked at all.  I gather the camera connection kit was intended as input only.
    1) You could try the app...
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11
    works on my iPhone 4 running ios 7.1.2
    There are other of these apps around that work on devices not supported by AirDrop.
    2) You can downgrade to ios 8.2.
    For a limited time Apple will allow you to downgrade to the previous release.  Hurry do not wait. 
    See brownox second post here:
    https://discussions.apple.com/thread/6545455
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/
    see what versions are allowed:
    http://api.ineal.me/tss/status
    see the post by arizonacat and others in this thread.
    https://discussions.apple.com/thread/5337442?tstart=0
    arizonacat points out these sites:
    Provides easy access to Apple firmware files.
    http://www.ipswdownloader.com/
    How to install the ios software.  The install will erase your exiting data. Backup your existing data.
    http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

  • Camera Connection Kit not Working

    I got my Camera Connection Kit yesterday and i wasnt able to get it to work with my SD Card, it says "USB Device not Supported" when i plug the Card in
    The USB Connector doese nothing when i plug in my Nikon D700 or D300. When i Plug in my CF Card reader there is no light nor a Sign of Activity
    I restarted the Ipad several Times but no change
    Any Suggestions ?

    Are you sure it's seating all the way into the slot? Sometimes the case or cover interferes with it.
    Also, some cameras do not work with the CCK. It has to do with how the camera format's the memory card.

Maybe you are looking for

  • Basic excise duty calculated in duty free deemed export

    Hi Experts, We are facing an issue where system calculates basic excise duty in case of deemed export(duty free) . In some invoices it calculates basic excise duty though it should not calculate as it is duty free. Our scenario is like this:- At sale

  • Changing password when logged on a replica, HELP!

    Hello all, We have an opendirectory master to host a windows domain with some replicas (All 10.5.6). Each replica are setup as a backup domain controller and it works. But we have a VERY BIG ISSUE: If a windows machine connect to the domain through a

  • [Help] Unable to find component with absolute reference

    I've deployed my project files to server and registered in Application. Class Files under myclasses goes to -> /disk2/app/applmgr/comntop/java/ldc/oracle/apps/sla/calnet/xref/phone Page XML under myprojects goes to -> /disk2/app/applmgr/appltop/xx_cu

  • Alias in C folder

    Dear  Gurus,     Please tell me what is function of alias  in c folder.     how it can be use? Ravindra

  • Color correction - matching color from two captures?

    Hi, Shooting inside the same room with the same light, I seem to have got the walls a little more yellow in one of my takes. There is a subject (blue shirt) and a mechanical system (painted blue) with the background an off white paint on a block wall