My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Similar Messages

My front camera will not work after I downloaded the IOS 7.0.4 .. Why is that ?

My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

N97 camera does not work when i open the len cover

I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
but I don't need to reset the phone, just close and open the len cover again, and it works.
Message Edited by walkmancat on 05-Jul-2009 05:52 PM

Trackpoint does not work after switching from the tablet to laptop mode.

I use my tablet to run a smartboard. Sometimes when I switch to the tablet mode and back by reversing the display, the trackpoint and mouse keys stop working. The touchpad below it still works. I am running windows 7. I have gone into the control panel, under mouse, and both the trackpoint and touchpad are still both checked. ?? When I restart the functions return.

Hi Remaxjoe,
Welcome to Lenovo Community Forums!
I’m really sorry to hear that trackpoint is not working properly in your Lenovo system.
I would suggest you to download the Ultranav drivers for your system and install it.
Below is the link to enter downloads page and install the Ultranav driver.
• Support Drivers & Software downloads
Please click on "QUICK PATH”, enter your system model and select the exact model depending on the MTM number of your device.
Spoiler (Highlight to read)
You can refer here for further information.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Web cam does not work (no webcam on the device list to upgrade o to find driver )

Can anyone help i just change the os to win7 64 bit from 32 bit and the webcam doesnt work, i cant even find it on the device list, and when i try to use it says that none webcam are conected, help plz ?

Hi BlackPack,
You probably need to download and reinstall the driver for your Webcam. I checked and it is available for your computer at your computer's website.
Below are the instructions to find and install the driver.
For your computer, the Webcam software is called MediaSmart.
Download New Driver for your Webcam:
If you are having real issues getting your webcam to work, or if you have recently upgraded you Operating System, you may have to reinstall your webcam software.
NOTE: If all else fails and you cannot find a driver for YOUR Operating System, note that sometimes Vista drivers will work on Windows 7; Vista came first - Windows 7 and Vista remain closely related. Just tell your website that you have Vista and see if there is a driver for you under Vista. If even that fails, ask again for assistance and we can look for a driver for you that will work.
Go to the top of the HP forum page to Support and Drivers
Enter your Computer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Look for category Software - Multimedia
Select the appropriate Cyberlink YouCam Software OR MediaSmart Webcam Software – if available for your system
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips:
For those using MediaSmart:
MediaSmart Software Webcam Feature
Bookmark your Website!
Because you just changed your OS, you might want to Bookmark the link to your computer's website so you can check back to it in case you need to pick up other software or drivers at a later time. There is a lot of information at your website: manuals, how-to documents, software and drivers.
Recovery Media for your Operating System!
If you have never done so, be sure you have either created your own or ordered your Operating System Recovery discs from HP! If available, you can check for the Recovery discs at your computer's website under "Order Recovery Media"
Kind Regards,
Dragon-Fur

My macbook air does not work, saying i have no memory, how can i fix it?

The computed showed a message, saying that i have no memory enouth, the day after when i turned it on appeard that beggining messages, then anything else, even the dock. i dont know how can i delete my archives and stuff, somebody can help me?

Does it say hard drive space or application memory? Because if it is application memory then deleting items won't work. You'll have to open up Activity Monitor in Applications > Utilities and sort each process according to memory. Then you will see what is using up all the resources.

Capture streaming does not work after upgrade of the source database.

Hello,
We have a complex system with 2 X RAC databases 10.2.0.4 (source) and 2 X single databases (target) 11.2.0.2
Streaming is running only from source to target.
After upgrading RAC databases to 11.2.0.2 , streaming is working only from one RAC to one single database.
First RAC streaming is flowing to first single database only, and second RAC to second single only.
First source-target is streaming fine, second capture are aborted just after starting with following errors:
Streams CAPTURE CP05 for STREAMS started with pid=159, OS id=21174
Wed Mar 28 10:41:55 2012
Propagation Sender/Receiver (CCA) for Streams Capture and Apply STREAMS with pid=189, OS id=21176 started.
Wed Mar 28 10:43:05 2012
Streams APPLY AP05 for STREAMS started with pid=134, OS id=21696
Wed Mar 28 10:43:06 2012
Streams Apply Reader for STREAMS started AS0G with pid=191 OS id=21709
Wed Mar 28 10:43:06 2012
Streams Apply Server for STREAMS started AS04 with pid=192 OS id=21711
Wed Mar 28 10:43:30 2012
Streams CAPTURE CP05 for STREAMS with pid=159, OS id=21174 is in combined capture and apply mode.
Capture STREAMS is handling 1 applies.
Streams downstream capture STREAMS uses downstream_real_time_mine: TRUE
Starting persistent Logminer Session with sid = 621 for Streams Capture STREAMS
LOGMINER: Parameters summary for session# = 621
LOGMINER: Number of processes = 3, Transaction Chunk Size = 1
LOGMINER: Memory Size = 10M, Checkpoint interval = 1000M
LOGMINER: SpillScn 0, ResetLogScn 7287662065313
LOGMINER: summary for session# = 621
LOGMINER: StartScn: 12620843936763 (0x0b7a.84eb6bfb)
LOGMINER: EndScn: 0
LOGMINER: HighConsumedScn: 12620843936763 (0x0b7a.84eb6bfb)
LOGMINER: session_flag 0x1
LOGMINER: LowCkptScn: 12620843920280 (0x0b7a.84eb2b98)
LOGMINER: HighCkptScn: 12620843920281 (0x0b7a.84eb2b99)
LOGMINER: SkipScn: 12620843920280 (0x0b7a.84eb2b98)
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), reader MS00 pid=198 OS id=22578 sid=1148 started
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), builder MS01 pid=199 OS id=22580 sid=1338 started
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), preparer MS02 pid=200 OS id=22582 sid=1519 started
LOGMINER: Begin mining logfile for session 621 thread 1 sequence 196589, /opt/app/oracle/admin/singledb/stdbyarch/singledb_1_196589_569775692.arc
Errors in file /opt/app/oracle/diag/rdbms/singledb/singledb/trace/singledb_ms00_22578.trc (incident=113693):
ORA-00600: internal error code, arguments: [krvxruts004], [11.2.0.0.0], [10.2.0.4.0], [], [], [], [], [], [], [], [], []
Incident details in: /opt/app/oracle/diag/rdbms/singledb/singledb/incident/incdir_113693/singledb_ms00_22578_i113693.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
krvxerpt: Errors detected in process 198, role reader.
We have 5 streaming processes running.
When we rebuilded one of them, everything works fine, but other are too big for rebuilding.
Has anybody met with such a behaviour ?
Oracle development is already working on it but we need faster solution.
Thanks
Jurrai

wwn wrote:I got this after a former kernel update and I can give you only a typical windows advice: reinstall all the Bumblebeestuff after uninstallation and after a reboot. Sounds strange but worked for me.
What exactly did you reinstall? I am experiencing the same problem.

Too many web sites that I go to do not work with your latest version. How can I use a previous version? Right now, I have to switch to IE because I do not upgrade it until I absolutely have to.

I have to work with a lot of company web sites that are slow to adopt new browser features and expectations. The end result is that when Firefox updates my browser automatically, I frequently find myself broken, and in some cases, simply denied access, for having an "unsupported" browser or browser version. I would like to be able to open a previous version of Firefox, so that I can access that web site. But it appears that when you update, you remove/replace the previous version(s), and I am forced to use another browser.

I am currently using HP Simple Pass version 6.0, and it had been working like a dream until Firefox recently upgraded to v. 30. Now it doesn't work at all :( The current software won't have anymore updates (last one in 2013), because the omnipresent Apple bought Aunthentec (the company that makes (made) Simple Pass) back in 2012. Dear Firefox, please update whatever you have to to make the 2 compatible again, or I won't be able to use Firefox anymore. :(

After uptade to ios5 my camera does not work

after uptade to ios5 my camera does not work

I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!

There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough.

My camera does not work on my ipod touch 4th gen. it just goes to a black screen i have done everything from resetting and rebooting... help :(

I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

Hi.
I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
I have checked the software that I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
But the web cam is not working. Could you help me fix this problem?
Best regards:
JEIO71

I have a pavilion dv6 notepad. it's about a year old.
about a month ago internal webcam truevision hd stop working.
Called hp tech. they sent a box for me to ship the laptop.
they hp tech attempted to correct the problem via internet
did not work.
wanted me to do a restore to factory setting i stopped him there.
Webcam detected in device manager.
the webcam light come on but no image.
I actually see the back drop through the image space.
running windows 7, fully updated.
I found many comments on the web about the webcam connector disconnecting.
But if it was the case with my computer, the webcam would not be detected.
Many other comments suggests to do a restore to factory setting but \i read also that
does not work often.
I read many comments where disappointed clients believe hp should update
the software but the driver is actually microsoft dating back to june 2006.
Is it possible it's a hardware problem, ie webcam is burned out.
I have received a box to sent it and know they will do a system restore.
Don't feel to go that way.
Many comments refers to hp making an effort to get a driver update.
ps I decided to purchase a logitech webcam, works perfectly.
What else can I do to fix this problem.
Can hp send me another internal webcam.

Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

Hi Rogerya,
Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
How to Troubleshoot iSight - Apple Support
https://support.apple.com/en-us/HT2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
- Matt M.

Upgraded to Yosemite and now camera does not work. Please help.

I just bought a new iMac 27" computer today. I brought it home and it told me I needed to update my iOS. So i did.....now my camera does not work. Does anyone know a fix?
Message was edited by: MCO98

Scott SV wrote:
Hi there - I just completed a leopard upgrade. Strangely enough, after installation and the subsequent reboot, i cannot get the finder to work. Upon clicking on the finder it just sits there and gives the 'waiting' signal (rotating multicolor circle). I opened the activity monitor and killed it, clicked again. nothing. Rebooted numerous times.. nothing. I also tried to install the leopard software update. The files download fine but will not install. I assume this has to do with the finder problem. Any ideas on how to fix this? thanks!!
There are really two "Finders," the one in the dock and the one that actually runs the GUI.
When you click on your desktop, you see the Finder menu on the top right. Do any of those functions work?
For example, if you click Go->Home, does the Finder window open as normal?
If so, you may simply have a corrupted Finder alias in your dock.
I would first run DU and perform a disk check and repair permissions.
How to get to DU? Again, if the top right Finder menu works, select Go->Utilities and run DU from there.

My camera does not work after I restored the system, how can I use it again?

Similar Messages

Maybe you are looking for