My camera doesn't work + it doesn't recognize external cameras. what's the problem here?
I set up a new windows 7 version for my laptop (probook 4510s) & the camera doesn't work + it doesn't recognize any external camera. So how to fix my camera & get it back to work?
What kind of external camera is this? I am assuming it is a USB camera? Make sure that you aren't using any USB hubs. Also try connecting it to another USB port. Have you installed the drivers from the camera manufacturer yet?
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?
If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad. -
My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?
There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above. -
I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot the machine, Uninstall and re install the Itune program, stilll the same message pops up.
The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file. -
My built in camera is not working and I cannot find out how to fix the problem
I looked throught he manual but could find no trouble shoot help. it was working fine but now I just get a black box if I use video in say skype or if I use photo booth. Both are set with the built in camera as their preference.
FaceTime
http://support.apple.com/kb/TS4185
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
I know my apple id password. When I try to log into my apple tv, it asks for my apple iTunes store password and when I enter my apple store password, it is rejected. I tried to change my apple iTunes store password to the same as my apple id password and it says I have previously used that password which leads me to believe they are the same but then why does apple tv not accept it?
are you sure it's not asking you for the shared itunes lib password?
the shared itunes lib password is not personal but a password so only the people you wish on the LAN can access your shared lib but still you don't want them to get access to buy stuff using your appleID
so the itunes password is used rather then using the appleID + password combo -
I cannot get any mic to work on this, internal or external. What are the settings?
evidently I must have shanged a setup file, but i am new to macs, an dnt know what i changed or what to change back, It was working fine, I was on a headset, then i played with it, turned the laptop off, when i turned it back on, no voice at all. I can hear things fine, but no mic. What setttings did I screw up?
Check SYSTEM PREFERENCES>SOUND>INPUT
Ciao. -
HT1222 After update on Iphone4 it does't works with sim-card!!! What's the problem?
After update to 5.1.1 (9B206) Iphone 4 show "No Sim-card". What I have to do to solve this problem?
Having same issue with Passbook.. Unable to select anything and when tapping App Store, nothing happens..
Is it just me or can't we remove apps within folders? Seems I have to move the app out of the folder then delete it?? Beat.. -
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
What is the problem when your camera function doesn't work and lags?
What's the problem when the camera function doesnt work and lags? Can my iPod touch be returned because of this? I have done nothing to damage the product.
My file association for jpg files is correct, if i click on a
jpg, ACDSee starts immediately.Although I am a long time Windoze non-user, I vaguely remember that there's a difference between correct file-type association being set and some application starting at a mouse click on a file icon. I also vaguely remember Windoze file-type association mechanism uses a few action-types. Java Desktop should expect a specific action-type for the association. -
I backed up my phone before i went on vacation. I dropped my phone in a pool and now it doesn't work, is there any way that i can get the pictures that I took on vacation off of the phone?
IF you had icloud backups and Camera Roll turned on in Settings on the wet phone, then you can restore that backup to an iOS device, but not a computer.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Once you get a replacement phone...
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
This link gives another overview of backup and restore:
http://support.apple.com/kb/HT4859?viewlocale=en_US&locale=en_US -
during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s
I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.
-
The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance
Also it was not and never has been jailbroken if that helps.
-
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?
aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.
Maybe you are looking for
-
Is it possible to upgrade/add a graphics card to a Pavilion dv7-7000 laptop?
I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card. Mostly I've come acr
-
I have a folder full of small monochrome bitmaps, shapes made up of black contiguous pixels on a white background. Is it possible in JS crop the image to the black shape, in other words, trim the surrounding white? (PhotoShop's trim doesn't work on b
-
I tunes does not recognize i touch after trying to upgrade software
My itouch was working fine until an error occured while trying to upgrade the software. Now, when i plug it in it just shows me a picture telling me to connect to itunes, and i tunes does not recognize my ipod as being connected. i can not get the ip
-
PE7 shuts down when getting media
I am using Premiere Elements 7 since about 3 months (see PC specs at the end). After working decently for a few weeks, PE7 now shuts down everytime I try to Organize -> Get Media -> PC Files and Folders. The program just disappears, no error message.
-
Appel à une fonction de préchargement
Bonjour, J'ai créé une fonction afin de pouvoir l'appeler dans différents clips de mon animation. La fonction permet de charger une image tout en affichant la progression du chargement. Le problème c'est que l'appel à la fonction marche dans la 1re i