My camera is not working. any solution, My camera is not working. any solution
My Back camera stopped working sudenly. My front cam is working but gets hanged up after taking few shots. Plz advice.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Similar Messages
-
Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.
read this and see if it helps: http://support.apple.com/kb/ht2090
-
SD card reader is not working in my MBP early 2011. Is there any solution?
SD card reader is not working in my MBP early 2011. Is there any solution?
on my macbook iphoto didn't recognise my camera or card reader after upgrading to iphoto '11,
Evenutally I went to an application called Image Capture which I seem to have already. This read the camera contents. I selected the images I wanted and then imported them into iphoto which was one of the options given. It worked. God knows why one has to go through two steps. But I'm feeling pretty triumphant. This may help you if you haven't already sorted it. -
Hi there, since I installed Mavericks, when I am having a video conference with Facetime, and I maximize its window, the other person stops seeing me (my camera turns off.
Is this a bug? or do we have any solution to this annoying issue?
Thanks!Hi cpfrances,
Thanks for using Apple Support Communities. This article has some steps you can take to isolate and troubleshoot the issue with your built-in iSight camera:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Cheers,
- Ari -
I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install. And the 5.6 version will not work now either. So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech. Any help will be appreciated.
My iPod is a click wheel...I think that's fifth generation?
I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
I'll try using the USB again. It's laying around here somewhere. Just gotta find it. -
My camera does not work on my macbook, any suggestions to fix it?
my camera does not work on my macbook, any suggestions to fix it?
Here are Applle's troubleshooting steps....
support.apple.com/kb/HT2090 -
SAP audio language not working for *any* channels. Useless tech already came out!
Just got the FIOS service this Friday.
I'm very happy with the internet. Very fast!
The TV, I'm not so happy about.
Having come from AT&T U-Verse, and Time Warner Cable before that, I've gotten used to having the HBO channel lineup (or any premium channels like Showtime/Cinemax/etc) and being able to easily switch between English and Spanish audio. So far, between 6 calls to customer service (each one of them telling me it's possible), and one extremely clueless tech that just left my home after only 5 minutes, I've not been able to do this.
I can SEE the option for SAP! I KNOW HBO offers Spanish audio for its' non-HBO Latino channels. I also know that not all movies have Spanish audio, but the majority of new HBO movies do.
A guy on the phone on Saturday had me convinced that to watch HBO channels with Spanish audio, I had to purchase your Spanish package that comes with extra Spanish channels. I thought this was ridiculous -- since I've already got a PREMIUM package, why in the world would I need to get another package to listen to that premium one in Spanish?! Anyways, I got the package and still no Spanish HBO.
The tech that came and left in 5 minutes changed the channel to HBO Latino and said, "Here, it's working". I pointed out that HBO Latino is not what I meant - none of the other HBO channels have Spanish, althought we could see they said SAP.
What gives, Verizon? This, coupled with the fact that I can't set my main DVR to record a show we're watching on an HD receiver in another room without physically going to the DVR itself (or using a cellphone app!) and that apparently I can only record 1 show on the DVR at a time, has me pining for AT&T... which I never thought would happen.
Hell, even Time Warner Cable's HBO lineup has Spanish.
Sounds to me like your all-fiber network isn't up to snuff on some very basic things.skohly wrote:
Chill man
On your remote push the option button. Then click on audio language and change to spanish. You will be all set
We've been through that appx. 50 times with tech support - not working. Tech guy that came out today said Verizon doesn't offer SAP ... so I don't know what to think now. -
I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?
DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion. -
I have an iPhone 4 and a camera card connector (bought from apple) which worked fine together, then I updated to iOS7 and now when I plug it in it says " This accessory is not supported by this iPhone."
Any suggestions on how to get my certified apple camera connector working with my iPhone again would be greatly appreciated. I really wish I hadn't updated to iOS7....
ThanksYou need to update iTunes to 11.1 on your PC
-
My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?
Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too. -
I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip CouridisiPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece. -
I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?
Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion -
I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8). The software for the Canon Powershot is Ver.37.2. Image browser 6.2 EOS utility 1.1. Any help would be appreciated.
Also if you could tell me what happens to the individual jpegs that get imported through iPhoto, I would go back to using that instead of the Canon software. I want to be able to go into a folder and see all the jpegs and not have to rely on iPhoto's one enormous file. What happens if that iPhoto file gets corrupt? Thanks, LeeshaLeesha wrote:
I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8).
Actually, Microsoft Office 2004 works fine with Snow Lepoard OS 10.6.x. However, it does require Rosetta, Apple's app for Classic apps. In your upgrade from Lepoard 10.5.8, Rosetta may not have installed but you can manually install it with the instructions here.
On another note, when upgrading the OS, some anomalies get resolved by repairing disk permissions with Disk Utility in the Utilities folder.
One more note, there was an issue with Rosetta crashing with OS 10.6.8 in February 2012. Apple released a security update that fixed it. You can see if Software Update (launch from the Apple menu) shows it or manually download Security Update 2012-001 v1.1 and install it. Software Update will also show other applicable apps available for updating for your upgraded system.
Rosetta is no longer available with OS 10.7 Lion and beyond. Then you will need to upgrade MS Office 2011 for Mac.
HTH -
Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?
I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...
Maybe you are looking for
-
How to delete the history in the the field
Dear all, How can we delete the old T-code history in the t-code field that we put t-code under menu?? Please answer Thanks and best regards,
-
How can I select the secondary display in a multiple display setup?
I am using a 2012 Mac mini with Thunderbolt and HDMI video outputs to run the multimedia display at our church. The Thunderbolt port drives a Dell Monitor acting as our primary display. The HDMI output is set as the secondary display and goes into
-
i just got my mini notebook a n310 i keep trying to make a recovery using a flash drive 8 gig but whew i bring up the program and plug in the flash drive i select flash drive and click on create a pop up screen tells me to put in a flash drive with m
-
On a new 10g installation there doesn't appear to be a ctx/samples folder which is required for the default thesaurus. Should we have selected some other option during installation? We can steal one from a 9i installation like the other recent post,
-
Instance methods faster than sync. static methods in threaded env?
consider the following please: (-) i have "lots" of instances of a single Runnable class running concurrently.. (-) each instance uses a common method: "exponential smoothing" and they do a lot of smoothing. so: (option #1): include a "smooth()" inst