My camera is not working when ever i open cam apps its stucks.

After upgrading to iOS7 on IPAD 2 the back camera is not working only get a black screen switing to front camera it works once then freezes

Have you tried to force quit the camera app? Double tap the home button. Scroll sideways if needed until you see the camera preview, then flick that preview up and off the screen. Then either single tap the home button or tap on the home page preview to exit the mode.

Similar Messages

  • My camera will not work when I open the app the screen is blank

    When I turn on the camera app the screen is blank, any suggestions

    Try closing the Camera app completely and see if the camera works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I tunes is not working. when i go to update apps nothing happens go to itunes page is blank

    itunes not working. when i go to update apps nothing happens. if i go to itunes store page is blank and does not go to the store

    http://support.apple.com/kb/ts1567

  • Why is my password not working when i want to update apps?

    Please tell me why my Apple ID is not working when i want to update apps?(just the purchased apps are not working).I now have an acount that dosen't have a card entered.

    For examle i have iGO primo and my password is not working (i already reset it).

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • No matter how many times I reet my password, it will not work when trying to sign intothe App Store through my iPhone4S.

    No matter how many times I reset my password, it will not work when trying to sign intothe App Store through my iPhone4S.

    What is the error that you are seeing? Try to login using another App like GameCenter or iMessage? Also try logging in to other Apps like Facebook to check if it is your Internet connection problem.

  • I have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

    i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

    That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.

  • HT204380 My camera is not working when it is facing me.

    My camera is not working. It is frozen shut in the direction facing me, which also means my FaceTime is not working.

    Try closing the Camera app:
    1. Double-click the Home button to reveal the Task Bar
    2. Hold down the Camera app for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Tap area above Task Bar to return to Home screen
    If the above doesn't solve the problem, do a reset:
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

  • My Camera still not working when i restore twice

    my camera still not working, i had already restore it twice but it's not work. Both of camera are not working. What can i do now??

    Restore as new, do not restore the backup.
    If the issue still exists, take the device to Apple.

  • SP2013: OK button not working when editing Settings on List app

    Hi, all!  Currently running Sharepoint 2013 under Server 2008 R2.  My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11.  I am currently a Domain Admin for our corp domain.
    Long story short, I've created a test List app.  When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app.  No access spinning, no errors on-screen (also none visible when I view
    the source of the SP page or header), no nothing.  The highlight of the button changes as expected, but nothing else.  The Cancel button will Cancel as expected, but OK does nothing whatsoever.
    My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read).  A Check Permissions on myself yield the following:
    Full Control   | Given through the "~site~ Owners" group.  
    Read   | Given through the "~site~ Visitors" group.  
    Edit   | Given through the "~site~ Members" group.  
    (Note: "~site~" is replacing the actual SP2013 site name above)
    I'm thinking it has something to do with effective permissions.  I just added myself to the Owners group this morning with no effect.  I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either.  Suggestions
    are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
    Thanks, guys!
    Steve

    Hi Steve,
    From your description, my understanding is that OK button does not work when you create a new column.
    Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
    Besides, please try to create a new column with steps below:
    1.      
    Click LIST tab in the Ribbon.
    2.      
    Click Create Column in Mange Views section.
    3.      
    Create your column in the dialog.
    4.      
    Click OK button.
    In addition, please confirm these points below:
    1.      
    Test your issue in another list.
    2.      
    Test your issue with another computer.
    3.      
    Test your issue with another account.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Why viber is not working when i am closing the app?

    in my iphone 4 mobile i am facing a problem. when i am closing my apps i am not getting any calls. when i am opening the apps then i am getting calls, sms and miscalls. I am connected with wifi. in this same connection others users are getting calls when they are closing the app. what is my problem? i have uninstalled the app and again i have installed it. but problem remains same. Anyone is not getting me!!!! Please reply as soon as possible.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • N97 camera does not work when i open the len cover

    I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

    it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
    but I don't need to reset the phone, just close and open the len cover again, and it works. 
    Message Edited by walkmancat on 05-Jul-2009 05:52 PM

  • Nokia E7 camera is not working when use the camera...

    Hi . i just bought my nokia e7 just 45 days only . when i on the camera , device completely freeze there is no more process , i have to press the switch off button for few sec to shut, device is working well , but only when i switch on the camera it;s becae freeze. even i have done soft format and also hard formate , even i updated my device through online for  Symbian anna . and also i have tested my camera with additional third party camera applications but at the time also i got negative result. even i restored my camera setting . .. Pls help me ... i dont know what to do 

    zayiah wrote:
    I also have the same problem, when the button on the side is pressed nothing hapens, then accessing it from the menu it comes up with a black screen but the settings are there, when I press the shutter button it says processing image and nothing happens, phone freezes and that's it, the front camera is working but not the back camera. I really need help please.
    Attachments:
    Image0003.jpg ‏22 KB

  • Itunes just asked me to do another update yesterday. But it's still not working. when ever i try to sync music to my ipod touch it keeps saying itunes is not responding and it freezes. Itunes please fix this problem!!!!!:-(

    Itunes still is not working correctly. There was a software update that i received yesterday and i figured it would fix the problem with itunes not responding, but it didn't. It's still doing the same thing. I'm getting kinda annoyed cause i use itunes as my main music player so please help me fix this software issue thanks!

    Hi Batman1981,
    It sounds like you may be describing an issue where a program that monitors the Winsock protocol for Windows is conflicting with iTunes and it's related components. Take a look at the article linked below, it provides suggestions that may resolve the issue.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    You may notice the following symptoms on your Windows PC after installing the iCloud Control Panel, iTunes 10.5 or later, or Safari 5.1 or later:
    iTunes is slow to respond.
    Windows is slow to respond.
    iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
    -Jason

  • My camera is not working when in Skype?

    My camera used to work in skype but now it does not. It works in facetime and photo booth. In skype preferences under video it shows no camera detected, and does not allow me to add one.
    Help please , I can still have a conversation in skype just no video.

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Maybe you are looking for

  • Inserting multiple rows using a single Insert statement without using dual

    Hi all, i am trying to insert multiple rows using a single insert statement like the below one. The below one works fine.. But is there any other change that can be done in the below one without using dual... insert all into ps_hd_samp (num1,num2) va

  • Apple TV sound inquiry

    Hello, I am trying to run my Apple TV through my TV and not getting any sound. I have a Bose sound system, a digital cable box, a TV and Apple TV. They are connected like so: Apple TV-->TV TV-->Cable box Cable box-->Bose system Bose is NOT connected

  • SEVERE: Failed to unlock all EM-related accounts

    while configuring the em dbcontrol I am getting this errror. checked the account status of dbsnmp, sysman and checked the path for perl bin. every thing is ok. spool is as below. pls help out to configure. *$ emca -config dbcontrol db* STARTED EMCA a

  • Business One Profit and Loss Statement Budget Report Subtotals not Working

    We are running Business One 9.0 The Budget profit and loss report appears to be badly written. Rather than having the budget data in the same line as the actual, the report creates extra lines for the budgets AND adds more data to the actuals column.

  • Unknown error: ZipException: invalid entry size (expected 29630 but got 28789 bytes)

    Hi while choosing the workflow from the studio we are getting the following exception.Could any one of u assist us?? Start server side stack trace: java.util.zip.ZipException: invalid entry size (expected 29630 but got 28789 bytes)      at java.util.