My camera is spoilt (help Please)

i bought the creative CARDCAM Value and i managed to use it for the firt time. However, i left the batteries in the camera and it melted. The batteries got stucked but i managed to remove it. I am able to use it when it is connected to the computer but not with the batteries on and when i carry it along. Can someone please help me? Thankyou.

I'd suggest getting in touch with Creative support and explaining this problem ASAP
John

Similar Messages

  • I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos :( Help please - I really need the photos!

    I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos Help please - I really need the photos!

    The camera roll is not part of the sync process at all.
    You should be importing these photos to your computer regularly as you would with any digital camera.  Youc an organize them on your computer and sync the to the iphone if you wish.
    The photos sync from the computer to the iphone is one way.
    The iphone mirrors the selected content of the computer to which it is synced.

  • In Iphoto 11 all 7000 of my photos show the same thumbnail.  I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

    In Iphoto 11 all 7000 of my photos show the same thumbnail.  I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

    Where is your Library stored?

  • Trouble exporting to camera! Need help please

    Hi all, Hope u can help. Only recently has imovies not allowed me to export movies to my camera. The message appears:- "imovie lost connection to the video camera. Please check and try again."
    I have checked firewire which is installed correctly- i know this as i can import stuff fine.
    Only thing i can think of is that i recently installed a lassi hard drive to back up movies- this also uses a firewire cable-At the same time i had extra memory installed, could this be the problem? If so how do i fix it! or could it be something else? Yours hopefully nicola

    Hello Nicola:
    Welcome to the forum!
    You must be sure your hard drive is formatted for the mac. Look at this:
    b Formatting & Partitioning a Hard Drive in OS X - Tiger
    http://www.kenstone.net/fcphomepage/partitioningtiger.html
    b Partitioning a Hard Drive in OS X - Jaguar
    http://www.kenstone.net/fcphomepage/partitioningosx.html
    Also, read this for help with firewire issues.
    Sue

  • Problem importing still photos from digital camera.  Any help please?

    I wanted to put together a little Premier Pro CS5 project using 20 stills from my Sony digital camera.  When I go through the various options to import them
    into my project (Import, Import through Bridge, etc) I get 20 different file names in the Project panel but instead of 20 different photos (as expected) I have 20 copies of the same photograph.
    Wow, that is frustrating.  The closest item in the support logs I could find was this one (see below), but that work around is both over my head and very time consuming.
    http://forums.adobe.com/thread/730233
    I found another discussion along these same lines and it appears that no solution has been found.
    I hope I am not asking too much of my $1,000 software program to say, "Please pull in these 20 pics so I can work with them in the timeline."  I just want to hit import and go.
    I am using a Win7 computer with a Sony camera taking 3 mega-pixel shots.  Again, all looks to be going well (all 20 filenames in project panel are different) but when those files are opened they are all the same picture.
    I've rebooted, opened and close PrPro, tried renaming the pics from the standard dsc123.jpg convention to something else - all to no avail.  I would find it hard to believe that a program this powerful could struggle with such a simple chore - am I doing something incorrect?
    Thank you for any help!
    Stuart

    More info about the issue.  This is also a hit-and-miss error, as once you find a way that will appear to work and you say to yourself, "Finally!  I figured it out!"
    But once you go to the next photo to pull it in and get on with your project you find that you are pulling in multiple copies of the same picture as the one
    you just pulled in.
    This same problem occurs if you attempt to import using the Media Browser, and as an interesting footnote, the Media Browser window has a drop down
    list.  When you click each of your different file names, there it is - the same picture.  I've invested 1.5 hours in attempting to find a work-around by importing, renaming, saving, right-clicking, using context menus - everything my 43 years of computer use can muster - but still no luck.
    The last time that I created a project similar to this (a mix of video and stills) it worked just fine so that is even more of a head-scratcher for me.
    I even went back and re-imported the pics that worked fine into the project that I am struggling with and they came in fine - no duplication.  But vacation pics are the only copies I have and I just need to import these 20 shots and get to work on them.
    I would be willing to let someone get my IP address and connect directly like my IT folks at work do so they could see what is going on with this.
    Thank you again for any assistance!
    Stuart

  • Creative live cam voice help please

    Help please,
    We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
    Regards,
    Arthur

    Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
    If I cannot resolve this, can any one suggest another webcam please.
    Regards,
    Arthur

  • Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

    Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

    Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

  • I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

    I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

    Try Here  >  http://support.apple.com/kb/ts1591

  • My latest import photos are missing from my iphoto library but still on my ipad, how do I get them back into iphotos. I very frustrated because i just imported them from my camera and have not been able to go thru and edit the ones I want. Help please

    I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get time to edit. Someone help please

    -Background-
    My issue, which I resolved and may help you was the following:
    I have an IPAD 3. I took over 5 GB of pictures on a third party camera. The car was full so I imported those pictures to my IPAD 3 and deleted them from the SD card. While on IOS 5.x, the photos on the IPAD were there under last imported.
    Over the last few days, I upgraded to IOS 6. No issues.
    Then, my family wanted to see the pictures from the trip. I went to the IPAD and could not find the photos. It listed 40 photos only. The last imported was there, but listed as empty. When I went into the settings>usage, it listed 5GB + of photos in the photos area. I was confused. I plugged my IPAD into ITUNES, first thinking I would get a backup asap (icloud was full after importing the photos). Then I though I would downgrade to IOS 5.
    Also, itunes listed that I had 40 photos only, but 5GB of OTHER data. I was convinced the data was not lost. When I tried to browse the IPAD 3 using windows browser, the photos where NOT in the DCIM folder, so I was not able to simply "FIND" the photos and copy them to my PC.
    -SOLUTION-
    I downloaded third party software onto my PC called "http://www.i-funbox.com/" I fun box. I had no idea if this would work, but other forums with other issues called out similar products for iphone issues.
    When I installed the program, which was free, and so far free of malware, I started  to explore my IPAD file system.I found my photos, under IPAD>RAW file system>DCIM>100IMPRT.
    -ROOT CAUSE-
    I suspect when I upgraded to IOS 6, apple fails to register the IMPORT folder of photos as such, photos. So the file system in IOS looses sight of what is inside the last imported folder. Essentially removing them from applications such as "Photos". Why windows does not seem them, is beyond me. But the program I found did see them in raw format, and I was able to COPY them to my PC. Then I deleted them from the IPAD, because I had no other way of managing this folder in IPAD, and it was using a lot of space.

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • My new ipod touch 8gb is only registering as a camera.  can someone please help with syncing it with my old nano

    I have a new 8gb Ipod touch and I am trying to sync my old nano onto it.  But, when I am registering the new Ipod touch, it is recognising it as a camera.  Can anyone please help?  Many thanks in anticipation

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist

    my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • Have photoshop cs5 installed on desktop..got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still now working.  Need help, please.

    I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.

    In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run.  Naturally, all later versions support it too.
    Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
    In no case does an Adobe application belong "on your desktop".  The default install location should always be respected and left alone.

  • I purchased a MacBook Pro in fall for College and it came with a $100 card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

    I purchased a MacBook Pro in fall 2011 for College and it came with a $100 "Back to School" card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

    - You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
    Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
    - If y wnat to switch syncing libraries/computer see:
    go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    If all the synced media like music is in the iTunes library of the second computer it is very easy.

Maybe you are looking for

  • Using Flash Technology In The Portal

    I'm looking for suggestions/information on the best practice for getting Flash to operate inside the Aqualogic 6.1 portal. My company's Marketing department has an individual who insists on creating their content in Flash; but we don't really have an

  • How do I cancel my subscription to Adobe Converter? The files converted cannot be saved on my computer.

    I tried the customer service number. It was a third party vendor and they gave me a direct number for ADOBE which was no longer valid in my area. This was abt $95. with tax.

  • Software does not install properly

    I have installed and uninstalled 3 or 4 times. Booted and rebooted several times. The installer places a shortcut for some program on my desktop. Nothing happens when I click on that shortcut. The printer prints and scan to computer works. What  prog

  • Trouble with date variables

    I have an Oracle Source database and a SQL Server Target database. I need to do the following: 1. Get Max Date from target SQL Server table and assign to a variable 2. Get Max Date from source Oracle table and assign to a variable 3. Create a filter

  • Change User Function Name

    Hi all, I'm trying to create menus & responsibilities using data loader so that I don't need to recreate it manually but data loader crashed because some of the user function name are the same. For example, open Sysadmin -> Application -> Menu -> AP_