My camera is supported, but not listed in Camera Raw

I have the latest updates for Lightroom (4.3) Photoshop (13.1.2) and Camera Raw (7.3).
My Fujifilm FinePix HS30EXR is listed as one of supported cameras; however, I can't see it in Lightroom develop mode nor in CameraRaw plugin in Photoshop. They show only support for X-100 for RAF format (also when convertedto DNG), but nothing for JPG. Adobe Lens Profile Downloader doesn't have my cam eighter.
Any ideas?

I just tried searching this forum, but only found one reference (OP was deejjjaaaa, re. noise banding). If anyone could find more official info, I'd appreciate it.
I have lots of photos taken with a Lumix GF2. I always assumed the lack of lens profiles was a result of unpopularity. I even found a couple of 3rd party profiles with the profile downloader to reinforce this assumption. So now, I learn that correction *might* already be built in, but there is no official documentation I am aware of.
How do I know which cameras are auto-corrected—is there a list? What is corrected—is it just distortion, or is vignette fixed too? And which lenses?
Edit: I have since found this http://forums.adobe.com/thread/785884 using Google. Still not found any lists, but Eric does say " Lightroom 2.4 and later automatically apply geometric distortion and lateral CA lens compensations for all Panasonic models with the .RW2 raw format (since LX3, fall of 2008)." And by Lr 2.4, I assume Cr 5.4 is implied.
Edit 2: After limited testing, it seems that there's subtle differences between the built-in and 3rd party profile distortion correction, some good some bad, which I suppose is to be expected with the supplied wide angle lens. One observation which probably added to my original confusion is that there seems to be no built-in vignette correction. I am now trying out my photos with Lens profile corrections enabled, but with 0% distortion correction and 100% vignette correction. So far so good.

Similar Messages

Release is certified, but not listed in windows store

Hi
I updated my app and it was approved and certified on the 12/2/2015. I had a email with a link
http://apps.microsoft.com/windows/app/islide/51ebbb45-ff17-4c4c-80fe-f9abef20f05b
to my app but when I click on this, my app has been removed. On the dashboard it says my app has admin suspended next to it and a notification Release is certified, but not listed in windows store.
I have tried the support pages but I cannot see where I can submit a support ticket and all the links pages cannot be displayed?
How can I get my app listed on the store?
Many thanks.

Hello,
Please use the following to
contact support. We will be happy to review this for you.
Thanks,
Jonathan
Windows and Windows Phone Dev Center Support
Office Store Developer Support
Send us your feedback about the Windows Platform

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

Why do pictures I took on my iPad show up in photo stream but not the iPad camera roll?

Why do pictures I took on my iPad show up in photo stream but not the iPad camera roll?

The developers may not have made a version compatible with Mac OS X; if they have, it is a separate download.
(76462)

Sony SR100 Camera support but not detected!!!???

The first time I started iMovie 08 I don't recall what I did, it just worked and importing video from my Sony SR100 worked perfect. That was the fist and last time.
No matter what I try now it will not see the camera. Only iphoto sees it as "noname" and will let me import photos only.
If you are thinking this new version will work with Sony, forget it. I've spent hours trying to figure it out and nothing found.

just an update. I found that if the camera is on before starting imovie it will detect is and let you import however imove crashes all the time before it is finished.
Bugs bugs bugs ..... save your money.

Recognized in iTunes, but not as a camera in "My Computer"

I have a PC, running Windows Vista Home Premium (64 bit) SP1.
When I plug in my iPhone 3GS, it shows up in iTunes just fine. But I want to copy some pictures to my computer. It used to show up as a drive (with subfolders and files) but not anymore. What do I need to do?

Reinstall Apple Mobile Device USB Driver:
1. Attach your iPhone
2. Open Device Manager: Right click on My Computer and select Properties from the drop down menu. This will open System Properties. System Properties opens on the General tab so you will need to click on the Hardware tab.
3. Remove iPhone USB Driver called Apple Mobile Device USB Driver. We want to remove this driver by expanding the list of USB drivers which can be done by clicking the + next to Universal Serial Bus controllers. Now right click on Apple Mobile Device USB Driver and select Uninstall from the drop down menu. Click the OK button on the pop up confirmation window.
Confirm Device Removal: Apple Mobile Device USB Driver
4. Reinstall iPhone Driver:Once the driver has been removed you should unplug the iPhone from the USB cable. To reinstall the iPhone USB driver plug it back into the USB cable and the reinstalling of the driver will start automatically. Once you see the pop up message confirming that your new device is ready to use everything should be working properly again.
5. Verify iPhone Camera Detected: Open My Computer now to verify that the iPhone is displayed and you can click on it as you previously were able to do.
Another way you can verify the driver is reinstalled properly is to open Device Manager and expand Imaging Devices. You should now see “Apple iPhone” displayed.

BB Messenger installed but not listed as installed

I have installed the Blackberry messenger on my Bold 9000. It's fully functional.
I have 4 small icons now, indicating that I have new messages, but I can't find any new once.
Looking into this matter I found that in my Application Center, the BB Messenger is listed as "not installed" even though I installed it. Re-install also hasn't helped.
i cannot delete it as "delete" is not listed in the menu. I'm also not able to see the application using teh Desktop Manager.
so my question are:
1) How can I find out what are the 4 icons indicating?
2) How can de-install my messenger now to just start from scratch?
Thank you so much for your help.
Regards,
fgreber

fgreber wrote:
If you don't find it, look at Options > Advanced > Applications. Do you see BlackBerry Messenger installed?
No it's not listed.
Ok, then it is NOT installed, you will need to install BBMessenger.
The notification icons you are seeing might be from another application.
Could you do a screen shot of your device with those icons and let's see?
How to post a screenshot of your BlackBerry
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Computor only registering camera attached. Ipod not listed in itunes.

Computor only registering camera attached. Ipod is not listed in my itunes account

See Here > http://support.apple.com/kb/TS1538

I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
But not using the photos ap..which is where the photos are. Any help would be appreciated.!

In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

WDJ application deployed but not listed

Hi experts,
we've upgraded our AS Java running the Portal and a custom WDJ application from NW7.02 to NW7.40
I expected some problems with the custom application but not the kind we've ran into. We did not do any recompilation of any kind just to see what would happen. The application actually deploys fine according to the logs (both from telnet as well as from NWDS) but it's nowhere to be found. I've deployed both the .ear as well as the generated .SDA file. In both cases the deployement log show "Success".
I can see the application in the telnet LIST_APP command (status: started) but it doesn't show in the list of the WDJ applications in the WD Content Administration, nor in the Portal Content section for WDJ applications.
Any ideas what could have happened?
Much obliged
Marcel Rabe

i think you are wasting time.
if the app is not migrated how you can expect it to be working....

Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

App. automatically launches, but not listed in accounts/startup items

I have a pesky application which automatically launches on start-up, yet it's not listed in accounts/startup items. It's called Microtek scanner finder. I seem to remember it started doing it when I originally got the scanner and installed software, and although it's always niggled I didn't mind when I was using the scanner. However, I'm not using the scanner anymore so want to be rid of it in my dock. Where the heck is it coming from? I don't want to chuck all the software as there may be an occasion where I need to scan a transparency, when I'll need to get the old scanner down from the loft... any ideas? It definitely launches as there is a little black triangle beneath the icon in the dock. If I quit it, it disappears but is back there again on another start-up grrrrr.

Hi, Kathykate. I have a similar Epson Scanner Monitor application that starts up each time I restart my computer. (Mine does appear in Sys Prefs > Accounts > my account > Startup Items, so I could delete it from there if I wanted to.) It runs all the time in the background, using a tiny amount of CPU and memory, and it has no user interface at all: If I quit it, nothing visibly changes, and if I open it again, there's no visible sign that it's open (including no icon in the dock for it). Its only function is to detect my Epson Scanner when I plug it in and turn it on. I ignore it the rest of the time, because whether it's running or not has no impact whatsoever on anything I do. I suggest that you take the same attitude toward your Microtek app.

My computer keeps restarting from a problem but not listed

My computer keeps stalling and automatically restarting. It says there a problem and it will restart. I don't know what the problem is, but it's happening often. I'm running Norton on it again. Has anyone had similar issues?

Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Control Panel shows Flash Player icon but not listed in Programs and Features

Several sites such as Hulu.com and my university homework page keep telling me that I require Flash Player 10 or higher and to download and install before continuing. So when I try, this is the message I get: Flash Player is pre-installed with Internet Explorer in Windows 8. And then in the box below, it says: Flash Player is disabled. I've tried all of the steps to correct this issue, but nothing is working for me. Also the control panel shows the Flash Player icon, but when I go into the programs and features, Flash Player is not listed at all. What am I doing wrong??
OS WINDOWS 8 and IE 8

Hi,
Microsoft embeds Flash Player in Internet Explorer on Windows 8.x so you won't see a separate item in Programs and Features for Flash Player ActiveX (the version used by IE). If you install Flash Player Plug-in for non-IE browsers it'll create an entry in Programs and Features.
Since you didn't specify which troubleshooting steps you've taken, have you tried the ones listed here Flash Player Issues | Windows 8? Also, when you go to this page, Adobe - Flash Player do you see the Flash animation at the top of the page? If so, what version is detected as being installed in the 'Version Information' widget? The latest Flash Player version for IE is 15.0.0.167. If that's not the version listed, please run Windows Update to get the latest version of Internet Explorer or use the link at the bottom of the Flash Player Issues | Windows 8 page.
Maria

LR3 camera profiles loaded but not showing in develop

I checked in - documents and settings\all users\application date\adobe\camera raw\camera profiles and Nikon D700 and many more seem to be loaded. However these do not show up in camera profiles in "develop". Anybody any idea why not ?

Hi Beat. I am shooting with a D700 in raw. In the develop area of LR3 and under "calibration" there is "profile: ". In the drop down menu I currently see ACR 4.6 / Adobe standard/ Camera D2X mode 1,2 and 3. It also incudes Camera landscape neutral / portrait / standard / vivid. I normaly use Camera standard as this gives me about what I want, but I have only had LR3 for a couple of weeks now and am experimenting.
If you go into the Adobe LR3 programme under documents and settings and get to camera profiles you see two options under "camera profiles" -- ADOBE STANDARD / CAMERA
CAMERA is from Adobe shipped with LR3 which has 61 cameras showing which are Canon/ Nikon (to include D700) / Pentax and Leica.
IF as you say LR3 knows I am shooting with a D700, why does the camera profile for D700 not show in LR3 in develop and in the area stated in my first line above, or am I misunderstanding somethig here ?
All the best Alan
London UK.

My camera is supported, but not listed in Camera Raw

Similar Messages

Maybe you are looking for