My camera is working but does not work on skype how do I turn the camera on for Skype
My camer is working but does not work on skype how do I turn the camera on.
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4
Similar Messages
-
Camera App opens but does not work.
I can open the camera App but the screen only displays the close shutter. I can hear the screen react when I press the camera icon at the bottom of the shutter screen but nothing happens. I can go to the "Camera Roll" from the shutter screen and back with no change. The iPhone was recently update with 3.1.3 version but it has been a long time since I had used the camera function so I can't say that it was working before that. The only other thing I did recently was to sync my contacts with my goggle account.
nullThe completion of a reset can take time. You were correct in holding the buttons until you saw the Apple logo and ignoring the slide to power off. The reset is similar to one on a computer and can take a few minutes to reboot the system and come back to life. It will normally correct a number of problems.
-
My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?
There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine. -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
My iphone 4s is factory unlocked purchased in the U.S., but does not work in carriers of Brazil
I bought my iphone 4s unlocked factory from U.S., but does not work in carriers of Brazil.
Displays the following message:
Only compatible SIM cards from a supported carrier may be used to active iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.
What can I do?
Thanks.Return your phone for a refund, because you did NOT purchase an officially unlocked iPhone 4S. There are no officially unlocked iPhone 4S's being sold, in the US, anywhere but Apple's online store. If you didn't get your phone through Apple's online store in the US, it is NOT officially unlocked.
-
My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?
lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
PThanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated. -
Java bean, works in Integration Engine but does not work in Adapter Engine.
In connection to the following thread:
PayloadZipBean - variable filename inside the archive
I am trying to use the same bean.
However I can see, that the bean is working correctly when I use Integration Engine.
But if I am using ICo (AAE) and using the same bean in the receiver, I can see, that the bean gets called but does not work correctly.
The audit log added to my bean shows, that the bean could read the filename correctly from the Dyanic Config in the message, but it cannot write the same into the message.
Could you please help on this?Your above posted system details show multiple Java Console extensions.
You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension, you do not need them to run Java applets.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
Disable the Java Quick Starter extension: Tools -> Addons -> Extensions
Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
You can try a direct connection: <br />
Control Panel > Java > General tab > "Network Settings...": "Direct Connection" (enable) -
Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0
I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp
Anyone going to tell me how to do this uninstalling and installing??????????
I don't want to mess things up even more! Geez--I'm almost 60 years old,
need to work and this might be costing me a job. I'm not 20 and text and
e-mail etc every day. I'm just asking for a little help that as I see it ,
is due to a "glitch" with Adobe's software. They can easily in their
technological minds put a warning on anything before someone downloads
anything such as "If you download this and you have already downloaded
that,, then it won't work." How tough would that be??? They, like most other
major corporations, are in it for the money. What has happened to customer
service???
I need a step by step with my hand held and so it won't screw up things even
MORE. Adobe...get your customer service and your software together...This is
draining. I may lose a job over it. I need to have my computer running well
at this point in time as there is no extra time to spend dealing with
software issue that are a result of Adobe's software incompatibility.
I was on the phone for TWO hours last night telling people exactly what was
going on. I even read the error message word for word. No one would help me
unless I coughed up the money that I don't have...and in addition I will
lose a job that might get me some money. This is why I am so upset. Why is
dealing with Adobe always so difficult??? Of course, I am upset. I'm
actually a lovely person. It is just that this stuff rattles my nerves.
Especially when there is a jobwith a raiseinvolved that I may lose as a
result.
Now I had better get dressed and ready for the job I have now before I am
late for work and lose that job, too..... -
I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?
You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
I am trying to trigger a custom event using a program but does not work ..
HI ....i am trying to trigger a custom event of a custom object type using a program but does not work. If trigger the same event using SWUE it works.
below is the code...
{Key = '0010001115'. "Sales Order Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'ZXXXXXXXF'
objkey = KEY
event = 'ZEVENT'
CREATOR = ' '
TAKE_WORKITEM_REQUESTER = ' '
START_WITH_DELAY = ' '
START_RECFB_SYNCHRON = ' '
NO_COMMIT_FOR_QUEUE = ' '
DEBUG_FLAG = ' '
NO_LOGGING = ' '
IDENT =
IMPORTING
EVENT_ID =
RECEIVER_COUNT =
TABLES
EVENT_CONTAINER =
EXCEPTIONS
OBJTYPE_NOT_FOUND = 1
OTHERS = 2}
Please guide me if i am missing something.Hi Sunny,
I think you should try creating the event using FM SAP_WAPI_CREATE_EVENT.
CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
EXPORTING
OBJECT_TYPE = 'ZXXXXXXXF'
OBJECT_KEY = key
EVENT = 'ZEVENT'
* COMMIT_WORK = 'X'
* EVENT_LANGUAGE = SY-LANGU
* LANGUAGE = SY-LANGU
* USER = SY-UNAME
* IFS_XML_CONTAINER =
IMPORTING
RETURN_CODE = rcode
EVENT_ID = event_id
* TABLES
* INPUT_CONTAINER =
* MESSAGE_LINES =
* MESSAGE_STRUCT =
Regards,
Saumya -
I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?
The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.
-
My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?
Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden -
Moved 8.1 - Nodemanager starts but does not work... SSL problem..
Hello!
We moved our weblogic 8.1 installation to a new production machine (which used to be very easy with weblogic 5.1) but of course, it didn't work because of the SSL demo certificates which were tied to the old server name. It dumped the following line on the log and refused to work:
...Certificate chain received from localhost - 127.0.0.1 failed hostname verification check
We changed our demo certificates as stated in the documentation (certgen, keytool...) and now it starts ok but does not work either. Now we are seeing the following expection on the logs:
weblogic.nodemanager.NodeManagerException: [SecureCommandInvoker: Could not create SSL Socket Factory, reason - java.lang.NullPointerException]
at weblogic.nodemanager.client.SecureCommandInvoker.init(SecureCommandInvoker.java:67)
at weblogic.nodemanager.client.CommandInvoker.invoke(CommandInvoker.java:89)
at weblogic.nodemanager.client.NodeManagerClient.executeCommand(NodeManagerClient.java:161)
at weblogic.nodemanager.client.NodeManagerExecuteRequest.execute(NodeManagerRuntime.java:1605)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
No Exception Messages
Any clue or idea?
Thanks in advance!
Bernardo RiveiraI have seen this myself moving domains to a different server. The way I got around it was to set the Hostname Verification for the admin and managed servers to None. This is done via the admin console, SSL tab, Advanced.
Maybe you are looking for
-
Can not Start Oracle Application Server ORB process
I have just installed Oracle Application Server (OAS) on my machine running Windows NT 4.0 Workstation. When I logon to the OAS manager and tried to start ORB, I got below error message: Please wait while the command is being processed on host ssoh_x
-
Dear Experts, I using BPC 7.0NW. After adding the comments where comments are actually stored ? In 5.1 we have comments tables. And wht will be the performance if i use more comments and wht is the lenght limit for comments? Please help.. Thanks alot
-
Why is the serial number being rejected when I know it is correct. Is because I cannot load onto a second computer?
-
Macbook Pro 15" i7 not a good gaming computer?
I was told that the MBP 15" i7 wasn't good for gaming..Is this true? I thought that it was pretty good for gaming. I'm not talking about intense gaming. Just maybe some NFS or like a couple of MMORPG's. Any input on this?
-
Preventing Inner content of gridview collapse while opening a pop-up window
Hello, I am trying to print the contents of a gridview using a pop-up window by window.open(). I am using javascript to show the expand and collapse effect for the content of each gridview which is also a gridview. But when I try to print the content