My camera on Iphone 5 don´t work after dowloading iOS7.1.1

I download the latest update which is 7.1.1 after that I can't use my back side camera anymore.I'm using iphone 5 and I don't know what should I do.Please help.

Basics from the manual are restart, reset, restore from backup, restore as new.

Similar Messages

  • The front camera of my iPad 3 doesnt work after updated  ios7

    The front camera of my iPad 3 doesnt work after updated  ios7

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If neither fix it then you could try contacting Apple.

  • Cameras on iphone 4 aren't working after updating to ios6

    I updated my iPhone 4 to iOS 6 right after it was released.
    I haven't used my camera until today. However, I can't use either of my cameras on iphone.I tried to take a photo but the shutter wouldn't open.
    When I change to video capturing, shutter opens but camera it's just a black screen. When I start recording, shutter closes and opens.
    Flash also isn't responding on camera (working on different app where its used as a flashlight)
    I downloaded application which uses camera, image is black.
    I don't think it's hardware problem for I didn't drop my iphone or anything like that, but am unsure now...
    I tried restoring, it didn't work...
    Any ideas?
    Thanks in advance, Mirac7

    So  I went to the apple store today since I was having the same problems, they reset it back to factory settings.  Plugged in Iphone to laptop and the same two options came up: 1. set as new Iphone or 2. restore.    So I restored thinking it would then synch...nope.
    They told me if I didn't work to bring back my Iphone and laptop, it might be a problem with Itunes. 

  • What to do if iPhone apps don't work after syncing with iTunes

    Just wanting to share this with anyone who may have the same problem.
    This is what I did: All I did was authorised my computer to transfer apps into my iTunes.
    This may also help (depending on the cause of the problem)
    http://www.iphonealley.com/tips/how-to-fix-broken-or-crashing-iphone-apps
    (Thanks to Jim for sending this link but apparently my solution was a much simpler one)
    Hope this helps! Cheerios!

    Try this - worked for me:
    on the iPhone, go Settings-->General-->Restricitons and either turn all Restrictions off OR if they are on make sure 'Installing Apps' is ON.

  • Hi i have iPhone 4S and some of the apps i've bought or downloade for free don't work after the last update iOS 6.0.1.Can you tell me why?

    I have iPhone 4S and some of the apps I've bought don't work after
    the last update iOS 6.0.1
    Can you tell me the reason?

    most likely the app developer havent made it compatible

  • Bluetooth Iphone 4 don't work with other device?

    Bluetooth Iphone 4 don't work with other device?

    Could be a problem with the contacts on your iPhone's connector.  Try cleaning the contacts using compressed dry compressed air, blowing on the contacts using your mouth being carefully not to spit, or using a very soft dry brush.

  • IPhone 3GS apps don't work after 4.3 upgrade

    Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

    I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • Internet Don't work after the last IOS Upgrade. What can I do?

    Internet Don't work after the last IOS Upgrade. What can I do?

    Can you give us more details?
    Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
    Can you go online by using the Mobile Network?
    Any error messages given?
    Problem with your router?
    See these articles for help with Wi-Fi issues:
    Issues with Wi-Fi networks and connection
    Wi-Fi or Bluetooth settings grayed our or dim
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

    Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)  --not able to use the Beats Speakers. Any software updates I need to install?
    This question was solved.
    View Solution.

    Hi Jim,
    You're welcome
    Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
    There is an alternative IDT Audio driver you may wish to try on the following link.
    http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
    Let me know if you get the same error with this version.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Buit in ethernet don't work after installing Lion

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
    Someone else has the same problem?
    On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
    Is there somebody who has te same problem and has a solution?

    Something does look odd to me unless it's a typo in your post.
    This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
    I work with a modem with te folowing preverences:
    Wan IP address    87.211.205.210
    Lan IP address     192.168.1.1
    Primery DNS server       62.58.50.5
    Secondary DNS server   62.58.50.6
    and a separate router Netgear WGT624v3
    This is not exactly what I would expect from System Preferences/Network
    the system preferences for the network are
    Configure       by DHCP
    IP address     192.168.1.15
    Subnetmask  255.255.255.0
    Router           192.168.5.1  <<<<<<<<<<< this should be 192.168.1.1??????
    DNS              208.67.222.222
                         208.67.220.220
    The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
    If this is not a type then this is a problem!
    Not sure how it got to be that way.
    Does it persist when resetting the modemand router?/
    Steve

Maybe you are looking for

  • Subsequent adjestment problem

    Dear friend I need to do mvt type 121,but when i am going to make this transaction with tcode MB04,error is that :no suitable matrl found in PO.problem is that PO_item category is standard.pl give solution to consum SC stock.. thanks  in advance... M

  • Abt ale and idocs

    hi gurus     how can i specify the mode port packet  size and all these things in partner profile. with thanks aru.

  • IPod Touch and Disk Usage...

    Hi, can an iPod Touch be used as an external HD like my Classic? There's no iPod Touch icon on my Desktop whenever I plugged it in... Thanks.

  • DNG files not visible in Lightroom 2.5

    I've installled Lightroom 2.5 in my old desktop (Pentium 4, 1 GB RAM, Windows XP Home SP 3). After I've imported my camera RAW (NEF) images into Lightroom as DNG, I can see the photo info but photos are not visible.How can I make them visible?

  • Dhanunjai

    I forgotten the sqlplus username and passsword .please send mee how to find my username and password