My camera on my iphone4s wont work
my front camera on my iphone 4s will not work. Help
Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
Similar Messages
-
Camera flash and Flashlight wont work. Reboot doesn't help.
Camera flash and Flashlight will not work. Reboot and battery pull were both tried..as was force stop and clearing data.. no help. Couldn't find any other ideas on Google... Any suggestions?
Do you use the hotspot? If active, the flash will not work
-
whenever i try to connect my many cam to any flash player cam
thing the menu comes up asking me to allow or deny but when i click
on either it doesnt close or anything. this continues if i try to
do it again. I have it configured with many cam and all the
settings seem to be ok. any ideas?
Thanks.Please check the flash player version. It should be latest one
http://helpx.adobe.com/flash-player.html
Did you check with different browser? -
My ipad 4 front camera wont work
My front camera just turns into shutter screen and wont open.
I tried to turn off and on the ipad, but when i use the front camera. It still wont work.
What should i do? Please help... Thanks in advnceIf you successfully restored (went through all steps without error) to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model
Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
Hello Aaron1658,
It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Updated iphone to iso6 and now camera wont work, any suggestions
updated iphone to the new software, and now my camera wont work. When you click on it it stays blank.
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Ive had this computer for about 6 months now and after enjoying using photo booth and a working camera for 4 months it wont work any more. Every time I open photo booth it says that the camera is either unconnected (unlikely) or its in use by another application. When i check to make sure that all other application are closed i still says the same thing. I've created new accounts on my computer to see if it will work but of course it dosen't. Is there any thing i can do to fix this? Or is it pretty much done for? Please help! thanks
Hello glamette
You've received some good advice above. At this point, if your problem remains, you can use the suggestions in Apple's How to Troubleshoot iSight to see if the iSight itself might be the problem. If so, you will need service by an Apple professional.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight -
iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.
Hey Angus97,
These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh -
my camera app wont work on my ipad2. i open the app ant the shutter stays closed. i am on ios 5 if that matters. help?
thx
-arose369First, double tap the home key and close off any apps that are in the task bar. You are really looking for an earlier instance of camera or photobooth that is still there. Then reboot the pad. Hold the sleep and home buttons until the apple logo appears. Ignore the red slider.
Then try the app again.
This has been happening off and on well before ios 5. -
New digital camera wont work on this computer
I have bought a new digital camera, but it wont work on this computer, it claims to be compatable, help!!
Sorry but I think nobody will be able to help you without any further details.
Check the user manual of this cam! Go through all the points!!!
Check if the driver is necessary and if could be updated!!
At the moment this is everything what I can say! -
My iphone4 screen wont work is there a way i can upgrade it ?or get a new one?
my iphone screen went black. Is there a way i can upgrade it?or can i pay money to get a new on ?also my lock button wont work either!? PLEASE HELP!i need to fix it as soon as posible [also need to know were i can replace it]
Find an Apple Authorized Service Provider
-
I just want my phone to work and I do not understand why it wont charge and why it wont work without the charger.
Hi tbolibruch,
Thank you for using Apple Support Communities.
In order to troubleshoot this issue where your iPhone will not power on without the charger, please follow the steps below.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
Cheers,
Alex H. -
Mail-form from dB Masters + reCaptcha - Things wont work the way i want.
I used a mail-form from dB Masters because someone here gave me the tip.
And its great! But it uses a simplefied Captcha script.
I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php
If you try to send mail it wont work.....
form.php
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Email Form</title>
</head>
<body>
<center>
<form id="form" method="post" action="../formmailer.php" enctype="multipart/form-data">
<input type="hidden" name="action" value="verify">
<table cellpadding="4">
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Uw naam:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Naam" value=""/>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Email:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Email" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Telefoonnummer:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Telefoonnummer" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Onderwerp:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<select name="Onderwerp">
<option value="0">Algemene Informatie</option>
<option value="1">Offerte</option>
<option value="2">Overige</option>
</select>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Bericht:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<textarea name="Bericht" rows="7" cols="40"></textarea>
</td></tr>
<tr><td align=right>CAPTCHA TXT</td>
<td align="left">
<form method="post" action="verify.php">
<?php
require_once('recaptchalib.php');
$publickey = "I hide the key on this forum dont know if its ok to show";
echo recaptcha_get_html($publickey);
?>
</form>
</td>
</tr>
<tr><td></td><td align="left">
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="Reset" value="Clear Form" />
<input type="hidden" name="config" value="0" />
<input type="hidden" name="nospam" value="" />
</td></tr>
</table>
<div style="height:1px; display: none; visibility: hidden;">
<input type="text" name="email">
</div>
</form>
</center>
</body>
</html>
formmailer.php
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="www.wientjesvoegwerk.nl";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Onderwerp van de Email";
$reply_to_field[0]="Email";
$reply_to_name[0]="Naam";
$required_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="Er is een bericht gestuurd vanuit Wientjesvoegwerk.nl:";
$mail_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="yes";
$copy_format[0]="vert_table";
$copy_fields[0]="Naam,Onderwerp,Bericht";
$copy_attachment_fields[0]="";
$copy_subject[0]="Kopie van uw bericht naar Wientjesvoegwerk.nl";
$copy_intro[0]="Dank u voor uw bericht!<br />Om veiligheidsredenen is uw email adres en telefoonnummer niet in deze mail te zien.<br /> Het volgende is verstuurd;";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Ga a.u.b. terug naar de vorige pagina om alle benodigde velden in te vullen.";
$thanks_page_title[0]="Bericht verzonden.";
$thanks_page_text[0]="Dank u voor uw bericht!";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Bericht,Naam,Email,Telefoonnummer,Onderwerp";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Bericht";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="bait";
$character_scan[1]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a-z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
$user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
$user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$arrayvalue=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
if($count > 1){$value.=", ";}
$value.=$part_value;
$count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
$message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars($cur_value);
else
$curvalue=$cur_value;
$message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
$message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
$message=buildHorzTable($fields, $intro, $to, $send_ip);
else
$message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
$ref_check=preg_split('/,/',$referring_domains);
$ref_run=sizeof($ref_check);
$referer=$_SERVER['HTTP_REFERER'];
$domain_chk="no";
for($i=0;$i<$ref_run;$i++)
$cur_domain=$ref_check[$i];
if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
$domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
$error_message="";
if($debug==1)
$error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
$req_check=preg_split('/,/',$text_fields);
$req_run=sizeof($req_check);
for($i=0;$i<$req_run;$i++)
$cur_field_name=$req_check[$i];
$cur_field=$_POST[$cur_field_name];
if($cur_field=="")
$error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
$email_check=preg_split('/,/',$email_fields);
$email_run=sizeof($email_check);
for($i=0;$i<$email_run;$i++)
$cur_email_name=$email_check[$i];
$cur_email=$_POST[$cur_email_name];
if($cur_email=="" || !eregi($regex, $cur_email))
$error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
$fileatt=$_FILES[$att_check[$i]]['tmp_name'];
$fileatt_name=$_FILES[$att_check[$i]]['name'];
$fileatt_type=$_FILES[$att_check[$i]]['type'];
if (is_uploaded_file($fileatt))
$file=fopen($fileatt,'rb');
$data=fread($file,filesize($fileatt));
fclose($file);
$data=chunk_split(base64_encode($data));
$att_message.="--{$border}\n";
$att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else
$content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
$spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
$time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
$captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
preg_match_all("/http:/", $cur_field, $matches);
if(count($matches[0]) > $max_urls[$config])
$max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
$security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
// build appropriate message format for recipient
$content_type=contentType($charset[$config], $mail_type[$config]);
$message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
// build header data for recipient message
//$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
$extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
if($cc_tomail[$config]!="")
$extra.="Cc: ".$cc_tomail[$config]."\r\n";
if($bcc_tomail[$config]!="")
$extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
if($mail_priority[$config]!="")
$extra.="X-Priority: ".$mail_priority[$config]."\r\n";
// get attachments if necessary
if($attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$extra.="MIME-Version: 1.0\r\n";
$extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
else
$extra.="MIME-Version: 1.0\r\n".$content_type;
// send recipient email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
else if($debug==0)
if($set_flag == 1)
$subject = $flag_spam[$config]." ".$subject[$config];
else
$subject = $subject[$config];
mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
// autoresponse email if necessary
if($send_copy[$config]=="yes")
// build appropriate message format for autoresponse
$content_type=contentType($charset[$config], $copy_format[$config]);
$message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
// build header data for autoresponse
$copy_tomail=$_POST[$copy_tomail_field[$config]];
$copy_extra="From: ".$copy_from[$config]."\r\n";
// get autoresponse attachments if necessary
if($copy_attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$copy_extra.="MIME-Version: 1.0\r\n";
$copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
else
$copy_extra.="MIME-Version: 1.0\r\n".$content_type;
// send autoresponse email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
else if($debug==0)
$send_copy = 1;
if($copy_tomail=="" || !eregi($regex,$copy_tomail))
$send_copy = 0;
if($send_copy == 1)
if($set_flag == 1)
$copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
else
$copy_subject = $copy_subject[$config];
mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
// showing thanks pages from a successful submission
if($thanks_page[$config]=="")
echo "<h3>".$thanks_page_title[$config]."</h3>\n";
echo "<p>".$thanks_page_text[$config]."</p>\n";
if(strlen($debug_text) > 0)
echo "<p><b><i>".$debug_text."</i></b></p>\n";
else
header("Location: ".$thanks_page[$config]);
else
// entering error page options from missing required fields
if($error_page[$config]=="")
echo "<h3>".$error_page_title[$config]."</h3>\n";
echo "<ul>\n";
echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_message.$max_url_message;
echo "</ul>\n";
echo "<p>".$error_page_text[$config]."</p>\n";
else
header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?>
verify.php
<?php
require_once('recaptchalib.php');
$privatekey = "i hide this on the forum";
$resp = recaptcha_check_answer ($privatekey,
$_SERVER["REMOTE_ADDR"],
$_POST["recaptcha_challenge_field"],
$_POST["recaptcha_response_field"]);
if (!$resp->is_valid) {
// What happens when the CAPTCHA was entered incorrectly
die ("The reCAPTCHA wasn't entered correctly. Go back and try it again." .
"(reCAPTCHA said: " . $resp->error . ")");
} else {
// Your code here to handle a successful verification
?>
We have a saying in the Netherlands; "Not being abled to see the tree's trough the forest"
Well i dont see it anymore...
I managed to get it in the code but it doesnt work.
I hope someone can help me out!@Nancy O.
Thanks for your support i appreciate it that you helped me out a many times.
However i have read all of the topics you posted.
I know in the mail form i can disable the "sort of Captcha". I wanted to disable it and insert reCaptcha instead.
I will re-make the form because like you said (and i already figured it out myself) ;
"b) Don't modify forms until you get a very basic form working on your server."
And youre right, im taking too much work at once.
@CowboyInAZ
Im a hobbyist that learns really really fast.
Before March 23 i never used CSS, Javascript and XHTML. And never combined them all together with PHP. (never ever created a php based file from scratch)
The reason why i use other persons code is because i learn faster with examples, and because i dont need to reinvent the wheel if someone already invented it. The only thing i do with it is learn the workings, customise it and at last, rewrite the code when i understand it.
If you look at my current site: http://www.wientjesvoegwerk.nl/
You will notice that the site is validated by W3C with no errors and warnings.
I think it was Nancy O. that gave me the link to the validator. Thats how i discovered the service.
You need to know that in 1 day (from 63 errors and 12 warnings) i removed all errors. And i didnt knew much about it, and why errors happend while the site looks fine.
So im just curious how things work and thats why i "steal" codes and adjust them to learn myself.
I also want a education like you spoke of, but im interested in a different media.
I want to be abled to create my dream project wich involves new ways for game studios to earn money.
This is just a simple start, im also taking tutorials in C#, C++. -
Please help me my ipod wont work! D:
I need serious help D:! ok so i have succesfully synced music onto my ipod b4 but i wanted more songs so i was syncing music onto my ipod touch once again and once the sync was almost finished it said something about an error and then when i unplugged my ipod all of my songs that i had 1st put on my ipod were gone D:! after that my ipod stopped showing up on itunes on one of my computers so i switched to the other and it started doing the same thing. i came on here and was told it might be because itunes wasnt up to date so i updated itunes and my ipod but after the update, during the time when it was backing up software i think, another error popped up and said something about how the session had timed out, my internet connection is fine to so it wasnt that. after that another error popped up saying i needed to restore my ipod back to its factory settings and i said ok but another error always pops up saying the sesion timed out of something! now my ipod is like it was when i first got it! the screen shows the end of a usb cord pointed at the itunes sign! ive tried turning it off but it wont work! and when i try to hook it up to itunes on either off my computers it doesnt show up in itunes and a message from windows pops up and says "Found new hardware: Windows needs to install driver software for your apple mobile device (Recovery mode)" please help me i cant even do anything at all with my ipod right now! D:
The Internet provider might have too many people using the Internet than what the particular servers are setup for. Or your computer just needs to reset. Try restarting your computer. Also do a hard reset on the iPod. Hold the power button and wake button down until you see the apple logo come on. Let go. Then let the ipod finish bopting up . Then restore your iPod as a new iPod, NOT from the backup.
Maybe you are looking for
-
Hi, after messing around a few days with my new arch installation (and probably every other live distro in the last few weeks), I'm really tired of the problems related with the open source radeon driver. I read the ATI guide as well as the Xorg guid
-
Sharing multiple external hard drives running multiple OS's on AEBSn
Hi, I was hoping someone on this forum can help with this. I've been primarily a PC user but have converted to Mac thru a MBP. I purchased the AEBSn with the hope of having a networked storage solution for this mixed OS setup. The plan was to have mu
-
I can't open the store in ibooks, what can I do?
I have the iphone 4 and can't get into the store to purchase books, I have several books that I have purchased already (so it's not my first time trying to do this). I don't understand why one day I can buy books and the next I can't even open the st
-
Can't update font from CC Library in Illustrator
Once I have a Comp file open in Illustrator, I am unable to change font using a style I have saved in my CC Library. I can change the style using the usual character tools, and I can apply the styles in InDesign. When I select the text box in Illustr
-
I just got a new vista home premium 64bit machine. I enabled sharing on my main mac so I could use sharing in iTunes on the vista PC. My shared library in mac iTunes is not being found on the vista PC. Is there something else that needs to be done? I