My camera on my macbook pro has not been functioning at all. What do I do?

I've fully updated everything. My camera won't work on Photobooth, nor Skype. Photobooth even says I do not have a camera connected! Yesterday the little green light was turning on when I video called on Skype, but now even that won't turn on! I try reselecting it on Skype. I try restarting my computer (multiple times...) and I still can't get it to work! Please, offer any and all help you can! It's really starting to become an annoyance, and I need it to work! If you do offer help, it'll be greatly appreciated!

Try Reset SMC.  http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Similar Messages

  • My Macbook Pro has not been running correctly since "upgrading" to Yosemite

    My Macbook Pro has not been running correctly since "upgrading" to Yosemite. It has been sluggish no matter what program I am using, slow to respond to mouse movements, and unable to stream video. Any word on when Apple is going to send out a real upgrade?

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not  have the proper security settings. Help!?!?

    Hello:
    I keep getting this message upon startup. Can't figure out how to address it. Here it is.
    "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
    Any suggestions?

    There's an invisible one name "Icon" according to the error message.
    Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder.  At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    killall Finder
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    killall Finder
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

  • After updating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot.  Why?  What can I do about it?

    After upating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot.  Why?  What can I do about it?

    I ended up having to visit an Apple Store.  They claimed that the update must have aggravated an already corrupted hard disk drive.  The solution was to wipe my hard disk (fortunately I had recently backed up on Time Machine).  The "Genius" also claimed this was the first time he had come across the problem.  Although he was clearly able to diagnose it straightaway, and the next person he saw had exactly the same problem with his Mac, and I saw an awful lot of customers queuing up with their Macs and iMacs looking very suspiciously like they all had the same problem!  So clearly Apple know what the problem is but as usual treat customers as if they're idiots in order to cover up the problem.  But at least the problem is now solved (although having to take at trip out and wait in a queue at an Apple store, and then restoring from backups is a painstaking inconvenience I could well have done without).  All I can suggest is that you might as well take it in.  None of the "solutions" on the Forum are remotely on the ball, and all Apple "Geniuses" have clearly been told what the problem is and how to fix it.  Good luck!

  • HT1338 My macbook pro has OS 10.5.8.  What OS should I upgrade to?

    My macbook pro has OS 10.5.8. What OS should I upgrade to?

      Apple Support Communities  /  Desktop Computers  /  Mac Pro
    MacBook Pro
    Mac OS & System Software

  • Since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status

    since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

    since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

  • When I try to load my iTunes card it is saying it has not been properly activated.  What do I do?

    When I try to load my iTunes card it is saying it has not been properly activated.  What do I do?

    Are you able to try taking it back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Please can someone help,my in built camera on my Macbook Pro is not working what can i do to activate it back.

    Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
    Semako

    Yuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine. 

  • TS1365 My MacBook Pro will not startup.  At all.  The suggestions from Apple Support are not helping.  At all.  Someone help?!?

    My MacBook Pro will not startup.  Its not responding at all.  Does anyone have any suggestions on how I can correct this?

    HI Catherine,
    First, make sure it it shut down by holding down the power button for 5-10 seconds. Plug in the power adapter. Press the power button and hold down the shift key to see if you can start in Safe Mode.
    If the power adapter and/or battery are known good, the next thing I'd check would be the RAM to make sure it is securely seated. If batt and/or power adapter are questionable, then you'll want to find one or both and try them out; if you don't know someone with a similar MBP, this might be most easily accomplished by making a free appointment at an Apple Store "genius" bar.

  • TS1292 Hi. The message we are getting is that our card has not been activated correctly.  What do we do?

    Hi. The message that we are getting is that our ITunes card has not been activated correctly.  ITunes support is asking for a copy of the receipt, which i have long thrown away.  What do we do?

    Hi Scott,
    Use ProcessMonitor from Microsoft and look in the logs to see if there are any Access Denied errors. Also look in the IIS logs and Event viewer to see if anything there is being logged.
    Anti-virus software logs is another place to look....
    Pop up blocker in the Browser maybe or possibly adding the new server name to the trusted list.... Domain permissions possibly...
    If you browse the App from the Server does that work?
    Don

  • Hi all, i need urgently your help please. My touch screen on muy Iphone 5  is not working, i dont understand as it has not been damaged at all, i dont know what happened and need urgently somebody helps me please

    Please anyone there can help me what I can do??!! touch screen of my Iphone 5 is not working at all and dont understand as it has not been damage and it is only 2 months and half!! it is not an old iphone and it has not been damaged, has happened right now and cannot turn off the mobile at all. Tried to take out the nano sim as i though it will be turned off but it has not been! i dont know what i can do and i am desesperate!!! thanks All for your help!!

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • How can I install Mountain Lion in a VMware fusion, if it came with my macbook pro, and not purchased through the app store?

    I have Mountain Lion on my Macbook Pro with Retina but I want to install Mountain Lion in a VM for application testing. I try to install it from the recovery partition but it states that when I put in my apple ID, it states that it was not purchased through the App Store. My OS came with my Macbook. Is there anything that I can do to get it to install in a VM?
    Thanks

    Not really. The license that comes with pre-installed OS is only for that Mac.
    A. Preinstalled and Single-Copy Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non- exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple- branded computer at any one time. For example, these single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple-branded hardware.
    vs
    B. Mac App Store License. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/ itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
    ( i ) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software...
    (ii) If you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of...and
    (iii) to install, use and run up to two (2) additional copies or instances of the Apple Software within virtual operating system environments on each Mac Computer you own or control that is already running the Apple Software, for purposes of: (a) software development; (b) testing during software development; (c) using OS X Server; or (d) personal, non-commercial use.
    (I shortened B.i. and B.ii.)
    http://www.apple.com/legal/sla/docs/OSX1082.pdf

  • Why is my Macbook Pro has not installed iMovie?

    I read that the Macbook Pro have installed iMovie and other applications by default, but my macbook doesn't have them. When I look for the program in the app store gives me the price to buy it, the cloud does not appear as in the past with other apps.
    I'll have to pay for it? please help me

    Try quitting all open applications before clicking Shut Down from the Apple menu.
    You can tell which apps are open by the small reflection just under the app icons in the Dock.

  • Hi, my MacBook Pro has become very slow... what could be causing this and what can I do to fix it?

    Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Macbook Pro 13 not powering up at all. Totally dead

    I plugged in a mobile battery power station to charge today, http://www.iwantoneofthose.com/gift-tech-stuff/portable-iphone-charger/30001820. html
    and my Macbook pro 13 suddenly died. It will not turn on via the power button, there's no lights on the battery indicator on the side of the Macbook and nothing at all on the power adapter. I've checked the fuse in the plug and thats ok. Are there any internal fuses that could have blown in both the macbook and the power supply. I charged it before with no problems. Been through lots of these solution pages, but i'm totally stuck

    Well simple the battery in your Mac ran out of power. When that happens, which is really bad for the battery, sometime you must let the battery charge for X amount of time before the system will turn on. All Macs use both battery power and AC power at the same time even when the AC adapter is connected and the battery charge reaches 100%.
    So if the battery is fully drained the system will not turn on. Stop using the portable charger unit you have 100% charge of the internal battery.

Maybe you are looking for

  • I get the message to authorize my computer, but it already is ....

    I got a game from itunes today, but when i tried to but it in to my iphone I got the message that this computer is not authorized, but it is! And when I play the music from itunestore I got to log in to authorize the computer, but when I do I get the

  • Creating a script for a PRIMARY KEY USING INDEX SORT doesn't work

    Probably a bug. h1. Environment Application: Oracle SQL Developer Data Modeler Version: 3.0.0.655 h1. Test Case: 1. Create a new table TRANSACTIONS with some columns. 2. Mark one of numeric columns as the primary key - PK_TRANSACTIONS. 3. Go to Physi

  • Keynote 3 and fullscreen QT on a PC

    Hi guys and gals, I am new to this forum but would love to know what i need to do with this: I have just bought 1Works 06 and need to get a presentation on a PC from Keynote to include all the swish stuff like ransitions and builds. I can export to Q

  • Do i really need to install Microsoft Loopback Adapter ?

    i am installing oracle 10g on windows xp proffessional + AMD sempron 3100+ when started oracle universal installer, i received a warning like following : DHCP configuration detected , you need to configure ur primary loopback adapter to MICROSOFT LOO

  • PCOLL_CONTROL, PCST_TXN,...What are these objects? JBO-28039:Root node for collection

    I've a UIX JSP Application with BC4J developed with JDeveloper RC. I noted that in my schema there are these "strange" db objects: PCOLL_CONTROL PCST_MYPACKAGEMODULE_SEQ PCST_MyPackageModule PCST_TXN PCST_TXN_SEQ Can anyone explain what are they or w