My Camera will not work!

My Ipod Touch was working perfect last night then this morning I turned it on and went to take a photo and the camera will not turn on and the little photo button to take a picture won't work it's all black, both front and back camera will not work! Does anyone know how to fix this? or is it even fixable? or even know how much it would cost to get Apple to fix this? Im so confused any info would be great!
Thanks!

Have you tried the basics from the manual?
Restart.
Reset.
Restore.

Similar Messages

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • My front camera will not work after I downloaded the IOS 7.0.4 .. Why is that ?

    My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My itouch camera will not work. sometimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this??? please helpp

    My itouch camera will not work. SOmethimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this???

    Basics from the manual are restart, reset, restore.

  • I have purchased an iPad camera connection kit and when I attach my Canon Rebel XT I get a message that camera will not work.

    In the title, I have this kit and it will allow me to connect my camera to the iPad (and my iPod) but gives me a message that this model camera (?) will not work with either. The camera is a Canon EOS Rebel XT and about 5 years old. I had an earlier connection kit that worked with a Canon (don't know the model) earlier but now I have no function with this equipment. Any suggestions?

    With a Rebel XT / 350D you need to enable PTP (Picture Transfer Protocol) on it in its settings :
    Is that what it's currently set to ?

  • HT201412 Camera will not work on my iPod...help???

    The shutter on my camera will not open, so I cannot use my camera. I have tried turning my iPod off and then on again, I have tried resetting it, I tried accessing it by opening FaceTime, I have tried covering the front view camera...none of these tricks have worked...I need help?!?!?!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Will not:  rotate screen, camera will not work, iPad will not turn off, sound on side.

    Ipad will not turn off, sound button does not work, camera does not work,  screen will not rotate.  Have new ios and update.

    Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • My iPad 4 is kicking me out of apps and camera will not work

    The camera on my iPad 4 will not work and it will kick me out of apps constantly does any one have any ideas why this is happening

    Reboot your iPad, restore your iPad, or take it to the Apple Genius Bar for them to look at it.

  • TS3367 my camera will not work

    I've got a brand new macbook air. went to use facetime & camera is not working... showing a colorful distorted image.  tried photobooth, same thing. anyone know what's wrong? thanks

    I am going to assume, that even though you mentioned the MacBook Air, that this question does pertain to the iPad because you posted in the iPad forum.
    Quit the camera app, FaceTime and PhotoBooth  completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or .... Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Web Cam will not work

    I recovered and reinstalled all software but the Webcam will not operate. 
    There is not Camera listed in the Imaging devices
    but under sound, video and gaming there is the Cyberlink webcam virtual driver listed.
    I did a hard reset by removing the battery and holding down the power button and had it check for new hardware but nothing was found.
    The Cyberlink YouCam SW states that no webcam detected.

    stevelap wrote:
    I recovered and reinstalled all software but the Webcam will not operate. 
    There is not Camera listed in the Imaging devices
    but under sound, video and gaming there is the Cyberlink webcam virtual driver listed.
    I did a hard reset by removing the battery and holding down the power button and had it check for new hardware but nothing was found.
    The Cyberlink YouCam SW states that no webcam detected.
    This sounds like the webcam is dead or now working anymore...install skype and test that will tell you if it detect the webcam or not.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • After updating software to 8.2 on iPhone 6 both cameras will not work. Black screen.

    I updated my iPhone 6's software to 8.2 and now when I want to take a picture the screen is black. If I try to activate the front camera it is also black. Sometimes it will work ok, however, most of the time it doesn't. I have also tried tapping the button to take a picture and the a preview comes up.... what?! Then I click retake and the camera will work. But I have to go through this whole process every time I want to send a picture. This must be a bug, Apple, please help! =(

    seMONICAxy wrote:
    I updated my iPhone 6's software to 8.2 and now when I want to take a picture the screen is black. If I try to activate the front camera it is also black. Sometimes it will work ok, however, most of the time it doesn't. I have also tried tapping the button to take a picture and the a preview comes up.... what?! Then I click retake and the camera will work. But I have to go through this whole process every time I want to send a picture. This must be a bug, Apple, please help! =(
    Try resetting your iPhone.

  • Hey I was wondering why my front facing camera will not work, on snapchat it doesn't even give me the option to switch to my front camera anymore, when I go to my camera and switch to my front facing one it just stays black I don't understand it I need it

    I'm wondering why when I go to my camera and try to use my front facing camera it will not let me use it the screen just goes black for no reaso. And it will freeze up sometimes when I try, when I'm in snapchat it doesn't even give me the option to switch to my front facing camera anymore

    Please somebody help me    I'm begging you

  • HT204380 My camera will not work on my iPhone4s

    My camera shutter will not open and I can not use face time. Brand new phone. Help!

    Try this...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My camera will not work with Photo booth or any other camera application.

    I have an iMac Intel 21.5".
    Camera has always worked just fine.
    Suddenly it has stopped.
    The green light right next to the camera is on, but nothing is displayed on the screen (photo booth).
    No error message is displayed either.
    I have already tried the reset function (turn off, remove all cables and power cable for 10 sec, and turn it back on) but it hasn't worked.
    Any thoughts?
    Thanks

    Hi Rogerya,
    Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
    How to Troubleshoot iSight - Apple Support
    https://support.apple.com/en-us/HT2090
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    1. See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    2. See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    3. Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    4. Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    - Matt M.

  • My Camera will not work...says "Activity Not Found"

    I have tried to look at my pics and when I pull them up I get "No Activity found"...I took SD card and still does not work???
    Please help!

    Ok did you shut your phone down prior to removing the Card.  And removing the card isn't really necessary all that you'd have to do is Tap your settings go to Storage >> then go to Un-mount Card>>  Un-mount it and then Remount it that can sometime stir or Refresh the Card with out loosing your Pictures or Data   Now since you took the Card out of the phone Go ahead and re-insert it !!!  if the phone is ON  Shut it  OFF and re-insert the Card as i explained once that is done Turn the phone on & let if fully power up and go threw it's sequences.. Then go to your Picture Gallery and see if they'er there... Let me know what ya Find.. 

Maybe you are looking for

  • Problem with installing Oracle UI  and Oracle SP (ouiosp220160.jar)

    Hello, I have downloaded the installation file for Oracle Universal Installer and Oracle Software Packager which is in the form of a jar file: ouiosp220160.jar. WhenI try to extract it, the JVM says that the jar file is a corrupt one. So, I downloade

  • Can't resize partition after upgrading to Yosemite (using SSD drive)

    I upgraded to 10.10 and using SSD drive now. When I was using OS X 10.8.5, I could freely resize partition but not anymore. I guess because of the SSD drive and the new version of OS X, and Logical Volume Group could be involved. I don't want to wast

  • Multi Journal Import - Doubts ?

    Hi All Right now we are running a Multi Journal Import and we are inserting data into 4 interface tables gl_interface1-4. I would like to know , if i increase the table from 4 to 10 tables ? Any suggestions? Thanks Ravi

  • Configure JAAS login module stack to support x.509 certificates without SSL

    I want to use x.509 certificates for authentication against a EP 7.0 but I don’t want to have SSL traffic on the network segment where the portal resides. Obviously the SSL must be terminated in an application gateway that sends the certificate to th

  • Symbian Anna launch - week38 add-on's

    Hi all, we don't have new countries added to our Symbian Anna rollout this week, but have Symbian Anna officially live in Bosnia & Croatia now and additionally released more updates for countries that have already launched Anna in the previous weeks.