My camera won't work with IMAQ vision builder

I have a Hitachi camera , and a PCI 1407 frame grabber
the camera works well in MAX under devices , but when I open the IMAQ vision builder , it not visible in the devices , and I can't open MAX from the vision builder. It's gets me that error "1074397163" at the end it has bad interface
it's not the power supply of the camera since it works well at MAX , so its like the camera's name is img0 in MAX , and another thing in IMAQ vision builder, I tried updating my softwares but nothing happened, can anyone help please ??
thanks

Dalia,
I think I may need some clarification on what exact program and function you are using. Are you getting this error with the Vision Builder for Automated Inspection (VBAI)? Or are you using LabVIEW and are receiving this error from the IMAQ Init.vi?
If it is in VBAI, and you are trying to acquire an image, the Devices should auto-populate in the Main tab of the Acquire Image setup. Simply select the camera and press Grab or Snap.
If it is in LabVIEW, right-click on the interface input of the IMAQ Init.vi to create either a constant or a control. If it does not auto-populate with the correct camera name as it is in MAX, "img0". Or you can change the interface name in MAX by simply right-clicking on the camera and selecting "Rename"
Can you elaborate on what you are referring to when you say "the MAX explorer won't work in IMAQ"?
Huntington W
National Instruments
Applications Engineer
***Don't forget to give Kudos and Accepted as Solution where it is deserved***

Similar Messages

Casio Camera won't work with SL

My Casio EXZ850 camera doesn’t work with Snow Leopard.
Used it with Windows XP & then with Leopard just fine. When connect to USB ports not recognized by Mac. I checked System Profiler.app & under USB it is not listed. Casio Support is no help. They say it won’t work with anything above OS X 10.4 which is incorrect as I used it with 10.5 for over 1 year with no problems.

I take it that you ahve the IP set to static, or have a MAC address DHCP reservation for the camera, network settings OK.
WHat was the wireless authentication on the old router and what are you using on the new 4200?
Is it possible the camera does not support the encryption used by the 4200, i.e. wpa2-personal?
Have you tried WEP to see if the camera will work then?

MacBook Air (Early 2014) Camera won't work with Webex

Hi,
I just bought an 13" MacBook Air but unfortunately the built-in camera doesn't work with WebEx. It works on my iMac hat home though (late 2013 model). I've seen some of the discussions here but didn't find a solution yet. Can anybody help and point me in the right direction here?
Thank you!

I don't use WebEx, but one of these ideas may help you get things working:
tombirdy wrote: ... camera doesn't work with WebEx. It works on my iMac hat home though (late 2013 model)....
Are you using WBS 29.10 or newer with your "MacBook Air, OS X Yosemite (10.10.2)"?
WebEx min sys requirements here: https://support.webex.com/MyAccountWeb/knowledgeBase.do?articleId=WBX4830
If your camera works with Apple software (your problem is ONLY with WebEx), click here to sign in to contact WebEx support.
WebEx will be best able to help you use THEIR product with your Apple Mac System or tell you if it is not currently compatible.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Two brand new Isight cameras won't work with my computer!@!!= ARGH!!!!!!!!!

The first Isight I bought had some stuck pixels and was returned to apple for a new Isight. The new camera worked for a couple of days then screwed up the video with ichat and skype. Worked OK with Quicktime, Imovie, Quicktime Broadcast although it locked up like the first camera did when recording on native resolution in QT.
I hope my experience hasn't been typical of the Isight camera.
Why would it work with quicktime/imovie/quicktime broadcast but refuse to provide decent video to ichat or skype even after formatting and reinstalling everything. Why then would it work ok on a macbook with no problems but not work on an Ibook? Why would a firewire camcorder have no problems using any of the programs but then run into problems using an Isight camera?
ibook g4 12 Mac OS X (10.3.8)

10.6 Snow Leopard will run on any Intel mac. So that's any Mac made in the last 6 years. Snow Leopard came out in July 2009 and only cost $29. So you had over 3 years to have upgraded your MacBook.
You're willing to pay a couple of hundred dollars for a new phone but not the $29 in the last three years to have upgraded your OS on your MacBook.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

The bracket example that cames with IMAQ Vision Builder 6.0 uses a patte

rn matching tools for fixturing being located around left and right holes. When it executes it measures various parameters. The values that I am getting are different then manual (pdf) indicates. Does that mean that the tool placement affects measurements?

rn matching tools for fixturing being located around left and right holes. When it executes it measures various parameters. The values that I am getting are different then manual (pdf) indicates. Does that mean that the tool placement affects measurements?The left and right holes are found using the pattern maching tool. So, if the pattern match template are defined differently, then the center point for the match will differ also. This will then affect the measurement parameters.
My guess is that the images used for the PDF maybe slightly different, which will affect the results of the final measurements.

VuPoint Solutions DC-M306AT-VP Digital Camera - Does it work with iPhoto

I'm looking for an inexpensive digital camera for my son. One option is the VuPoint Solutions DC-M306AT-VP 3.1MP fixed focus camera. I saw it at Ritz Camera. Its only $69.
Has anyone tried connecting this camera to iPhoto? It has built in memory (16MB) plus an SD slot. I'm guessing that even if the camera won't work with iPhoto, the SD card can be read in an external reader. Your experiences would be greatly appreciated.
PowerMac G4 Dual 1.25GHz Mac OS X (10.4.8) FW800, 4 internal HD - 870GB

Keith,
Thanks for your reply. After going to their website http://www.vupointsolutions.com (which I didn't find earlier because Google searches inundate you with sellers rather than OEM links), I found some more clues. The FAQ for this particular camera states no drivers are needed for Windows XP and 2000. This is typically true for standard USB devices like memory card readers and hard drives and those usually also work on a Mac so I'm getting more confident that it will work.
But, there was another odd entry in the FAQ that kind of turns me off. It states that its normal for the camera to drain the batteries dead even when its not being used. It has internal SDRAM to keep alive. If the batteries die, you lose any photos stored in the internal memory and they recommend using an SD card.
For a few dollars more (approx $112), I'm leaning towards the Nikon Coolpix L10 or Canon A460. I can use it myself when I don't want to lug the Canon Digital Rebel around.

I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

A Canon EOS D60? It had support since Camera Raw version 1.0.

Firewire port on Macpro won't work with my Sony DV Cam

I just got my Macpro and love it-but I do have a small problem that maybe somebody can help with.
I have a Sony PD100A. I was using this camera on my PC just up until last week and grabbing video via firewire into Premier. It all worked fine.
On my Mac, I plug into a firewire port, and neither iMovie or FCpro can capture from the camera. I seems to recognize the camera, but when you try to capure video, it just locks up.
I also have a firewire hard drive that I'm using to tranfer data from my PC to the Mac-it works just fine. Which leads me to believe somehow the camera isn't working with the Mac.
HOWEVER-I use a Digidesign Digi 002 rack attached to a firewire port on the back. The 002 has a passthrough firewire port on the back, so I hooked up the camera. Lo and behold, the Capture now works. But only by going through the 002.
I'd really like to be able to capture video by just plugging my camera inot the fron Firewire posts after I shoot some tape.
Does anybody have an idea why the front or rear firewire ports won't control or capture from my camera directly?
Thanks in advance for any help with this.
Greg

A couple of things to try…
1) Open a new user account and see if it works there
2) Reset PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
3) Reset the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
4) Try your other Firewire ports
5) Boot off another drive and see if it's your software rather than possibly hardware

Icon of camera won't work to send pic with text

icon of camera won't work to send pic with text

Howdy Mitzymom,
Welcome to Apple Support Communities.
It sounds like there is an issue sending texts with photos from the Messages app on your iPhone. If the issue only occurs in when tapping the icon in the Messages app, not when texting pictures from other apps like the photo app, try the general app troubleshooting suggestions below on the Messages app.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
If the issue occurs when trying to send texts with photos from any app, try the MMS and iMessage troubleshooting suggestions here:
iOS: Troubleshooting Messages - Apple Support
Take care,
-Jason

Elements 13 won't work with new camera, it won't update to raw 8.7.1

Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1
Thanks
Biswajit

Howdy Biswajit,
The IMAQ and Vision ActiveX controls you are using with Visual Basic 6 do not install with Measurement Studio. They are installed when you install the IMAQ software and include support for Visual Studio 6. Upgrading to Measurement Studio 8.0.1 will have no effect on your IMAQ controls since they are not related to one another. Purchasing Measurement Studio Professional or Enterprise packages allows you Visual Studio 6 support for other ActiveX components. Refer to this link for a list of ActiveX components included in those packages.
If you are asking about using the ActiveX controls in .NET, then take a look at this KnowledgeBase entitled Do NI-IMAQ and NI Vision Support Microsoft Visual Studio .NET?
Hope this clarifies things!
Best Regards,
Jonathan N.
National Instruments

My Samsung Sync Master 225UW's camera (webcam) won't work with my Mac mini

Hi,
I need help making my monitor's webcam work with my Mac mini. I have Mac OS X 10.5. When the computer launches the screen turns on, everything's perfect but the webcam will not turn on when I launch Photo Booth or iChat....what should I do?

That camera doesn't work with my mac either (I'm using it right now with a g4 powerbook, but will try again with my new power mac coming in... though I doubt it will make a difference)
The 225UW is specially made for Windows Vista, and I wonder if it needs a mac driver for the camera or something. We may be S.O.L. I knew that was a possibility when I ordered this monitor. Oh well... pay yer money... take yer chances.

Camera app not working with logitech webcam with new windows 8.1 update

My Logitech camera app was working fine before win 8.1 update.
ALL drivers are updated.
Camera works fine when I run Logitech program/software, just won't work with camera app included win windows 8.
I just get a dark screen.
I searched forums. This appears to be a common problem. Microsoft Techs just state uninstall camera app and reinstall. But, this is an app that won't let me reinstall. Plus, I search Microsoft Store and can't find the camera app.
Any suggestions.
Thanks

I'm having more or less the same issue, but it extends beyond just the app. I'm replying here because this is the topic I was referred to by one of your support members on twitter and I'm trying to help keep things organized so that hopefully one day Microsoft
can solve the issue.
I have the Logitech Webcam HD C 525 which worked perfectly fine on my Windows Vista Home Premium machine. I recently built myself a computer and purchased Windows 8.1 complete (I heard that you could chose the OS language and as I'm living overseas I was really
happy to finally be able to use Windows in English).
I'm using Windows 8.1 64 bit and got around to installing skype on Christmas eve so I could video chat with my family back home. However, I ran into an annoying issue when trying to use the webcam. I installed the latest drivers and applications clean and straight
directly from Logitech, plugged in the webcam and it was not detected.
Following the troubleshooting info from Logitech, I then switched my camera from a USB 3.0 port to a 2.0 one, this shouldn't matter, but I tried it anyway. It changed nothing. I uninstalled and reinstalled the drivers multiple times with no change.
After a bit of reaching out on twitter I had a friend suggest using ONLY the Microsoft drivers for my device. I COMPLETELY removed and deleted the device and drivers from my machine and then installed them using the info found here in the troubleshooting section:
http://windows.microsoft.com/en-us/windows-8/camera-app-faq.
I plugged my camera back into the 2.0 port and my camera flicked on for 2 seconds (preview included) then shut off again and told me it wasn't detectable. I opened Skype and it seemed ok. When it came time to actually Skype with my family skype could no longer
detect my webcam. It flicked on and off briefly and told me it wasn't detectable.
The current state of my webcam is that it is buggy and unreliable. Opening skype or the logitech app or ANY app that uses my camera yields the same result: an endless loop of my camera flickering on and off, and messages of "not detected" between
images from my camera. The camera still works on my old computer normally, thus it is not an issue with the camera itself.
I have read many people having my same issue with various webcams (not just Logitech because I briefly considered buying a Microsoft one) and the one thing in common was it was all on Windows 8.1
As posted in a few posts above I downloaded and ran Process Monitor while I opened skype and my camera sat through the endless detect/non-detected issue it has currently. I hope I have the log information saved correctly (if not I can re-do it, it is not difficult
to reproduce as it happens all the time). I could not figure out how to copy/pase the information in the log file, so here is a link to my log file:
https://drive.google.com/file/d/0BznPyE0dem06eVJWRWdFVllhQTQ

Pogo won't play games java won;t work with firefox

I was playing pogo and it came up to update Java. Did it and now can't play most of the games like canasta. Says java won't work with firefox.....it did before. try for 4 days not and no luck

Java is working properly. Still not loading games

IPOD won't work with SYNC in my new Ford Fusion

IPOD won't work with SYNC in my new Ford Fusion in the UBS port that is made for IPODs etc.
Older model IPOD
Any fixes?

I also had problems with iTunes 7 when it first came out, but 7.0.2 is working for me and seems to have fixed a lot of the problems. It's worth a try if you need iTunes 7 for your new iPod.

My camera won't work with IMAQ vision builder

Similar Messages

Maybe you are looking for