My cannon printer Pixma Mx439 has an error code of 5100

 My cannon printer Pixma Mx439 has an error code of 5100. I had a paper jam and cleared it, I took out the ink and replaced it, I have no idea of what else to do at this point. Are you able to suggest anything else. My printer is less than a year old, I should have a warranty.
Julie

Hi julieannbean,
Cleaning the timing encoder film of the printer may resolve the issue you are experiencing.  To do this, please follow the steps located at the link below:
Cleaning the Timing Encoder Film
If you still experience the same issue after cleaning the timing encoder film, the printer will require servicing. 
Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Pixma mx439 power up error code 6910

    When printer is powered up there is several seconds of printhead movement then a blinking on light and a message "printer error" "6910". Visual inspection of printer shows nothing obviously wrong.

    I'm having the same issue with the mx479... Any suggestions?

  • Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Hi bdtcop,
    I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • TS3694 my iphone 4 has a error code (3002 code). what exactly of it mean and what should i do to solve this problem? thanks you

    hi everyone. my name is joseph, i got the problem on my iphone 4 16GB BLACK. first time i did damage the battery connector and i have some store fix it for me, thaey actually sodered it and right now the iphone is not chargeable. the only thing i can do it to plug directly in the with the cable charger in other for the phone to bea able to use, but when i disconnect the cable, the phone is power off completely. right now al i can do is to connect to the itunes and try to restore it and its shown that my iphone has an  error code which is (3002). i dont know whats mean and how to fix it. can anyone give my some suggestion what i mean to do? thanks you for your read

    Also I've tried to reset it and it still keeps doing the same thing

  • HT201210 My Ipod has an error code of 1604 when trying to restore.  I have followed all recommended instructions...any ideas.??

    My Ipod has an error code of 1604 when trying to restore.  I have followed all recommended instructions...any ideas.??

    If you did all of this
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • I cant get the itunes store to work , it has a error code when I try to use it, any idea why?

    I cannot get the itunes store to work, it has an error code when I try to use it, any ideas?

    What error code number are you getting, rodeo?

  • HT201210 My ipod has received error code (9).  I have tried to restore, but failed.  Any idea how to restore back to original settings?

    My ipod has received error code (9).  I have tried to restore, but failed.  Any idea how to restore back to original settings?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • When i try to burn my playlist it starts then stops and has a error code 4450

    when i try to burn my playlist it starts the first song then stops and has a error code 4450

    Hello Clubcon,
    Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes.  I recommend reviewing the following articles for steps to troubleshoot and resolve this issue:
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    See this support document for information about update and restore errors. Resolve iOS update and restore errors

  • I wanted to print with my Cannon printer but it displayed an error message B200. How do I fix it?

    Yesterday I wanted to print a text with my printer, but it I was getting the error code b200. What's the problem? How to fix it, any help will be appreciated!

    what model?
    how many times does it flash orange when you power up?  or do you get a green light?
    have you upluged at the wall, then left it to sit for a few hours (so with no mains cable in)?
    this apparenntly resets it

  • Pixma ip 4900 U330 error code

    Hi All ,I'm hoping someone can help.I have a Pixma ip 4900 and have never had any trouble.Today I came in after my mother printer something and the power Lamp Flashes and Alarm Lamp Flashes Orange Alternately.Which is an U330 error code  and if I try to print I get and C000 code.I have
    Disconnected the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply.
    Plugged the printer back in and turn the printer back on.About 5 times.When I turn it on the print carrage slams to the right making a loud noise and then it starts blinking. Also the ink tanks are not lighted.I need to print some shipping lables .Help! Thanks.

    Paolo,
    Am sorry i offended you by marking the answer as useful. I was going to mark all your answers as useful then the final answer as the correct answer
    I don't know how the ratings work - i though that the final answer is marged as the correct answer and the rest just helpful answers
    I did not mean to offend you - and definately not send you away .
    Receive my sincere apologies. I understand your stand and terribly apologise for the misunderstanding in ratings. I know you are very good in Voice, its a pity that i had to be the one to demean your rating as such.
    Sincerely,
    Faith

  • TS1424 I have used itunes forever, now when I try to go to the itunes store, it says an error has occured error code 3212, how do I get back into the itunes store

    I have used itunes forever, Sunday night when I tried to get into the itunes store an error popped up and said could not open; error code (-3212), How do I get back into the itunes store?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • What I should do when my iphone 5 has an error code 31 in shown device manager of my laptop?

    My iphone 5 does not recognize as a personal device in my laptop however it is recognize in itunes and it is charging once I connect it to my laptop. In device manager of my laptop, my iphone icon under personal devices it has an exclamation point and checking further details, an error code 31 is being detected. I've to uninstall and disable this from the device manager but it cannot be completely install because of this error code 31.

    Hello don muchie,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • My printer keeps giving me the error code of: "b841ebfc." do i just need to replace the color ink?

    I lifted the lid on the printer, resulting in the red light to the right of the zoom-in button to start flashing.  Right now, the view scree is blank.  The printer usually asks me to power off the printer.  I do, then it goes back to the error code and I have to start all over again.  My printer is a dead paperweight right now.  What do I do?  Thank you so much for reading my question.  I would appreciate any input that you could give me.  

    annaxoxo wrote:
    The macbook is in perfect working order when plugged into the charger
    Model Information:
    That is a good sign.
    but turns off once unplugged.
    Model Information:
    That is a bad sign.
    When you unplug the charger, does the date and time change in the menu bar to a default value?
    That to me suggests that the battery is the problem.  However you could run an Apple Hardware Test to see if other issues are picked up:
    http://support.apple.com/kb/ht1509
    Unfortunately a test with an error free result is not always 100% reliable.
    Ciao.

  • My imac8,1 has an error code of 4HDD/11/40000004:SATA(0,0) what does this mean and where or how can i get this fixed?

    I need my computer although it is old i bought it in 2008, i just can not afford a new computer. Could someone possibly tell me the meaning of my error code?

    The error shows a problem with the hard drive, and as it says SATA, it may be related to the SATA connector of the hard drive or the logic board. I recommend you to take it to an Apple Store or reseller to get it diagnosed, so you will know what the problem is and they will provide you a solution. If the problem is in the logic board, this may be an expensive repair

Maybe you are looking for