My Canon 6D pictures will not preview in latest Adobe CC suite

This is despite thumbnails appearing - this happens in both Lightroom CC and Bridge CC - can anyone please explain or point out what I might be doing wrong - its not as if the 6D is brand new? Regards AW

can some one help me with Adobe Flash that will not upload pictures in snapfish.Thanks Don

Similar Messages

  • Attached pictures will not display only appearing as symbols. Can only be viewed on downloading.

    Sent and received attached pictures will not displw as a slide show or individually in mail.

    Thanks again for your reply. I'm not sure what a "cid" is.
    I've sent four images the first of which is from a Canon camera which prefixes with a camera Id.
    2 and thre are prefixed _ or P which indicates they are written in Adobe RGB or SRGB 1968 respectively.
    The fourth has had the "cid"s removed.

  • CS4- Pictures will not update until I choose a tool

    When I try to do anything to a picture the effect or change will not occur until I click on a tool.  Then it will instantly show the change I made.  Doesn't matter what tool I choose and doesn't matter what the change..i.e. sharpen....using a filter etc.  Also, for instance, if I choose unsharp mask (doesn't matter what I choose...this is just an example) the picture will not show in the preview window unless I choose the plus or minus symbol beside the 100% and will not show in the preview until I choose one also.  I've tried this on several different layers.  I already had the latest 11.0.1 I believe and have not updated or installed anything lately.  Did a complete virus scan.  My old drivers were working fine but updated to the new ones to try and see if it would help.....amd/ati radeon 3100.  Used shift + CNTL + ALT to clear my preferences....I have tried it with GL on and off.  In short I have tried everything I can think of.  Basically everything works perfectly except after you make any kind of change you have to click a tool or something else before you see the change.  Even clicking the little eye symbol beside each layer will not let you ...see or hide...that layer until you click the eye symbol and then click a tool. Sometimes on starting the application all the choices are greyed out....even exit....until I click a tool.   Anyone got any ideas?  Thanks for your help.  I don't want to have to resinstall...I am on vacation for the next 3 weeks and would like to be able to edit my pictures.

    av8rphoto wrote:
    I already had the latest 11.0.1 I believe
    Did you actually check?  (Help > About Photoshop)
    Re-installing  Photoshop from the DVD or saved download (and updating) is not such a mammoth task by the way.
    There was a similar snag reported some months ago, maybe a forum search would find the posting.

  • Will Not Preview clip in Log & Capture w/ Point&Shoot Camera

    Hi, I am trying to capture from a point-and-shoot camera, the Canon ZR500. I have the camera hooked up with Firewire and FCP recognizes the camera. In Log & Capture, however, the clip playing on the camera will not preview in the window. When I hit capture now, I get the spinning beachball of death! I have tried different firewire cords. Sometimes it works, sometimes not. Help!

    I am trying to capture from a point-and-shoot camera, the Canon ZR500.
    Is this a still camera that can shoot video? If so, you will need to offload the files and convert them in another application, maybe something from Canon that only runs on a PC. Search for that camera model here on the forum, you may find some useful pre-existing threads.
    bogiesan

  • I have photo sharing turned on, on both my Iphone 5 an my PC Icloud control panel but yet my pictures will not show up on my PC, how do I fix this?

    I have photo sharing turned on, on both my Iphone and my PC icloud control panel, however my pictures will not show up on my PC how can i fix this?
    I had a previous problem with this with my old iphone 4 and did not realize there was an issue until it was stolen. I would like to get this straightened out just in case anything ever happens with this phone.
    Thank you in advance for any help.

    Hey LBert7,
    I would try the recommended steps in the following article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.

    Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.  I also cannot attach any of these pics into an e-mail or into any other file.  I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild.  Any Help?!  Any Suggestions on how to fix this?!  I have spent almost 2 days now going through all of the published help.
    I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

    The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
    If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database  --  if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
    If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
    You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
    LN

  • After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

    After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version".  Any help will be greatly appreciated.

    Sorry,
    Yes, the error message is exactly like that  ("Database error: failured to persist version")
    No photos will import at all.  I use USB to import from iPhone 5s or iPad 2. 
    About the difference?  iPhoto and Photos .  Are there two softwares?
    I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro,  iPhone 5s and iPad hard drives using iPhoto.  It's call iPhoto library.  At one point I turned off streaming. 
    Thanks again Larry HN.

  • When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    Hi there dworthen,
    It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Screen does not rotate
    http://support.apple.com/kb/TS3805
    -Griff W.

  • I'am trying to copy pictures from Print Shop to send as a e-mail, not an attachment but putting the picture in the actual e-mail. The lettering from the Print Shop document will copy and paste but the picture will not. How do I get it in the email?

    I create a document in Print Shop Delux download pictures from that program to make a flyer. I'am trying to send the flyer to someone and they do not want it as an attachment so I'd like to send it in the body of the e-mail. They lettering on the flyer copy and paste but the picture will not copy and paste. How do I get the picture to copy and paste in the body of the e-mail. I can't copy and paste the whole document because in did a insert text box for the picture.

    Click the image , hold your mouse button, drag it and bring it to Firefox window from task bar below and release it into the body of your e-mail.Works on Gmail, Yahoomail , Hotmail....May not work on other e-mail service providers.

  • Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

    Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

    The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
    To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
    If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

  • Help!  New to Mac! Pictures will not load on Safari (blue question marks)

    Sometimes when I surf the web (especially sites like Facebook.com), pictures will not load. They turn into little blue check marks. Eventually, none of the pictures on the webpage will load. I have to shut down Safari, reboot my computer, and then pictures load again for a little while. Any advice? Please help!

    ... you may have something slowing your connection if you are wireless...I get this from time to time and believe that it is generally a connection speed issue related to interference or distance from my airport. The signal is usually great, but drops off from time to time.

  • Sharepoint 2010 : Dashboard designer Datasource(Sharepoint List) will not preview data.

    Sharepoint 2010 : Dashboard designer Datasource(Sharepoint List) will not preview data.
    Preview Data-->No data
    default view is "All Items.aspx"  and I have site collection admin access.
    Any help Appreciated.
    Kannalo

    Hi Kannalo,
    You should first deploy the Dashboard to a preview site then you can preview in Dashboard designer.
    For more detailed steps to deploy a dashboard to a preview site ,please view this site:
    SharePoint 2010 PerformancePoint Services : Dashboards in Dashboard Designer (part 1) - Creating and Deploying a Dashboard :
    http://allcomputers.us/windows_server/sharepoint-2010-performancepoint-services---dashboards-in-dashboard-designer-(part-1)----creating-and-deploying-a-dashboard.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • HT204291 I am trying to play a movie from my ipone4s to my apple tv and I can get the audio but the picture will not play. What am I doing wrong?

    I am trying to play a movie from my iphone4s to my television using apple tv. I can hear the audio. It the movie picture will not play

    Welcome to the Apple Community.
    Where's the movie from.

  • Muse will not preview with edge animate

    Once I have published my Edge content I place it in Muse and then try to preview it using the preview button.  It will not work.  I preview my work using the Edge Animate previewer and it plays just fine.  I play the HTML file in Firefox and it works.  I have scanned the web for two days without any luck to a solution.  Thank you in advance for any help.

    responded to your another thread, Muse will not preview Edge Animate File

  • I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    carolweiler wrote:
    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
    See:
    Camera Raw plug-in | Supported cameras
    You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
    So, you can choose between 3 solutions:
    - update PSE to PSE12
    - use the Canon software to convert the raw files to the tiff format which PSE10 can handle
    - download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
    The last two solutions are free.

Maybe you are looking for