My Canon LIDE 600f won't work on my Mac Lion

I've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but:  My Canon Scanner LIDE 600f won't work on my Mac Lion.  Any ideas?

With the scanner driver installed and the scanner connected to the Mac, if you open System Preferences > Print & Scan, is the scanner shown in the list of devices? If not, are you able to add the scanner?
And if you open Image Capture located in Applications, does this show the 600F in its list and peform a scan if selected?

Similar Messages

  • .avi animations made with Flash won't work on my mac laptop (version 10.6.8) ...

    .avi animations made with Flash won't work on my mac laptop (version 10.6.8) but they used to. What is the problem?

    let me be more specific, the .avi animations will not play in Quicktime on this laptop, but they used to. When I import them into final cut express they won't show up there either. What should I do to fix this?

  • My Magic Trackpad won't work on my Mac Mini?

    My Magic Trackpad won't work on my Mac Mini? The cursor moves a little and then will not respond at all. Gestures do not work

    Yes, it's one of the things that can interfere.  Here are some others including airport.  Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
    http://support.apple.com/kb/HT1365
    Captfred

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

  • Since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

    since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro

    Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro
    I'm outputting a Mac projector file that will work on my mac computer. However, when I upload it to FTP and download it my mac or another mac, it won't work! What's going on? I've tried adding ".app" to my file and it still won't work. Help!
    Here's my set up: Flash 8 Pro on Mac Intel with Mac OS 10.4.11

    Hi,
    Does it work if you .zip up the projector and FTP the .zip and then unzip the projector on the other Mac's?  A projector is basically an application.  Applications in Mac's have package contents and resource bundles.  When copying files over the network on Mac's, symbolic links inside the package contents and bundles can get messed up.
    Thanks,
    Nivesh

  • Ack!  AU plugins won't work on Intel Macs!

    I know this is already known, but does anyone know what to do about the fact that all our old AUs won't work on Intel Macs? I just got a new mini and wanted to use the good old C3 compressor and it wasn't there, even though I had installed it in the usual place.
    I'm not even gonna bother trying to add Guitar Rig 2 until I hear that it works.
    Any news on new ports of C3? Or any new Intel-compatible AUs?

    Hi chris,
    You need to check all the sites where you got your plugins to see if they are Intel ready (most should be in the next couple of months).
    Check out this thread for a bunch of free plugs too (some of wich are Intel Compatible). Thanks go to Warrior Ant for the VAST majority of these posts.
    http://discussions.apple.com/thread.jspa?threadID=378467&tstart=0

  • I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.

    I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.
    I was using a Reliance Netconnect+ and that was working on the same machine. Kindly suggest if there is a way that the TATA PHOTON MAX can work on this.
    Thanks!!!

    Contact the maker of that product.

  • Canon LIDE210 scanner won't work with 64 bit arch.

    I have a Canon LIDE 210 flatbed scanner which is supposed to be fully supported in linux - for many many months if I plug it in, and start up GIMP to use the scanner plugin - initially it looks like it will work but although it successfully completes a preview scan, if I ask it to do a full scan of a page or section of page it makes abnormal noises, and ends up usually screaming as if in pain, and then the sane application hangs. This is if it is plugged in to a laptop with usb3 cable connecting the laptop to the scanner, and running 64 bit arch.  Yet the same scanner plugged in to a laptop which only has usb2 ports, and running 32 bit arch works flawlessly running the scanner in the same way.
    I expect that the 32/64 bit arch issue is not relevant, and it is some problem with the usb3 drivers not being compatible with the usb2 capability of the scanner that is causing the failure.
    I have seen some suggestion (from a Ubuntu forum) to "In the UEFI/BIOS change the setting under USB configuration, "XHCI Pre-Boot mode" from enabled to disabled. In some BIOS configurations this setting is known as "XHCI Mode". Is there a better way to resolve this since usb3 external drives and usbkeys work fine without this change on the same machine.
    Does anyone have any experience with running usb flatbed scanners via a usb3 port, and if so is there a workaround that is known to work with this particular scanner? I have seen the thread at https://bbs.archlinux.org/viewtopic.php?id=184816 which also did not lead to a solution.
    It would be nice to find a way to deal with this although perhaps a newer linux compatible scanner that is equivalent to the LIDE 210 is available that is compatible with usb3?

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canoscan LiDE 210 won't work on my macbook pro

    Can't get my scanner to work on my macbood pro, OSX 10.8.4.  I've downloaded the driver for the scanner and the MP Navigator EX 5.02.  MPNav won't even open.  LIsts only a few Canon products supported.  EXTREMELY frustrating.

    I should have clarified I was referenceing the software as Canoscan LiDE 5.0.1.4 for Mac OS X. It appears to be the most current version.
    The scanner is a Canon model CanoScan LiDE 600F. After posting, I found and installed the current scanner driver. Same results with a subsequent scan attempts. The preview displays the full picture, but finished horz. image is clipped at the top and shows part of the sprocket holes at the bottom of the frame.
    But after teasing the piece of film into the most extream position against the bottom edge of the holder with a toothpick I was able to trial and error some full frame images with minimal clipping. I suspect it is a software problem. Probably some focusing or alignment algorythm
    The film adapter is a 13"X4" device that lays on the larger glass, a cable plugs into a port labled FAU and the device engages two magnetic latches to exactly position the film adapter. The adapter itself has a hinged lid and seems to be disigned for a 35 mm strip of film, not an idividual cut frame. The larger scanner lid is double hindged, so it can close over the film adapter when its mounted on scanner bed.

  • Canon LiDE35 scanner won't work with latest CanoScan software

    I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
    If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
    Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
    Best regards,
    Steve Schulte
    Tuesday 27 April 2010

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canon Lide 35 No Longer works in Snow Leopard

    Here some more specific results on what happens when you try to scan with the Lide 35 in Snow Leopard.
    1) The ONLY choice is to use image capture. Canon software doesn't work
    2) Detect Multiple images is completely broken
    3) The image size is super small. )i e, the dimensions settings don't work right
    4) You have to increase the resolution to 600 to 1200 in order to "fool" Image Capture into scanning at the proper size
    5) As soon as you select Ovweview a second time, it stops working and gives you a blank scan. You have to log out and back in to get it working.
    6) The only "workaround" I've found is to scan the same dimensions every time at 1200 dpi and edit and save the photo in another app.
    I realize the Canon Lide 35 is an older scanner, but please Apple, none of us want to buy a new scanner just because we upgraded to Snow Leopard.
    I've spend an hour on the phone with Canon who tried to be very helpful. This happens on all my Snow Leopard Macs (I have three) and it seems clear that this is an Apple issue.

    Hi Tee,
    I can confirm what you are saying. I am running MacOS 10.6.2 on MacBook Pro and when I was trying to use my Canon LiDE 35 after installing "lide35osx7721en.dmg" and also "cstbosx5013ej4.dmg" I am still getting the error message "driver not found". The same Canon LiDE 35 still works beautifully with my PowerPC G4 under 10.4.11. - I am not sure whether there is any other software? The only oddity when installing those files I noticed was that "CNQL1208_ClassicNotSeize.kext" would not load...
    I have no solution to offer at this stage other than using the old Apple... Anybody any ideas??

  • Canon MX 860 scanner won't work after installing Mt Lion

    After upgrading my IMac to Mountain Lion v 10.8 my wireless Canon MX 860 scanner function won't work. The printer works. When I try to start the scanner either from the keyboard or the scanner I get an error message: MP Navigator EXquit unexpectedly.
    I downloaded and reinstalled the scanner driver
    mac-mx860-14_11_4a-ea8_2-1.dmg
    and restarted and it still doesn't work.
    any other suggestions?
    thank you

    You may also need to update MP Navigator to v2.1.3. If you are using an older version then trash that version before installing the latest version.

  • Canon MP780 printer won't work on Lion

    I've recently upgraded my Mac to one running Lion 10.7.2.
    My Canon PIXMA MP780 no longer works. The icon is sitting in the dock with a no-entry sign through it.
    I've downloaded new software and drivers for it, restarted, deleted and re-added the printer via System Preferences, and am really not sure what to do next...
    Have emailed Canon who can take up to 5 days to respond.  I'd like to do some printing before that if I possibly can.
    One thing I wasn't able to do that Apple recommend here: http://support.apple.com/kb/TS3147 is to reset the printing system.  The dialogue box they refer to doesn't contain the 'reset printing system' option they refer to here: http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
    Would be most grateful if anyone has experience of this or knows of a fix.
    Many thanks!
    Helen

    I have the same problem!  I upgraded software and the Canon MX780 printer just went away.  Print & scan has the Canon MX870 series put only the scan options.  However, I can still print from a networked laptop.  Just like I always could.  Thinking of importing the laptop DMG and trying to install it.  Canon site has only a scanner driver.
    Apple support site tells me that Canon printer driver for MX870 is"
    Canon MX870 series
    10.51.2.0
    P
    Like I said I can print from a networked laptop.

  • Canon Print Studio Pro quit working after upgrading Mac to Yosemite

    I just upgraded my Mac to Yosemite and now Canon Print Studio Pro plug-in won't work. Error message Missing destination folder /Library/Caches/Canon/PrintStudioPro/PrintStudioPro_LR_TEMP. I tried creating the folder manually, but that didn't work

    hi! im having the same issue here, but when i look for the plugin under utilities it says:
    There is no - utility for the OS version you selected. 
    http://www.usa.canon.com/cusa/professional/products/printers/desktop_printers/photo_inkjet _printers/pixma_pro_100 
    HELP! PLEASE!

Maybe you are looking for