My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help!

My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help! I have scanned thousands of old photos over the last few months without problem. I scanned several full pages from photo albums right before this problem began. I wonder if there is some sort of memory which is not being cleared. I have researched everything I can findto no avail. Any ideas?

I'm not familiar with this software, but if your scanner is supported, you can achieve this task via Preview.app.
Printer and scanner software available for download
http://support.apple.com/kb/HT3669#gestetner
I believe your model would fall under the MX880 series, and if that's correct, you'll be all set once you learn Preview's way of scanning.
Best of luck!

Similar Messages

I have just installed a Canon Pixma i7250. How do I access i photo from the Canon software

I have just installed a Canon Pixma i7250. How do I access i photo from the Canon software

Hello, not sure about the Cannon SW, but are you trying to Scan or Print?

Is there a native app/software that will get my photos all the same size?

I know how to do this with photoshop but I'm not sure if there is any Apple native app/software that will do this for me.
Lets say I have 5 photos of different sizes and I want them all the same size. I know I could reduce them all in preview but that doesn't allow me to move the photo around and cut out stuff I don't want in it. Or I could crop them in Preview but then they are not automatically all the same size.
The way it works in photoshop is: I open up a new project that is the same size I want the photos to be. Let say 900x644. Then I copy one of the photos I want in that size (lets say it somewhat bigger) and when I paste it into that blank new project that is 900x644 I can move the pasted photo around to get it so what I want to fit into that newer smaller size is there.
Is there any way to do this without special software on a regular Mac. I'm trying to help a family member who doesn't really want to buy or learn a complicated graphics program. They have iLife 11 BTW but I don't see a way to do it with iPhoto.
Thanks for any ideas you may have!
Susan

Use the Automator app (it's in the app folder) to resize a batch of photos:
http://osxdaily.com/2011/12/20/batch-resize-pictures-in-mac-os-x-using-automator /
I just tried this and it works and is fast.

NI software won't detect Multiple Ethernet Cameras

I have two identical Ethernet cameras which have been assigned unique static IPs. NI software (MAX, Vision assistant) will only detect one of them. Is there some special setup that needs to be done so that both are visible to NI software?

Yeah, let me clarify.
When using certain IP cameras with DirectShow drivers, MAX will treat the DRIVER as the camera, and not the device itself, and will therefore only show one device available. One workaround is to use a different driver, like the one I mentioned, to allow the second camera to be connected.
There may be ways of installing a second instance of the IP camera driver, but I am not aware.
This does not apply to USB cameras, which also use DirectShow.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

My ipad shut off and wont turn back on no matter how long it has been on the charger. help!!!!

no matter how long i keep it plugged into the charger for, it wont turn back on. ive even tried other peoples chargers just to make sure that its not a problem with myy charger! HELP ME!!!!

If it is not charging:
1. Reset iPad (may not work)
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air

How do I delete multiple photos with the new IOS 6 software?

I want to get some of my photos off of my iphone to get more storage space but going through my thousands of photos 1 by 1 is very tedious. I want to find the fastest way to remove the photos from my iphone.

There is no delete button in the newest iOS that I just upgraded to

After installing Maverick I can no longer highlight multiple emails the same way in orden out my mailbox I highlight a message,hold down my mouse and drag my cursor to highlight more messages. I click "delete" & they go to trash. How do I do this again?

After installing Maverick on my 2011 MacBookPro I can no longer highlight multiple emails in the same manner. To clean out my Inbox I highlighted a message, held my mouse down & dragged my cursor down through all the messages I wanted to delete (or move to another mailbox, or other functions) highlighting as many messages as I wanted. I then clicked "delete" & they went to trash. Such a great way to clean out a lot of messages at once. Can I and/or how do I do this again? Or is this something Maverick has eliminated? I also hate that "Notes" is no longer on the Mail page, but this is not as important. Help!!

Put differenltly, if I can drag select multiple items and objects on my desktop, which I can, using my Kensington Track Ball (which has an enabled updated software driver in place, so I don't think there's a problem there), why can't I click-drag-multipleselect emails in mail like I have *always* been able to? Really, what is the problem here? Why is that no longer possibler? I'm not a coder, but I can't believe this isn't fixable. Here, Apple should be ashamed of itself, regardless of the fact that there's an easy work around. When I have to alter the way I have been doing something for years and have to waste time learning something new and complaining about it -- like right now! -- and there's no good technical reason, and I bet there isn't, then Apple has simply failed.

Photo Page will no longer publish new photos

I have an Photo Album with with 12 Photo Pages. Total number of photos in the Album is 364. My newest Page will no longer publish new photos. The Album and Photo Pages, up to now, have been working fine. Is this a case of where I need to break up the Album Page.

The "empty cache" command is gone from the Safari dropdown but Option/Command/E still works and is in the develop menu.
A hard refresh (Shift/Command/R) has been missing for a long time - maybe V 4?
Safari is becoming more and more dumb with every update. I keep saying that its hardly worth testing in Safari since its a minority browser but does anybody listen?
Test your local version in Firefox and the one on the server in Chrome. See my last post in this discussion to see why you should use the error console now and again...
https://discussions.apple.com/thread/4361444?tstart=0

MP Navigator 2.24 is just ok for canon mp530 - better scanning software?

MP Navigator 2.24 is just ok so I tried 3.04
I found MP Navigator 3.04 from here
http://mac.softpedia.com/progDownload/Canon-MP-Navigator-Download-30529.html
when installed it said could not find correct drivers
I tried a few but they didn't work
so I had to delete and go back to MP Navigator 2.24
http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/pixma_mp_series/pixmamp530#DriversAndSoftware
From: Canon U.S.A. : Support & Drivers : PIXMA MP530
Location: http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/pixma_mp_series/pixmamp530#DriversAndSoftware
Info:
mp530osxsd12131ej7.dmg
MP530 Scanner Driver Ver. 12.13.1 (Mac OS X 10.2/10.3/10.4/10.5/10.6)
Q: Does anyone know how to get v 3.04 working on sno leo?
Q: Is there better other software that can work with canon mp530 for scanning?

i think this is what i have with Mp nav 2.2.4... (but didn't work with v3)
From: Starting download process...
Location: http://software.canon-europe.com/download.asp
Info:
scangearmp53012110.dmg
and ...
i see this - but i think it's old from 2007
Location: http://driverscollection.com/?
Info:
Click to download scangearmp530300.dmg
Message was edited by: revDAVE

Installed Mac OS 10.9.2 software, Canon MP 240 Scanner Won't Work

I installed the Mac software update to my MacPro laptop. My Cannon MP 240 print function works fine, but the scanner software gives me error messages no matter how many times I've reinstalled drivers. Any suggestions on how to get the scanning function including saving as a pdf function to work again. Thanks.
NancyCK

NancyCK wrote:
I'm trying to use the Canon's MP Navigator scanning application.
To use MP Navigator you must have the MP240 scanner driver installed. To check if this scanner driver has installed, open Finder and select Go > Go to Folder and enter /Library/Image Capture/TWAIN Data Sources then press Go. With the TWAIN Data Sources folder open, do you see a file called Canon MP240 series.ds. If not, then install the scanner driver linked to above.
NancyCK wrote:
I can scan from system preferences, but can't save and use for other purposes. Any recommendations on how to scan from System Preferences and then save as a pdf document?
This sounds like you have a permissions problem. Open Disk Utility, select your Mavericks partition and click on Repair Disk Permissions. When this has completed see if you can scan.
You could also try opening Image Capture and with the Show Details view selected, see what folder it is being scanned to and if that fails, then see if you can scan to a different folder.
And via Image Capture you also have the option to save the document as a PDF.

How do I download Canon MP Navigator EX 3.1 scanner onto my Mac laptop. the downloads aren't downloading. Thanks.

I am trying to download Canon MP Navigator EX 3.1 scanner onto my Macbook Pro with no luck.
I read there are difficulties doing this on Mac.
Has anyone found a way to do this?
Looking for help; thanks

You don't want to install that software anyway because it's not fully compatible with Mountain Lion.

Solution to canon scanner software not working

I have a Canon Lide 90 scanner, and had a heck of a time getting it to work.
The scanner came with bundled softare (Scan gear -the driver-, MP Navigator EX, Arc Soft photo studio, etc...) and even if I followed canon's instructions step-by-step, I couldn't get it to work with its own software.
The only thing that worked was to delete all other scanners that has been used on my computer.
How to do this:
1. Go to your hard disk
2. Open Library
3. Image capture
4. TWAIN data sources
5. 'move to trash' the other devices ( I had an HP scanner and 2 other Canon scanners listed in there...)
After I deleted the other scanners, keeping the Canon Lide90 I was using, everything started working perfectly. I didn't even have to restart or reinstall a thing!
Yours truly,
Relieved.

Nice bit of trouble-shooting. Thanks for sharing the final solution.

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software.

How to I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP or Navigator.

How do I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP Navigator.

Did you try scanning using Image Capture?
Otherwise, check the Canon website for updated software.

Acrobat X PRO no longer communicating with Canon MF 4100 Scanner In mid-process of successfully scan

Acrobat X PRO

There does not appear to be any drivers available for Canon MF-5750 for Win 7
Acrobat X, in Windows 7, must have current Windows 7 compatible drivers for the attached printer/scanner.
Without 'em Acrobat cannot 'speak' to the printer/scanner software.
Alternative - If possible, use attached device to output TIFF files from scanned pages.
Next, use Acrobat X to create PDF from the TIFF files.
Be well...

My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help!

Similar Messages

Maybe you are looking for