My Canon Pixma IP5200R will not power up.

I would like to revive the printer. If it is only the power supply, it could be replaced. What do you recommend?

Hi everyone,
Please try unplugging the printer and letting it sit without the power cord for at least 10 minutes. If this doesn't correct the issue, please reach out to our technical support team at http://bit.ly/Phone_Support for further support.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

My canon pixma mg2900 will not power up

I tested the wall plugg in for power it is good . made certin evarything was sacurly plugged in then left it unplugged for 24 hrs still nothing.

Hello. For assistance with this matter, please contact our support group. Use the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

Canon pixma IP4000R will not work with Snow Leopard

After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon. There are multiple problems ... the first thing I noticed is that not all of the printer options are available on the print dialog. When I tried to print, I got "fatal::internal error -9660."
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Anyone have any ideas? Other than buying a new printer ...
nojp.co.canon.bj.print.PrintSettings.BJThrougoutPage..b. media=na-letter PaperInfoIsSuggested..b. pserrorhandler-requested=standard sides=one-sided job-uuid=urn:uuid:f3c1ff27-c401-385e-4a60-d6659c8dcfff job-originating-host-name=localhost time-at-creation=1289542148 time-at-processing=1289542149 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 Duplex=None PageSize=na-letter"
D [12/Nov/2010:00:09:10 -0600] [Job 5] argv[6]="/private/var/spool/cups/d00005-001"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[0]="<CFProcessPath>"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[11]="[email protected]"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[12]="SOFTWARE=CUPS/1.4.5"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[14]="USER=root"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[17]="IPP_PORT=631"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[18]="CHARSET=utf-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[19]="LANG=en_US.UTF-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[20]="APPLE_LANGUAGE=en-US"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[21]="PPD=/private/etc/cups/ppd/iP4000R_00_00_85_4f_d4_8e.ppd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[22]="RIPMAXCACHE=8m"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[23]="CONTENT_TYPE=application/pdf"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[24]="DEVICE_URI=file:///dev/null"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[25]="PRINTER_INFO=iP4000R (00.00.85.4f.d4.8e)"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[26]="PRINTER_LOCATION="
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[27]="PRINTER=iP4000R_00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[28]="CUPS_FILETYPE=document"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[29]="FINALCONTENT_TYPE=printer/iP4000R__00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 4367)
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] PrintJobMgr trying ppc architecture...
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] fatal::internal error -9660
D [12/Nov/2010:00:09:10 -0600] [Job 5] End of messages
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state=3(idle)
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-reasons=none

Liz Gensheimer wrote:
After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon.
The driver version provided by Canon is v10.26.x while the update provided by Apple will increase the version to 10.30.3.0. The v10.26 and v10.30 drivers provide all the features that the previous v4.8.3 driver for OS X 10.5 and earlier provided. However the layout for these menus is definitely different.
Also, a lot of user who upgrade from a previous OS X may not realise that the default print dialog is in a minimised view. You need to press the disclosure triangle next to the printer name to get the expanded view.
When I tried to print, I got "fatal::internal error -9660."
I suggest you try a printer reset.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your iP4000R print queue but not the printer drivers. So you will only need to add the queue again.
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Yes they are both CUPS by name as they are both made by Canon. But this is not your issue. If you believe that a particular option is not available then please reply with what that is.

PIXMA MX892 will not power on.

My PIXMA MX892 suddenly stopped working. Upon further review, it has a power problem. I followed the procedure outlined on the help page: unplug for five minutes, try new outlet, and all that. Its symptoms are that upon plugging it in after its being unplugged for several minutes, lights momentarily flash (maybe one second or less) as if it's going to power up, but then is goes dead again. It acts like there's a little relay somewhere that's responding to a current overload or an overheat situation. Any suggestions?

My Canon MX892 abruptly stopped working yesterday also. The on button will not work at all. Barely 2 years old with very light use. I am extremely disapointed to say the least. I too have gone through the recommended procedures to 'fix' and have had no results. And of course, to make matters worse, this occured at a critical time when I happen to be on a presentation deadline. I have never had a machine that just flat out stop working without any kind of warning or precursor problems. I will try the service centre tomorrow to see if there is any help there.

Pixma pro 100 will not power up

My Pixma pro100 is 13 months old and suddenly will not power up. There are no unusual circumstances. Push the power button, & nothing!!! I've seen others that removed the power supply and re-installed as a fix, but that did nothing. Any other suggestions out there? The prints are absolutely beautiful, but to last only 13 months of light use is unacceptable. Please let me know if you have any suggestions, thanks!!

Thanks Patrick! Initial Call to Support (Sunday June 21, 2015) I initially called Technical Support on a weekend (Sunday 6/21/2015) and the technician logged onto my PC remotely, dug into system logs, and told me the problem was with my PC. His diagnosis and matter-of-fact attitude was the issue was with my PC and that my only recourse was to replace the printer. I kept telling him that the printer would not power on, even after changing the power cable with my other Canon printer, but he stuck to his diagnosis, the issue was with my desktop. I told him i had only used the printer occasionally printed about 30 13 x 9 prints but I had never had any issues. Fast forward to this week (Thursday July 23, 2015) I called during the M-F normal support hours, got a US based person who was the greatest and told me they would replace the printer even though it was out of warranty by about 3 months, it was still within the grace period. She has restored my faith in Canon Support and I learned an extremely important and valuable lesson; call during normal business hours and receive a US-based support person! Thanks Canon and kudos to my USA based support person this week!

Canon pixma mx850 printer not reading my computer - will not print

canon pixma mx850 printer not reading my computer - will not print
I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
I've tried all the trouble-shooting suggestions to no avail.

Hi scheideckerj,
Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing. Please click here to go to the Drivers and Software page for the PIXMA MX850. Once on the download page, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My Powerbook will not power up, but I can hear the fan running...

Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....

Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
Any answers to this yet? I think I'll call on this and report any success to this discussion.
15" PowerBook G4 Mac OS X (10.4.8) 1 GB DDR2 SDRAM, 100 GB HD

Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

Hello, I need some help.
I have a HP DM3-1130us Laptop that will not power on at all.
the only thing that happens when I plug it in is the power jack lights up.
When the power button is used absolutely nothing happens.
No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
just the light by the power jack that says the cord is plugged in.
The laptop has Windows 7, 320gb hdd, 4gb ram.
I have tried new power adapter and still nothing.
I have taken the battery out and tried and nothing.
I've tried the option where you take the battery out and hold the power and nothing.
I have tried with different hard drive and no hard drive and nothing.
I have tried reseating the ram and tried new ram modules still nothing.
So I am kind of stumped on what to do, the laptop will just not turn on.
Its not under warranty anymore so cant send it off.
It has not been exposed to any elements(extreme heat or water).
and its never been dropped or anthing.
Im kind of wondering maybe the power button board its self is bad?
If feels fine, its not loose or anything but could it
have just stopped working? for those who are not familiar with this model.
the power button is on the side and is a kind of drag and release button.
Its also on the same board with the Wifi button and 2 Usb ports.
But Im wondering before I buy a new one if this is what it could be.
Or could the motherboard its self be bad?
But even if the motherboard is bad would it still power up
just not post?
Also does anyone know of any other way to try to power this laptop up
without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
If anyone can provide any information I would appreciate it.
Thank you.

Hey Tyler,
Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
I hope this helps answers your questions,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My iPhone 5s will not power on and I need my serial number for support.

I am attempting to get help through Apple Support- Chat, but I need my serial number. It is not showing up in iTunes under the device preferences. Any other ways to retrieve the serial number through iCloud?
If anyone has any idea of what is going on with my phone, I would love some assistance. I live 45 minutes from the nearest Apple Store. Here's the situation:
About 2 weeks ago, my phone started shutting itself off and restarting randomly.
About a week and a half ago, I would randomly get a blue screen and then the phone would restart multiple times.
About a week ago I turned off Touch ID in an effort to resolve the issue, after reading some fixes from this community. That seemed to help. I do have the animation turned off, so I had read that there may be an issue between the Touch ID and animation reduction. If that had not helped, I was going to turn the animation back on.
Last night my phone seemed fine. I did hear it restart in the middle of the night once, but this morning it will not power on at all.
I tried connecting it to my computer through iTunes, but iTunes does not see it and I cannot access the device information from it.
My phone is less than a month old, and for the first two weeks it worked great. I am taking it into the AT&T Store today where it was purchased, but I don't really have high hopes for a resolution.
Any help is much appreciated!

Sorry AT&T store won't be much help.
I suggest you make an appointment with the Genius bar and then go to the Apple store.

Macbook Pro will not power on without battery installed

Hi there,
I have a Macbook Pro A1226 that fails to power on without a battery installed.
i.e. will not run off AC power on its own. I have tried 2 other power adapters, no change. All 3 adapters are outputting the correct voltage without fluctuations.
But, if I am in OSX with a battery plugged in, shutdown the laptop, remove the battery while AC is still plugged in, it will power back on without any issues. But as soon as I remove the battery, it will not power back on using just AC.
Is this an I/O board issue, or a mainboard?
I have power drained the unit and reset the parameter ram.
Thanks

Any update on this? This is the same thing that's going on with my laptop right now. I was at the Genius Bar and they said they can send it in for repair. Takes 7-9 days and costs a minimum of $310. At the time I was there, my computer wouldn't start up at all, because the battery had drained to less than 20%. It didn't even start with just the power cord (no battery in). The "genius" finally got it to work by doing a PRAM and SMC reset. Got home and was able to recharge my battery to 100%. Used my computer for 2 days before I dared to take it off the power supply. Lo and behold, as soon as I take it off the power cord, then re-connect it, it shows "Not Charging". I tried to do SMC again, but no luck. Keeps saying "not charging". Even tried with a brand new battery. Do I have to get the I/O board thingy replaced?

Ipod touch generation 5 will not power on

My ipod touch generation 5 will not power on though it was showing to b e fully charged. I have been pressing and holding the on button on the top which usually cause a the screen to light up. Is there some way to get it to work?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod touch will not power on or even be acknowledged by my computer when i plug it in, any suggestions to the problem

My Ipod will not power on, it is fully charged and if I plug in into the computer it doesn't even ackowledge it. Any suggestions?

Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Can anyone help us please?
I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Press and hold both the home button and lock button until the apple logo shows up.

My Canon Pixma IP5200R will not power up.

Similar Messages

Maybe you are looking for