My canon powershot SX2210 IS is not recognized. It was before I installed OSX!!

my canon powershot SX2210 IS is not recognized. It was before I installed OSX!!

graham135 wrote:
my canon powershot SX2210 IS is not recognized. It was before I installed OSX!!
Reinstall OS X in case you had a bad download or install on your previous try. Then test to see if the problem is fixed.
If you need to post back for other ideas, please tell us which specific Mac and Mac OS X version you are using. Also verify your camera's model number. The only one I could find by searching Canon's web site that is close to your "canon powershot SX2210 IS" is Canon PowerShot SX210 IS.

Similar Messages

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7
I just installed the new version of final cut pro 10 and the canon plugin-E1 version 1.4 for the canon 5D mk III but after starting final cut pro I can not find the Log and transfer button., with the result I cannot import my files.
Is there a solution for this problem.

There is no L&T function in FCPX.
The import media dialogue window does what you want.
OS versions later than 10.6 should be fine importing Canon DSLRs.
Russ

IPad is not recognized in iTunes. Just installed Mac OS X 10.6 and have a brand new iPad2. Tried all suggestions in the iPad manual without success.

iPad is not recognized in iTunes. Just installed Mac OS X 10.6 and have a brand new iPad2. Tried all suggestions in the iPad manual without success.

Quit iTunes, restart your Mac and then restart the iPad and see if the iPad is recognized after that. If not, you can look through these articles.
iOS Device not Recognized in Mac OS X
If you are running Snow Leopard 10.6 ....
Device not recognized after a restart
If either site gives you a "We're Sorry" error message - just reload the web page. The sites do work.

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Canon Powershot S2 IS no longer recognized by iPhoto

I have been unable to get iPhoto to import photos from my Canon S2 IS since the upgrade to 6.0.5. I have tried some suggestions from another thread -- running the 10.4.8 updater again as well as the iPhoto 6.0.5 updater again. Repaired permissions. Restarted of course. Reformatted memory card in camera. Tried different USB ports and cables.
I really don't believe the camera itself is the problem as it does appear on my husband's PowerBook (also running 10.4.8 and iPhoto 6.0.5).
Oh, and the Canon Image Browser is also not seeing the camera, but it does appear in the system profiler.
I'm at my wits end!!! Help? Please?
Thanks.
Power Mac G4 400mhz Mac OS X (10.4.8)

tulsamini:
Wow. You've answered nearly all the questions I was going to ask. What version QT are you running?
Try logging into another account on your Mac and see if the camera can be recognized there. If it is then there's an issue with your primary account. Also try booting into Safe Mode and again check to see if the camera can be seen in your primary account.
Booting into Safe Mode runs the File System Check (fsck) during the boot and only loads the basic minimum extensions, etc. needed by the system. See What is Safe Boot, Safe Mode? (Mac OS X). Again this will see if there's something that you've added that is causing the problem.
A workaround until you find a solution is to use a card reader. IMO, it's the best way to upload from a camera.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Canon PIXMA 860 and 560 not recognized by Image Capture

I can scan from the printers to my MacBook. And I go to System Prefernces / Printers and Faxes and both are shown as printers and as scanners. I can open from their and scan but when I open image capture it doesn't find any scanners.
I down loaded and installed both the newest canon printer and scanner drivers as well as the newest ICA driver. Still they are not recognized.
What am I missing?

ATC7 wrote:
Just for testing purposes, I removed the canon printer, removed all canon software and updates from my system and then used the original CD that came with my 870 to reinstall the printer and lo and behold, Image Capture started working again for wireless scanning.
Hello and thanks for the feedback.
There are two scanner drivers available for many of the new models of Canon AIOs. There is the ICA driver and the Canon scanner driver.
During my tests on clean builds of 10.6.x I found that my Canon AIOs were able to print and scan via wireless by simply installing the Canon update provided by Apple. This update consisted of the then latest printer driver for many models of Canon AIO and inkjet and the ICA driver. Canon's scanner driver was not included as part of this download from Apple.
The ICA driver is installed in HD > Library > Image Capture > Devices and the package is called Canon IJScanner1. Later versions of the ICA driver also installed another package, Canon IJScanner2. These ICA drivers provide a minimal amount of scanning selections and only appear to work with Image Capture and Preview. Other applications like Canon's own MP Navigator and Adobe Acrobat Pro will not scan with just the ICA driver installed. The Canon scanner driver for the respective model is required.
From what you have said and from my own testing I propose that the original CD did not contain the ICA driver but the Canon scanner driver for the MX870. And with only this driver installed you were able to scan using Image Capture via the wireless. I don't recall ever testing a 10.6 build where only the Canon scanner driver was installed and not the ICA driver (it is present by default on 10.6 but only has older models of Canon AIO's - your MX870 is not there). Had I tested this I believe that I would have been able to scan via wireless using Image Capture.
I also propose that once you installed the Canon v2.4.1 update, which contains a version of the ICA driver package that is also available from Canon web sites, then Image Capture stopped using the Canon MX870 scanner driver and used the ICA driver instead, thus stopping you from wireless scanning.
Right now I am using a new build of 10.6.6 on my MBPro. So that I could print to my MP990 at home and an MG6150 at work I simply installed the v2.4.1 update and have printer and scanner queues in Print & Fax for both. I have not installed scanner drivers for either device and at home with my MP990 Image Capture does not show any device being available, while Preview does show the MP990 once I select 'Import from Scanner > Include Networked Devices'. Also, Acrobat Pro 9 does not show my MP990 being available.
And with regards to the v2.4.1 update, the drivers included are provided by Canon to Apple, just as the other vendor drivers are provided to Apple, to make life easier for us Mac users. The drivers are available individually and get downloaded and installed automatically when the respective model is connected to the Mac and no local driver is present. As for the package including all these individual vendor drivers, this would be created by Apple.
Pahu

Iv'e upgraded my iMac to 10.6.8 and now microsoft office 2004 and my canon powershot camera software will not work. any suggestions?

I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8). The software for the Canon Powershot is Ver.37.2. Image browser 6.2 EOS utility 1.1. Any help would be appreciated.
Also if you could tell me what happens to the individual jpegs that get imported through iPhoto, I would go back to using that instead of the Canon software. I want to be able to go into a folder and see all the jpegs and not have to rely on iPhoto's one enormous file. What happens if that iPhoto file gets corrupt? Thanks, Leesha

Leesha wrote:
I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8).
Actually, Microsoft Office 2004 works fine with Snow Lepoard OS 10.6.x. However, it does require Rosetta, Apple's app for Classic apps. In your upgrade from Lepoard 10.5.8, Rosetta may not have installed but you can manually install it with the instructions here.
On another note, when upgrading the OS, some anomalies get resolved by repairing disk permissions with Disk Utility in the Utilities folder.
One more note, there was an issue with Rosetta crashing with OS 10.6.8 in February 2012. Apple released a security update that fixed it. You can see if Software Update (launch from the Apple menu) shows it or manually download Security Update 2012-001 v1.1 and install it. Software Update will also show other applicable apps available for updating for your upgraded system.
Rosetta is no longer available with OS 10.7 Lion and beyond. Then you will need to upgrade MS Office 2011 for Mac.
HTH

Canon powershot s110 power button not working

camera only turne on and off by inserting and removing the battery-power button does not work for intended use ? Canon powershot s110.

This sounds like the power button might be stuck in the on position. If the camera is new, this should be repaired under warranty. Has the camera been in any dusty environments lately? There may be some dirt by the power button that is preventing the proper operation of the power button. Has the camera been exposed to any dampness that might have shortened out the circuit board that has the power button on it? If so, that board/button combination would need to be replaced. I would have it checked out by an authorized Canon dealer to make sure of the exact problem and repair.
You could first try a reset of the camera in the menu options. You might get lucky.
Steve M.

Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS

I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.

Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Nano 7th is not recognized by windows 8 , re-installed i tunes 11... multiple times, nano 7th is not recognized by windows 8 , re-installed i tunes 11... multiple times

help with nano 7 on windows 8 welcome

Hey Brownalex,
I'd follow the steps in this article if your iPod nano doesn't appear in iTunes and also doesn't appear as a disk drive in My Computer:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Hope that helps,
David

HT201338 The adapter doesn't work (not recognized) and driver won't install on OS 10.8. What next?

I plugged n the GB Thunderbolt adapter in my 13" Air and it is not recognized. Trying to install theTB update I get the message that I need 10.7 but I am running 10.8.4. Help!

Hi,
I did install from the disk image you referenced and it worked. I still haven't been able to print wirelessly, but now that I have the correct PPD, I should be able to figure out the rest.
As for my OS, I misspoke. The PowerBook IS running 10.4.11. I work on a lot of different machines and sometimes I forget which was the latest build of the OS on the machine I'm working on at the time. Ah, the senior moments.
Anyway, thanks for pointing me to the download that solved the problem at hand. Now, on to the next issue ;-)
PrintDoc wrote:
Install an updated version of your CD from here.
By the way, i
s there a specific reason that you have not updated your Mac OS to the latest version (10.4.11)?

Time Machine Not Recognized After Clean Snow Leopard Install

I've searched for this particular question.
I was unhappy with Snow Leopard dragging. I wanted a clean install. I did not have the original snow leopard installation for my computer, so I got a different snow leopard DVD. This has apparently caused problems with time machine.
The clean install in complete. I am now ready to migrate my Time Machine backup onto my iMac24". However, Time Machine is not recognized--at least not in the way I want.
When I plug my time machine HD into the USB, snow leopard asks if I want to use this for future back-ups. I decline, because I specifically want to restore what has already been backed up. The HD is visible as an external device--and I can in fact see the raw data of my time machine backup stored in folders.
However, when I enter migration assistant, time machine is invisible. On the page where I am expecting to select time machine, I instead get a perpetually spinning circle icon.
I suspect time machine is "linked" to the prior snow leopard operating system, rather than to the computer ID. Obviously, this is a bit of a mistake on my part. However, I'm already into the breech and I've got no choice but to go forward.
Please advise how to redirect my time machine to its new master (same computer, different snow leopard registration)?
Thanks so very much.

Retail disk? Yes, it was the snow leopard CD.
I used a single license snow snow leopard CD install the first time around, when snow leopard was first released. At at that time I "upgraded" my system from leopard.
This time, I used a different physical disk with snow leopard with a family license. This time I did a "clean" install in which I first erased my hard drive using disk utilities.
There were no problems with the installation.
As I say, my time machine hard drive is "recognized" by the computer as an external drive. It just is not recognized when I utilize the migration assistant. It is also "recognized" as a time machine, but only as a potential time machine for prospective use to update going forward, whereas I want it to open up as a time machine for my iMac that I just wiped clean yesterday.
Thanks for your assistance.

Canon S95 CR2 raw files not recognized

I just bought my wife a Canon S95 specifically because it could produce raw files. I just tried to import her first pictures using Lightroom 3.2 and CR2 files are not supported. Silly me I did not check the supported camera list. The S90 is there but not the S95. When do you think Adobe will get around to supporting this camera?

Hi Amir
>As suggested above, use ExifTools. After downloading it, you can simply run (under windows):
thanks it worked great with a Mac as well, within terminal. I added overwrite to remove the original ( I had already made a copy)
exiftool "-CanonModelID=PowerShot S90" -overwrite_original /Volumes/DRIVE2/CanonS95/folder1 (wherever your files are located)
here's a link to more exiftool info if anyone else wants to give this a try.
http://www.sno.phy.queensu.ca/~phil/exiftool/install.html
thanks
j
Jeff-
>In general, ACR/LR gets updated 3-4 times per year based mostly on the number of new cameras released in a time period.
thanks for the info, is the process of adding new cameras very involved, or are the delays because of difficulty getting raw data from the manufacturers?
j

My Canon PIXMA MG5420 printer is not recognized by my Mac nor my Dell.

This is item is brand new and has been inop for the last 3-4 weeks as I did not have time to address this issue. Sadly, the item sat boxed for 2 months or I would have returned it immediately. Beyond irritated and frustrated! Any ideas on correcting this connectivity issue?

Hello,
We appreciate your reply, and apologize for any inconvenience this issue has caused for you. We do hope someone in the community will be able to help with your PIXMA MG5420. If this a time-sensitive matter, we'd suggest reaching out to our technical support department at http:bitly.com/ContactCanon.
Please note that the forums aren't meant for immediate technical assistance (per the forum guidelines), but are designed to allow the community to help each other with issues encountered or tips they'd like to share along the way.
If you've come across a problem that requires urgent assistance, we'd recommend contacting our technical support team by phone or email through the link above (or just click HERE).
We hope this helps!

Camera not recognized. Was up to a few days ago

I've been using a Canon video camera FV-M10 mini-DV for live video (Skype/iChat) and also for importing video (mini-DV cassette) into Final Cut Express, After Effects or iMovie up until a few days ago. Then all of a sudden (my MacPro) nor any of the software can recognize my camera anymore. I can't recall if this came after the last security up-date from Apple a few days ago. But, I've tried everything. Both Firewire and USB connections using a few different cables. In Skype...(sometimes) it automatically shows the FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. Any ideas? Geez, I'd better check my Sony WS5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the Firewire connection. Anyone have any ideas? Please Help! Is this an issue with the new Apple Up-Date?

Hi,
Most computers with front and back Firewire and indeed USB ports have different controllers for them inside.
A look in the system Preferences should confirm this (Listed as Buses at least)
My USB layout
Often Shutting down the computer with all periferals unplugged (cable wise) and waiting 15 minutes will get the ports and controllers to reset.
It may pay to try this.
Where the App is should not matter in this context. (It does for Updating purposes)
Is this a camera that can play back other media/Devices and convert it in to DV for onward Firewire connection to the computer ?
Sometime they store in one format and can output in another. This allows them to act as DV converters.
This may bear some impact on the settings on the camera.
You said the Computer has 400/800 ports.
Do you mean it has one of each ?
Or do you mean you are using an Adapter and running some devices at 400 and some at 800 ?
It is likely that the camera is neither (System Profiler should tell you)
You seem to be clearly saying nothing has changed from when it worked
I am just exploring ideas.
Is there any chance the Scratch disk is nearly full and is sending lots of data back and forth to see what it can drop/lose?
Has the app that uses it been shut down recently.
Have you increased the number of Undos that it can do ? (This will store more Scratch data)
Have you stored anything else on that disk that is in use or takes up a large portion of the space ?
9:03 PM Sunday; April 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
>

My canon powershot SX2210 IS is not recognized. It was before I installed OSX!!

Similar Messages

Maybe you are looking for