My Canon printer doesn't work after updating

Hi everybody.
Everytime when I update software, my printer doesn't work. I use Canon i-sense lbp3010b. For example, when I try to print out a document, I press the PRINT button (in any application) and it opens the printer application. It shows the message "Printing…" for some 3 minutes, then shows "Paused". I try to resume the process, but it doesn't help-the same scenario, again. Once, I have another problem on printer, which printed only graphics, not text. I solved this problem downloading the printer driver from canons austrian web-site, but it doesn't help either anymore.

Might be best to delete device driver for printer before updating. Then try setting your printer up afterwards. The update may have some compatibility issues. I'm sure there will be updates and bug fixed in the near future. There have been a lot of issues with the recent lion software updates especially. Best thing I can say is be patient and make sure you submit this issue to apple.

Similar Messages

My E-Mail Accounts Pop3 doesn´t work after update Lion

My E-Mail Accounts Pop3 doesn´t work after update Lion.

Same here,and Apple support did not have a solution!!

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

hi Mr.Sianpu
nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
thanks

I4 push mail doesn't work after update

My I4 push mail doesn't work after iOS 5 update. I have a mobileme acct and the settings show mail set up for push. Any thoughts?

Hello amishnik,
Thank you for your question regarding email on your BlackBerry PlayBook tablet.
Have you restarted the device and verified that the device is still connected to Wi-Fi? Are you able to browse the internet? If not, try this and let us know the results including any error messages.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

Printing doesn't work after 10.1.3 update...

We did a deployment with System Center 2010 and the majority of our workers cannot print from the reader.
The solution for now is deleting their profile. As you might imagine it's not a great solution.
We didn't had any issues with the 10.1.2 but now we do... you say the printing issue is fixed but for us the printing issue just started after 10.1.3.
Anyone found out which file \ configuration \ registry key is making this happen? We tried deleting the adobe reader folders inside the user profile but didn't solve the issue.
Thanks.

Any update to this? I have the same issue with 10.1.4. If I disable protected mode it works.
Also other users on the same machine can print the same PDF with protected mode on.

Touch id doesn't work after update ios 7.1 APPLE PLEASE HELP!!!

Touch id scanner dead after update 7.1. Tried remove fingerprints but cannot add new fingerprint because the touch id scanner DEAD. Tried rebooting the device and touch id scanner still doesn't work. For somehow the scanner works when the iphone is charging even it works slower than before the ios 7.1 update. APPLE PLEASE FIX THIS!!!
FYI : I am not going to try backup and restore my 5s, for the last time i bought this 5s i already tried for 2DAYS and cannot restore my old iphone 5 data to my new 5s!! I give up and lost all my DATA! Cannot find any answer from apple support. REALLY DISSAPOINTED WITH APPLE!

https://discussions.apple.com/message/25162081#25162081

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

Home sharing doesn't work after updating itunes to 10.6.40

Hi
Just update my itunes to 10.6.40 and ipad1/iphone4 to 5.1.
The home sharing doesn't appear after enable it and both remote app (ipad and iphone) don't work!
Now, my ipad doesn't sync thru wifi and my iphone 4 sync thru wifi even when not charging.
Please help
Regards
Pedro Silva

Thanks! I didn't realise there was a specific forum for Home Sharing... found it now and will repost there.

Printer & scanner not working after updating to 10.6.6

Canon ip4500 printer no longer recognised by computer since I updated to OS 10.6.6. Tried deleting & adding it but it cant find printer. No drivers to update either. Tried disconnecting & connecting via USB. Nothing is working. Same with scanner that I use with Vuescan. Help!

fenmax wrote:
Canon ip4500 printer no longer recognised by computer since I updated to OS 10.6.6. Tried deleting & adding it but it cant find printer.
"Can't find printer" may be the operative phrase here. How is the printer connected, and what happens if you unplug it and plug it back into that connection?
No drivers to update either. Tried disconnecting & connecting via USB. Nothing is working. Same with scanner that I use with Vuescan. Help!
This is sounding more and more as if it's hardware, and USB to be specific, assuming that both devices connect via USB. Are you having any other connection problems? What happens if you change the port you're connected to? Are you using a hub, and if so, is it a powered hub? If you're using a hub, what happens if you plug the device directly to the Mac?
And, oh, yeah, one more thing: what happens if you reboot the Mac?

Lightroom doesn't work after update to CC 2014

After last update to CC 2014, Lightroom doesn't work for me. I use Windows 8.1

kmvereb - Don't accuse me of lying, OK? It works fine with penderra's instruction.
1. Close Adobe Creative Cloud completely.
2. Empty the folder: C:\Program Files (x86)\Common Files\Adobe\SLCache
3. Launch Lightroom - you should be asked to Sign in to Adobe CC.

Auto-lock doesn't work after updating iOS 6.

I'm using iphone 4s. After updating iOS 6, the auto-lock function doesn't work anymore. I left it for 10 minutes and when i came back, the screen was still on although the auto-lock time is 2 minutes. I tested many times, tried to reboot but it didnt help. But the screen auto-lock is still working. Does anyone have problem like me and know how to fix it ?

Are you using Assistive Touch?
See this thread:
Re: IOs 6: Auto Lock Bug iPhone 4S (Updated)

Widget doesn't work after updating to OSX 10.6.8

After installing the latest batch of updates, my sudoku widget doesn't work anymore. Anyone else having a problem like this, or know how to fix it?
I noticed on the website which created it that others are also having this problem in the last few days:
http://briandeboer.com/posts/sudoku-20-approaching-beta-status/
Thanks!

Someone posted the following on the Sudoku widget website:
"Just wanted to add to my previous post. This widget uses images “.png” files so the font issue has not affected it’s performance. After some digging I found WebKit2 was bundled with the latest Safari update (5.1 and 5.0.6). WebKit2 uses a whole bunch of new APIs rendering some old ones obsolete. My guess is as good as yours, but most likely the SudokuC controller inside the widget is referring to one of those obsolete APIs."
Does anyone know what this means, and can explain it to someone, like myself, who is not a programmer?
Also, does it seem like a relevant solution and/or cause of the problem?
Thanks!

YouYube doesn't work after updating to 2.2

Does anybody know how to fix this? After I updated my iPhone 3G to 2.2 YouTube search started showing "Cannot connect to YouTube" error.
I have Finnish language set. When I change the phone language to English it works! But when I change it back to Finnish, it shows the error message again (but now in Finnish "YouTube ei ole käytettävissä.")
The phone is NOT jailbreaked!

Define "doesn't work"? That's an extremely vague explanation which makes offering suggestions difficult.

My Canon printer doesn't work after updating

Similar Messages

Maybe you are looking for