MY CASIO G'ZOne,s inside screen, reversed images,backwards and up sidedown.

IT NOT ONLY DOES THAT BUT IT ALSO GOES TO A BLACK SCREEN. THIS HAPPENS ABOUT EVERY TWO OR THREE DAYS. I HAVE TO TURN IT OFF AND THEN TURN IT ON AGAIN,WHICH TAKES FOREVER,SO I CAN READ THE SCREEN.IS ANY ON ELSE HAVING THIS PROBLEM? ALSO THE VOLUME GOES DOWN EVERY TIME I HANG UP A CALL. I LOVE THIS PHONE AND TAKE EXCEPTIONAL CARE OF IT ,NO DROPS,NO WATER.I KEEP IT IN A CASE. FOUR MEMBERS OF MY FAMILY HAVE THE SAME PHONE WITH NO ISSUES. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

This is a real head scratcher, RUMLESTILSKIN. It sounds to me like you have a defective device. Under these circumstances we can replace your phone for no cost if your device is still covered by the 12 month warranty. Please follow me, ChaunceyM_VZW and send me a direct message. Be sure to include your contact number and the best time to call. Have a great day.
Chauncey_VZW
Please follow us on twitter @VZWSupport

Similar Messages

Casio G'zOne "package file is invalid"

I just bought the Casio G'zOne and everytime I download an ap for it I get "Package file is invalid". I use Play Store to get the ap. I tried clearing the cache and data for Play Store, I turned the phone on and off, I took the battery out of the phone and turned it back on, I looked for System updates and downloaded any updates needed. I bought 2 of these phones. Both work perfect for everything except for downloading aps. Is there a software update I am missing or are these phones too old to get newer aps. Aps I have been trying to get are Words with friends, weatherchannel, Angry Birds, etc. It seems that if I keep trying, then one of the phones will finally successfully download the ap and work. But I watch my nieces with their Droid and Samsung Galaxy and they don't have any of these problems. Any help would be apreciated.

Thanks for all the help. I talked to my Verizon dealer the other day and after I left them and got back home, I realized what the problem was. My WiFi was causing the conflict for some reason. My verizon dealer said some phones were not able to use the wifi to download aps or the wifi wasn't a good enough connection. I turned the WiFi off on the phone and everything worked using 3G. So I did get my 2 phones to download aps. Thanks for all your help on this issue.
I did have one other question. Is there a way to set my time manually on my phone to a different time zone? I live on the border of a time zone and the towers I use are both on central time, where I live on mountain time. My old flip phone allowed me to put the current time zone time and also the Denver time - both at the same time. I mostly work on the mountain time zone, but I do cross into the central time zone, so that really worked good on my flip phone. But my new phone says "automatically set time" and I cannot control how the time is shown on the screen.

Dust inside Screen, any experiences (and my story)?

I have a late 06 17" MBP that has exhibited dust inside the screen for about 6 months now. I haven't had a good time to take it into the apple store until yesterday (since I knew it would have to be sent off and I'd be without for a week or so). I know its dust and not dead pixels because of the fact that when it first happened, if I closed the screen and walked around with it in my bag, the spots would have moved when I reopened, some would appear farther up the screen, some closer to the bottom, and maybe sometimes 1 or 2 of them would disappear. All in all when I took it in, I had about 20 or so spots that make looking for dust in my Canon 1Ds pics, a frustrating practice at best.
So anyway, I make an appointment and speak to a Genius, he sees the issue clearly, and of course says he'll have to send it off, but tells me that they may not cover this and call me with a quote to replace the screen, but he'll write it up as if its covered and see if they come back with something different.
What I don't get is how this could not be covered. I've owned several laptops, for years, 2 dells, an IBM, a 17" sony vaio, 2 gateways, a toshiba, etc, etc, etc, pretty much all laptops for the past 10 years in my house. NONE of these have ever done this, all obviously in the same environment. How could this not be a defect thats covered under my apple care agreement (expires 1 year from this December)? But I'm getting ahead of myself, as far as I know at this time, it will be covered, but I will keep this thread up to date.
Here is what the Genius wrote down for my order:
A. Customer Issue(s): Small dark spots at the bottom middle of screen
B. Steps to Reproduce: Verified at the bar
C. Troubleshooting: N/A
D. Time to failure: N/A
E. Unsuccessful Fixes Attempted: N/A
F. Cosmetic Condition at Genius Bar: Slight dent on back left corner and screen does not sit flush
G. CS Code Number: N/A
H. Configuration: MBPRO 17/2.33/2G/160/256VRAM/SD-DL (even though I have 3gb in it, but not from the store that way)
I. Password: N/A
J. UserName: N/A
K. Known Liquid Damage(Y/N): None evident
L. Other Notes: N/A
I know I've seen other posts about this dust inside screen issue, has anyone ever been denied a repair for this while under warranty?
And one more question, apparently these LCD units are not factory sealed? If this dust came from my environment, and did not originate from within the panel (thus not covered), is there anyway (if it comes back not fixed) that this could be cleaned out? I mean if it gets in there, there has to be a way to get it out right? I hope to write back soon with good news that its all covered, but just in case I might as well start looking at options, (geeze I'm such a pessimist)
I'd love to hear if anyone has any similar stories.
Thanks!

That seems logical. If there is some small opening in the bottom to allow air to get inbetween the top and a lower layer inside the lcd panel, then it might not be possible to open it up to clean it out. I'm hoping that if its not fixed by apple, that there might be a way to do just that, regardless or risk of breaking the display. If I did break the display, I'd have to buy a new one, and if they don't fix it I'll have to buy a new one, so either way... I might just have to be the first to try such a thing, who knows, might be able to fix it myself...
And as far as being negative, no worries, I'm negative enough for all of us, or should I say scared my favorite laptop ever (and most expensive) won't be fixed...

I am trying to transfer my contacts to my iphone from a Casio G'zOne phone but I keep getting Connection Unsuccessful. How do I transfer the contacts?

I am new to Apple products and I am trying to transfer my contacts to my iphone from a Casio G'zOne phone but I keep getting Connection Unsuccessful. How do I transfer the contacts?

How are you trying to transfer them? Via Bluetooth? If so, that will not work.
You need to get the contacts from the Casio phone into a supported contact manager on your computer (Address Book/Contacts on a Mac or Outlook on a PC) then sync them to the iPhone via iTunes or iCloud.

Does apple fix an ipod under warranty if the inside screen was slightly cracked even though you cant feel the crack because its on the inside.do they fix that????

Does apple fix an ipod under warranty if the inside screen was slightly cracked even though you cant feel the crack because its on the inside.do they fix that????

ONLY Apple could answer this.
If they determine that the ipod is defective, then warranty will cover it.
If they determine that it is damaged, then the warranty will not cover it.

I have an ipod nano and its fall down , the inside screen is broken..... can APPLE replace this(inside screen)???!

i have an ipod nano and its fall down , the inside screen is broken..... can APPLE replace this(inside screen)???!

Hello Alia A,
Sorry to hear about your iPod nano screen. I recommend reviewing the following link for service options (you can update the country selection to your location after accessing the link):
Service Answer Center - iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Thank you for using Apple Support Communities.
Best,
Sheila M.

Nokia 9300i inside screen not working?

the big inside screen lights up but doesnt display anything, any ideas?

Did you buy it now?
Is it new?
Since how long you are using it?
Did it fall before the problem started?

Casio G'zOne V-Type Freezing Up

I've have had the Casio G'zOne V-Type phone for years and its worked great. The phone is freezing up while " Registering Applications".
Removing the battery does not help. Can this be resolved with a new firmware update or through any other means?
I would hate to give this phone up and would really like to save it if possible.

Hello Bill,
Your device freezing can certainly be frustrating. There will not be a software update for the Casio G'zone V. I recomend to try a hard reset which may correct the issue with the freezing. To do a hard reset follow the steps below:
- Settings & Tools
- Phone Settings
- Security
- Hard Reset
Please be sure to back up your contacts first before completing the hard reset. Click this link on how to back up your device with the Backup Assistant: http://support.verizonwireless.com/how_to_use/backup_assistant_before_share.html
Once you complete the hard reset, dial *228 + Send and choose option 1 to program your phone. Then restore your contacts with the Backup Assistant.
Thank you,
Lena A.
Follow us on Twitter @VZWSupport

Dirty inside Screen late 2012 imac

Hi
I have an iMac 21,5", late 2012 model.
I have noticed that the lower left part of the screen has some yellowish rays. About 1 inch wide, 2-3 inches long, going up toward the center of the screen.
Obviously have have cleaned the screen on the outside, and the smudge is clearly not on the outside.
I have attached a photo that illustrates the problem.
Would any of you know what could be causing this?
I was also under the impression that the screen was sealed around the edges.

Klaus, yes, I do intend on doing that.
I have heard that the late 2012 imacs have the front glass and LCD display fused and sealed together, so that it is to be 100% air tight. I wonder if this is really true...

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

Problems with screen saver image quality

Just got a MPB 15 inch. Very happy with it but have a small problem with the screen saver. I use my i Photo folders as the source for screen saver images. Some photos are shown in very good quality but others are very poor - as if low res. The original images are all of the same high quality. Seems to occur whichever video setting is used under power saving. A minor issue I now but any ideas?

Hi, Mark. Apparently some of the photos being used are low-resolution thumbnails, not full-resolution images.
What version of iPhoto do you have, and which OS version are you running? On my MBP running 10.5.6 and iPhoto 7.1.5, "All folders" is not an option in the Screensaver pane of System Prefs, so I don't know what you're actually choosing. But if I select "Pictures" (which refers to the Pictures folder in my Home folder), then the screensaver uses every .jpg file that it finds in any of the several iPhoto Libraries inside my Pictures folder. The thumbnails created by iPhoto are .jpgs, so they get used by the screensaver along with full-size high-resolution images.
The solution is not to select a folder that contains any thumbnails.

Full screen caller image display

Full Screen Caller image was one of the best feature of an iPhone that made look iPhone simpler and fantastic to use..
This particular feature seems to have been last with the upgrade to iOS 7.1..
Please fix this issue..
Full screen caller image display makes the phone look beautiful and wonderful when a known person is calling

I agree with you on the full screen view for when a users contacts call them. I hesitated upgrading, Apple has now joined the ranks for screw-ups! Since the late Steve Jobs left this earth, Tim Cook has royally screwed-up this company! Customers here in th U.S and arouund the world are the ones shelling out hundreds of dollars for a product that is the best next thing to revoluntionize the way we communicate with others. But it seems that $600+ dollars gets us junk and a device not tailored to us, the users. I want to call them "M!cr0$oft Apples!" Give us the ability to go back to iOS6. Let us choose! We the customers have made this company rich, full of wealth beyond their greedy little hands. Give us the ability to choose what OS we want to install. Their should be a transparency relationship between the customer with the money, and worker who will work for us to render a product that we "the users," want" and not want a senior desinger assumes we think is good. Remember, this is all thanks to a legend who we all know and respect as ("in my own opinion), the father of modern communication Steve Jobs. SJ worked till his last days here to creat a masterpiece, T.C came on board and took a huge "memoryDUMP," and disregarded his visions. If your passionate like me about Apple and what Steve Jobs stood for, then help me create a petition to make this company see that we "The customers are ALWAYS right!"
Missing and need back:
Transparency on the dock and icons
Working Wifi, and imessage
Better Battery life!!!
Reverse the icons back to iOS7.06
Fix maps
Unless the designers are gothic in nature (I love Goth!!); dont make our phone dark and heavy on the fonts.
I dont know about you, but I' am tired of hearing excuses from Apple and its CEO!
PRETTY MUCH, REVERSE THE UPDATE OR WE WANT OUR MONEY BACK!
As th general public alredy knows, Apple will never listen or read these suggestions" They sleep soundly in thier 2.5millon homes, and respectively. Why care about those people that are paying thier salary pretty much! Listen up board of directors.....Fire Tim Cook, Hire a go-getter, Micromanage manic that will continue Mr. Jobs legacy and nip this disaster in the bud! Tweet this, FB this! Let make the world realize we will not take it anymore! Fix the dam problems!

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

Just got a 5C, is it normal that when you transition from Siri to calling someone that the symbols along the top or screen go all feint and blurry?

Just got a 5C, is it normal that when you transition from Siri to calling someone that the symbols along the top or screen go all feint and blurry?

I have one it works fine. yeah, the Mac instructions aren't great. Try this.
(1) make sure you have your VCR audio and video outputs connected to the side with the two selection switches.
(2) be sure you know the difference between the audio and video outputs no matter which colors you use.
(3) make sure the indicator light is green on cable that connects to your computers firewire port.
(4) when you operate the vcr through Imovie. you will only be able to play your vhs tape. so to fast forward or reverse. you must use your vcr remote or your hand.
(5) to import your footage just click on import in imovie.
That should solve your problem. Also, in the future put these questions in the imovie forum.
P.s. if this is helps you give me a vote or two. LOL
anymore questions email me

MY CASIO G'ZOne,s inside screen, reversed images,backwards and up sidedown.

Similar Messages

Maybe you are looking for