My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone
My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone. Any suggestions?
Thanks.
sorry. seems to be resolved.
Similar Messages
-
My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ? All of the other services work correctly.
Apple already have a position on such matters. If you have a problem with one particular service and not others, contact the provider.
Contact Apple TV content providers - Apple Support
However, 3 similar reports, do not a problem make. Perhaps there is a problem, perhaps there isn't, but it really doesn't seem to affect many people if there is, believe me when there is a problem it's quite obvious from the additional traffic it causes in these communities. It's also not exactly clear that you are all seeing exactly the same thing. -
HT201401 my new iphone 4s seems to have just stopped working.
Nothing is showing up on the screen when I touch the home button or the power button. Could I have turned on/off a screen dimmer by chance? This just happened out of the blue. One minute it was working; the next minute nothing. I haven't dropped it, gotten it wet, or anything.
Apple already have a position on such matters. If you have a problem with one particular service and not others, contact the provider.
Contact Apple TV content providers - Apple Support
However, 3 similar reports, do not a problem make. Perhaps there is a problem, perhaps there isn't, but it really doesn't seem to affect many people if there is, believe me when there is a problem it's quite obvious from the additional traffic it causes in these communities. It's also not exactly clear that you are all seeing exactly the same thing. -
we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?
Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop. Last week they stopped synching...I can't upgrade past OS 5.1.1. b/c of memory (1st generation iPad and iPhone 4s). Could this cause the problem after the release of the new OS?
Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings. -
ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner
Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.) -
My Mac desktop went offline and printer stopped working
My Mac desktop went offline and printer stopped working. I have attempted everything I can do, without luck. When I attempt to reset my belkin router, the mac will not accept my password. My PC, set up 3" away, is online. HELP
It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
IPod seemed to freeze and stop working
I got ipod 30G, my iPod seemed to freeze and stop working when i play it for a few songs. I need to restar or restore to get my ipod back to normal. anyone know what cause this problem?
If you have to go through either a reset or restore frequently, then it's best that you send it for service.
http://depot.info.apple.com/ipod/ -
Laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?
laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?
Hello jamdizzle,
Welcome to the HP Forums!
I understand the touch pad on your notebook has stopped working. I will help you out the best I can!
I do have a workaround that may work, if you wish to try it:
1. Go into Device Manager, then Mice and other pointing devices.
2. Right-click on the mouse driver, and select "Uninstall".
3. Restart the computer. This will force the computer to install a driver based on the detected hardware.
This should resolve the issue. If not, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Mario
I worked on behalf of HP. -
My question mark and forward slash key have suddenly stopped working. Have I pressed something I shouldn't have. Any ideas what to do.
judith147 wrote:
My question mark and forward slash key have suddenly stopped working.
If they do nothing at all, double check system preferences/speech and make sure they have not somehow gotten set as the trigger for Text to speech or speech recognition, etc.
Also try an external keyboard. If it works ok, then your internal keyboard is probably damaged and needs repair or replacement. -
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808 -
I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.
Hey hughborg25,
I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
I would go through all the steps listed there, and the issue should be resolved by the end.
Live long and prosper,
David -
Some commands have suddenly stopped working, e.g.; move to, open with now give no list of options
in pnotoshsop CC some commands have suddenly stopped working e.g.; move to, open with provide no list of options
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I finally managed to get through the process of moving files and catalog from Lightroom 2.7 on a PC to Lightroom 4 on my Mac. I think I did it all correctly and all my file and previews and some tagging seems to be there. Two things are lost
1 - Most importantly, the development history on my files. I can see the edited versions in the previews, but as soon as I click on it, I can see that I lose all the changes I had made before. When I look at Development history, it just says "Imported on...." I'd love to get this back. That is a ton of processing work just lost because I switched computers.
2 - The collection names seem to have come over, but they are all empty. This is also a lot of work lost, though not as important as #1
Is there any recourse?For iTunes Help
Add artwork to songs and other items
Music and video you buy from the iTunes Store comes with its own artwork. You can add your own artwork to songs and other items in your library.
You can add many popular types of still image files, including JPEG, PNG, GIF, TIFF, and Photoshop. You must convert WAV files to another format before you can add artwork to them.
Album artwork for the currently playing item appears to the left of the progress bar. To view album artwork at a larger size in a separate window, click the artwork.
Hide
Add artwork to music and video
Do any of the following:
Add artwork to one item at a time:
Select an item in your iTunes library and choose File > Get Info.
Click Artwork and do one of the following:
Click Add, select an image file, and click Open.
Drag the art file to the artwork area.
To add artwork to another item, click Next or Previous.
Add the same artwork to multiple items: Select the items, choose File > Get Info, click Info, and drag an image file to the Artwork area.
Retrieve album artwork for songs in your library from the iTunes Store: Control-click the songs and choose Get Album Artwork from the pop-up menu. -
My Mac Mini, which I bought last December 2011, seems to have slowed a bit. Is there something I can do to tune it up to get it to run faster?
Hi Annie,
Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?
Maybe you are looking for
-
Hi All, I have a confusion regarding physical and logical length in ODI file datastore. I have a fixed width file where a col c2 had datatype as string(30). I defined that column in datastore as string>Physical length 30 >Logical length 30 My interfa
-
Sending Email command line option to save
Hey Can anyone tell me if I use "-emsave=yes" where it saves the email to? Cheers
-
10.8.4 Finder freezes since upgrading
Ever since upgrading to 10.8.4, my MacBookPro freezes. At first I thought it was the back up device, but even when that is not running, it still happens. I don't know if it is just the Finder freezing everything or an application like iMail. When it
-
Diference between Service tax and GTA service tax
Hi, Kindly tell me what is the difference between service tax and GTA service tax and their accounting entries in SAP ? With Regards, Samrat
-
Hello! I am new to this server. I have installed the flash media server2 but i could not run an application. I want the complete procedure to make use of this server. If you can help me in this regard plz help me as early as possible. I want the comp