My CD Drive (:E) Isn't Detecting Any CDs...

yup...my PC has 2 CD drives, one for reading only and the other for reading/writing (burning). My first one doesn't seem to work anymore...now, I have to use my :F drive to rip CDs, play games, etc. and burn CDs. Whats wrong with my :E drive??

Oh woops...CD Diagnostics:
Microsoft Windows XP Professional (Build 2600)
Compaq Compaq PC
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARASPIWDM (2.0.4.3),
Video Driver: NVIDIA Vanta\Vanta
IDE\DiskST320423A______________________________3.39___, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskMaxtor6L160P0_________0000, Bus Type USB
IDE\CdRomCOMPAQSC-140S__________________________SE04___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLGCD-RW_CED-8120B______________________1.00___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
F: LG CD-RW CED-8120B, Rev 1.00
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive F: LG CD-RW CED-8120B on CDRW media at speed 0X.

Similar Messages

IBooks isn't reading ANY cds

Able to open cd drive properly (for a change), however iBook isn't reading disks. Doesn't even make the spinning sound like it's trying to read. I just close the drive and nothing happens. Any suggestions??? Thank you.

when you open a Finder window does the CD show up there? If so, can you click on the cd and see a list of track names? Try right clicking on a track and scrolling down to "Open With" and choose "iTunes".
Another thing you might try.. open a finder window. click on View and scroll down to View Options. Make sure "Show Preview Column" is checked.
If the CD does show up in preview and you can see track names when you click on it, you should get a mini player in the preview column. try playing it there.
Try this too. In Finder, on the menu bar click on Finder. Scroll down to Preferences. Click on General. Where it says "Show These Items On Desktop", make sure CD's, etc. is checked. Does your cd show up on your desktop?
Then there's always the old standby.. create another user and then log in as that user. can you play the cd there?
You wrote that you were able to open the cd drive properly "for a change". I take it you've had problems with that. I'm not a mac guru but it sounds like you might be having cd drive problems. I'm not real sure how to fix that.
If none of these suggestions pan out then you might try posting this message in the Mac OSX 10.3 area. The ibook dual usb area doesn't seem to get as much traffic. Or, even though you don't have a Mini, you might try posting it there. Lots of basic OSX discussions there.

Dual monitor screen isn't detecting any signal!

Hello
My computer doesn't have any VGA ports, so im using an 3.0 usb to VGA adapter. Whenever i plug in the adapter, the second monitor detects no signal, and also having trouble with screen resolution for the second monitor is it because of the adapter?

Hi,
What is your USB 3.0 adapter ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe Acrobat 9 Pro - Form Wizard isn't detecting form fields?

Hi there,
I've been scouring various forums, blogs, etc. to find an answer to my problem, and have yet to be successful. Here it is:
I've created a form in Illustrator CS5 using the rectangle shape tool to indicate form fields. I need users to be able to enter information in each of the specified fields. I've saved the file as a .PDF and have opened it into Adobe Acrobat Pro 9. I then select "Start Form Wizard" from the Forms menu, and after making the appropriate selections it tells me: "No new form field annotations were detected." and then prompts me to the form editing page. I've also tried simply selecting "Add or Edit Fields" from the Forms menu and the same thing happens - it isn't detecting any form fields.
The only time the Form Wizard or Add or Edit Fields options work is if I use underlines instead of boxes as the form fields, but I'd really prefer to use the boxes since they lend themselves to the aesthetics of the document much better.
I'm new to converting Illustrator files into interactive .PDFs, so I'm not sure what I should be doing. The background color of the document is grey and the boxes are white with no outline (I tried it with an outline around the boxes and it still didn't work). Any advice would be much appreciated! Thanks.
Beth

Hi Beth
How big are these fields? Are they for entering text or just check boxes?
I have found that sometimes FormWizard is not compatible with some Quark files.
Sounds like it might be easier for you to do the fields manually.
First draw the field like you want it and set that as the default then you can choose to paste multiple fields.
Also if you want to use a line for FormWizard you can make the background of the field white and cover the line with it.
Ron

Cannot detect any drives in my macbook pro 13.

Hi,
I have a macbook pro 13" that was built December 2009 (so mid-2009 model).
About a month ago, out of nowhere (maybe after an update), my macbook started to freeze up/beachball.
I shutdown the machine, and then it wouldn't even boot up. Just saw the spiral and apple logo go into an infinite loop.
At first I thought it was the filesystem that was corrupted, but as I analyzed the issue it seemed like the drive refused to work. So I thought to myself it's a bad drive. I tried numerous things, until I ruled it was definitely the drive.
So I ordered an Intel X25-M 160GB SSD as a replacement.
In the meantime, I had a western digital passport 500GB drive (USB). So I installed OSX on it for the time being.
The drive arrived, and I swap it out. The drive isn't detected (doesn't show up in disk utility nor system profiler.) So I swap back in the original drive, it detects the drive.
At this point, I'm frustrated. What could be the problem?
So I decided to disassemble my passport drive, which happened to be a WD Scorpio Blue SATA2 500GB drive. I put that into the macbook pro 13". It's not detected.
So now I'm thinking it's the SATA controller issue only to find out these Macbook Pros are plauged with issues. I believe my Macbook Pro was shipped with EFI 1.7. So I downgrade to 1.6. I try all 3 drives, and only the original macbook drive is detected. Except it barely functions.
Now I connect all 3 drives to my PC. To my surprise all of them work fine. Even the original macbook drive. Infact the original macbook drive seems rather fit.
So at the moment, my macbook is useless without an external USB drive to boot from.
Is anyone experiencing similar issues? Drives not being detected at all?
Any suggestions or handy hints. I've exhausted all my resources and I'm frustrated. Note: I do not have applecare and the 3 month period has expired.
Thanks.

Naveen, go here:
https://selfsolve.apple.com/GetWarranty.do
Type in your Mac's serial number (which you can get off the box or from "About this Mac" in the Apple Menu, or even in System Profiler) and it should tell you how much warranty you have left and some options for contacting Apple (take it to an Apple Store is probably the best option if you can).
Hope this helps.

HT1386 Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates

10.5.8 won't detect any external hard drives

I want to update my 10.5.8 Macbook Pro which I bought in 2008. It runs incredibly slow, and I want to reformat it before updating with Snow Leopard. The problem is that my computer won't detect any external disc drives, so I can't back up my important files. Is there any way to fix this, or is there something I'm missing?
I'm also wondering if I'll be able to reformat without my original OSX install disc that came with my computer, and if so, how? Thanks in advance.

If you are going to be upgrading to OS X Snow Leopard, the installer for that should be able to format your drive for you before you do the installation. I'm assuming that you have those CD's for your computer as you need discs to be able to ugrade to Snow Leopard. What happens when you plug in an external drive? Does it just not recognize the drive, or do you just not have it selected to show the drive on your desktop? With Finder being the top window, click on the Finder Menu and select preferences > select general in the tabs at the top and then make sure that External discs is checked.

Windows did not detect any networking hardware, Windows 7, New Hard Drive

Message "Windows did not detect any networking hardware"
Satellite P505 S8980 Windows 7 Home Premium.
I replaced the Toshiba 500 GB HD with 500 GB Seagate.
Device Manager icon for any device with yellow exclamation mark,
Click on "Update Driver". Lan eNet details as follows:
Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Browse to the folder where the setup program has the driver...
Message: "The best driver software is already installed."
(But the yellow exclamation mark still harasses me.)
--- Go to "Setup new connection" ---
"Choose a connection option"
Click on "Connect to the Internet"
Response: "Windows did not detect networking hardware"
As near as I can tell, that translates from error 0x8E5E0247
I have this same error on other yellow exclamation marks respective of what kind of device it is.
=> To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
Note:
Same issue (hardware not detected) for Video adapter and Audio.
I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware. I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed. I have uninstalled and reinstalled with same results.
Solved!
Go to Solution.

I'm discovering I am not as well as I thought... running on the AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
Review for context: Advanced Function HDD
Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
Toshiba supplied Windows-7 System Restore Discs: to factory state
Then I built the Windows-7 Repair Disc... used later.
Hard drive was replaced when it caused SMART warning at every system boot.
Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
That new drive would not boot: "Required source not found"
Booted My newly created Windows-7 repair disc, and used to to fix startup.
See images.
That worked and then the ST9500423AS disc booted.
Now... next day I discovered Window Update is not working.
I get message:
Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
I ran Microsoft Fixit for updates. It says it fixed two items.
I still have the problem.
The service shows "started"
Control Panel/ ACTION Center/ Maintenance/ Check for Updates
"No action needed"
"Windows Update does not require any action"
I checked Update History...
... It is empty, else window is vacant... blank.
Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
It works! 7 updates to install, including SP1... but I did NOT install them.
Switch back to the AF drive... Update doesn't work. I am broke again.
Is this another strange problem caused by the Advance Format issue?
What to do?
By the way... I did install an Intel storage Matrix driver update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
Carl

M2N78-LA Motherboard BIOS did not detect any Hard Drive

Hi,
I have M2N78-LA Motherboard and the BIOS did not detect ANY hard drive
I tried
1- Replaced the HD with another one. did not work
2- Changed the jumper of HD. did not work
3- Changed the SATA data cable and power cable. did not work.
4- Reset the BIOS by removing the battery and also by positioning the cmos jumber. did not work.
I still all time get no hard drive detected, and some time jam on Detecting storage devices ....
then after hours get no booting device.
Any Idea will be good

M2N78-LA Motherboard BIOS did not detect any Hard Drive, does anyone have an answer to this problem.

TS1398 I can't find my wifi name or signal or any other wifi spots and I'm right next to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

I can't find my wifi name or signal or any other wifi spots and I'm right nepxt to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

If not:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iPod connect to/see other networks? (you were not clear)
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Time Capsual isn't geting any power (802.11n Wi-Fi hard Drive)

Suddenly my Time Capsual isn't geting any power (802.11n Wi-Fi hard Drive) ideas?

By no power do you mean the main LED is off?? What model is it.. please give the number from the rubber mat on the bottom A1xxx?
How old is it?
What does the wireless comment have to do with it?? Is the wireless the issue.. not the power to the TC?
Early TC or any that are between 2-3years old can have the power supply suddenly die.. it is a common issue.. the TC runs too hot and burns out the supply.
google for dead time capsule.

USB has power, but not detecting any USB drive. Also crazy trackpad.

I own a 2012 Macbook Pro, and I am running OS X Version 10.9.4 on it. Everything was working fine until last week, when the USB ports stopped working. Now, the USB ports still have power because the lights in my USB drive and external hard disk turn on when I insert them into the system. However, the OS X is not able to detect any of these devices as well as my USB mouse. I have Windows 7 installed on bootcamp, but there is no USB response in Windows 7 as well.
I have done the SMC and PRAM reset, as suggested on numerous other discussions, but there were no improvements.
To add to all this, the trackpad on my macbook started going berserk. The pointer has started to randomly click and drag, while I am not even touching the trackpad. It is extremely hard to move cursor to a particular folder, because the cursor will click and drag a lot of times, while it has reached its destination. Also, the trackpad acts insensitive in certain regions. I tried cleaning the trackpad (as suggested on other discussions), but the problem goes away only temporarily. It seems, after using it for a couple of hours, the problem is back again.
With USB and trackpad not responding, it is getting hard to pass the first week of school. I took it to IT department at my school, they checked it for a couple of minutes, and told me that I'll have to shell out $280 for sending it to Apple Depot. I'll really appreciate any kinda help!
Thanks for your time!

Hi @Ak7
Welcome to the HP Support Forums!
I understand that you are having trouble with your USB ports not recognizing most devices. I am happy to assist with this.
Since it just recently started to happen, I would normally recommend starting with a system restore to a point before the problem began. (say about a week ago or longer if possible) Unfortunately you have already done a reinstall, so there should not be any useful restore points to use.
Presumably you already backed up any data you could before reinstalling windows, and if so, then you could try a system recovery, which would restore the factory image of the notebook. Give it a try and let me know if it makes any difference.
Using Microsoft System Restore (Windows 7)
Performing an HP System Recovery (Windows 7)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

My computer won't detect any of my devices

Hello everyone,
I've been having this issue for a long time now. In april, I got a windows 8 computer. Everything works perfectly fine. It always detected my ipod classic (despite it being old), my ipad first generation and my iphone 4. After updating to ios7 my computer stopped detecting my phone. No matter what I did it wouldn't detect it. About a month ago I synced my ipod classic and it worked perfectly fine. Around two nights ago, I plugged in my ipod and my ipad and it wouldn't detect it. my ipad would say 'not charning' and the ipod would in fact be charging. I've seen plenty of forums how you need to delete itunes and the mobile support thing and reinstall but it isn't helping me much. I did that already but itunes still doesn't detect any of my devices. i ran a test that itunes has, the diagnostics one and despite my phone being connected, it says 'no iphone,ipod or ipad found.' my phone charges when plugged but it's really annoying to not be able to sync any of my devices. Does anybody have an alternative or something else I can do? Thanks.

What operating system are you running on your E330 and X230?
The answer may be found by figuring out why it works on the E330...
Have you tried to use any other devices in the USB ports besides those 2?
And were the recognized?
Did these devices ever work with your X230?
You could try to roll back to a previous driver update and see if that helps?
Here are some resources that might help you:
ThinkVantage Technologies Download
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432
Diagnostic Software
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS
Tool Box:
http://www.lenovoservicetraining.com/ion/Lenovo_System_Toolbox/pdf/Lenovo%20System%20Toolbox.pdf
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Setup could not detect any Sound Blaster Audigy card on your system

Hi from Barcelona!
I've a Soun Blaster Audigy card (Model: SB0090)
I tried to install the Audigy software and drivers from the original product CD but Setup was unable to find Augigy hardware and halted the installation!
"Setup could not detect any Sound Blaster card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program"
By the way. Manually the sound drivers can be installed working only front speakers of the 5. Creative system
I tried a clean installation of Windows XP and Windows 2000 PRO (reformatted the hard dri've) but Audigy install CD still could not find Audigy hardware.
I've changed the card to a different PCI slot with the same results!!! Damaged?
What is happening? I need a solution!! Many users have this problem to with other Sound Blaster cards and models...

ADSLNEW wrote:
It seems to be an important BUG of Creative Sound Blaster Audigy cards related with EEPROM!!!
Yes, indeed, that is my theory as well. After much ****hing and on-line research, it seems that this problem has been around since 2002. From Creative Labs point of view, it appears they view this as "pilot error" -- the user has installed the card in a system that is not fully compliant with the latest standards -- specifically Microsofts ACPI (configuration and power management). A wide variety of configurations and/or actions seem to cause the PCI subsystem ID in the Audigy EEPROM to be erroneously overwritten -- including certain older motherboards, certain older PCI cards, and perhaps other actions.
Once the subsystem ID in the EEPROM is overwritten and has garbage information, many or all of the Creative applications cease working and various sound problems can arise. Attempts to reinstall the driver or update to the latest driver consistently fail becuase of the dreaded "Setup could not detect any Sound Blaster Audigy card in your system..." error message.
There appear to be four fixes:
) Get a replacement Audigy card from Creative, but <EM>only</EM> after you perform their prescribed troubleshooting steps to prove that the card is indeed the source of the problem. Apparently, the steps include installing the card in another PC. Apparently, Creative in Europe is more willing to replace your card than Creative in the US. It's up to Creative Labs whether or not they issue you an RMA ("Return Material Authorization").
However, this fix will fail if the root causes of the EEPROM error are not corrected. Apparently, Creative Tech Support isn't always a foolproof source of guidance, so the burden is on you. The root cause MUST be corrected before the new card is installed, or the same problem will happen all over again. Eliminating the root cause may involve replacing your motherboard, replacing other PCI cards, or manual configuration (disabling ACPI).
2) Reprogramming the EEPROM. This is for advanced PC owners only, because it involves desoldering the EEPROM, programming it, and resoldering (and even lifting some pins to prevent reprogramming). There are instructions on how to do this posted in the German Creative Labs discussion board, by a Russian (!). I have links for those who are interested.
3) Removing the Creative drivers and software (using Clean Sweep procedures and third party utilities), updating again using Windows XP SP2, then physically moving the card to different PCI slots (multiple times if necessary), until ACPI Bios writes the proper information into the EEPROM. You can then reload the drivers.
Again, the root causes of the problem must be removed or your fix will only be temporary (a day or two). This solution also seems to be very dependent on the specifics of your system (motherboard, PCI cards, etc.).
4) Some people have had success in by-passing the step in the driver installation process where they check for the Audigy card subsystem ID, using a utility called CTZAPxx on the installation CD. Then then manually install each of the applications they need to use.
5) Use the open source driver from the kX Project (http://kxproject.lugosoft.com/index.php). This driver (and associated utilities) does not depend on the detailed configuration of the card (i.e. they don't check subsystem ID) and appear to work fine even with cards with corrupted EEPROM.
This driver is aimed primarily at computer music applications, and opens up the on-card signal processing capabilities. The downside is that the Audigy 2 ZS does not have all of it's capabilities supported <EM>yet </EM>(e.g. Dolby Digital decoding, S/PIF passthrough, possibly some game sound features, THX, 24-bit recording, support for Hyperthreading CPUs, etc.). But scanning over the discussion boards, the user community seems to be MUCH happier with the performance and support associated with these drivers than with Creative's.
This is the direction I'm going. I'm not a big gamer and I don't really care about the latest in home theater audio performance. Basic 5. surround sound is all I care about, and I'm much more interested in computer music capabilities.
I have also lost faith in Creative Labs as a vendor to provide the support I want and need going forward. Just imagine if the Creative Labs were running the Space Shuttle program :smileysurprised:.

My CD Drive (:E) Isn't Detecting Any CDs...

Similar Messages

Maybe you are looking for