My CD drive isn't working anymore

Hi to all.
I've had my Macbook pro for about...4 or 5 years now.
I'm trying to copy some music from CD's i recently bought but for some reason my CD-Rom drive just keeps spitting CD's out. I put the CD in, and it spits it right back out without it even trying to spin the CD... Then I put it back in and it spins for literally a second, stops, and spits the CD back out.
I finally took out the CD waited a few seconds and put it in again and it finally took the CD. I thought it may have just been that CD so i shrugged it off, but when I put in the next CD, the exact same thing happened.
Has this happened to anyone else before? and does any one know what might be wrong and if their is a solution to this, how would I go about fixing this issue.
I'm having to copy the songs onto my PS3, then put them onto an external HDD then transfer them over through the external HDD. As you may have guessed.... it's EXTREMELY annoying.

http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
===============
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type cd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
Make sure the CDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
*Your drive may need cleaning.* Cleaning kits can be purchased from any store that sells CD/DVDs.
!http://i50.tinypic.com/izvwo1.gif!

Similar Messages

  • I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top.  The fading on and off light isn't working anymore either.  Does anyone know anything about this?

    I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right.  The fading on and off light on area surrounding the screen isn't working anymore either.  Has anyone else had similar problems?  Any solutions?  Thanks!

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • DVD drive isn't working. Can't install Snow Leopard.

    My DVD drive isn't working properly. Is there another way for me to install Snow Leopard? I didn't see a digital download of this software in the Apple Store.

    Another computer or an ext CD/DVD player are your only options.

  • My cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

    my cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

    I think not.   You will need to order a disc from Apple quoting your serial number, as many of these discs are machine specific.   So unless you can get your drive working I think you will have to take a trip to an Apple store.  
    Indeed, you have an old computer that may not be worth the cost of repair ... but it is still worth seeking Apple advice and a visual inspection.   It just might be something not too drastic.

  • I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive.  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive).  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    Buy or borrow an external USB optical drive.
    See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

  • My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    Hi Mr.Acevedo329!
    I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
    iPod troubleshooting basics and service FAQ
    http://support.apple.com/kb/ts1382
    Specifically, you will want to take note of this section:
    The headphones don't work
    If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Hi there, Wondering if you might know?  I don't have enough space to update the new software on iPad.  So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so.  Will I lose the progress data/

    Hi there,
    Wondering if you might know?  I don't have enough space to update the new software on iPad.  So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so.  Will I lose the progress data/levels in the games? But how do I back up the games data?
    Please help.  Scared to delete them to update and then not have the space to restore them and if I get them again will the levels/progress be gone?
    Thanks Rachel

    Connect your device to iTunes and do the update through iTunes. Using a computer takes much less space on your device than doing the update on your device.

  • My optical drive isn´t working, how can I fix it?

    My optical drive isn´t working, how can I fix it?
    iMac 21.5" Mid 2010

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • I got creative suite 6 design standard and bridge isn´t working anymore.

    i got creative suite 6 design standard and bridge isn´t working anymore.
    it says I should delete the cache in order to get started but it always breaks down while doing it.
    I tried to reinstall but also this didn´t work.
    what can I do?

    Without proper system information nobody can tell you anything specific. You can always delete the Bridge cache at the operating system level - it is, after all, merely a file/ folder.
    Mylenium

  • My DVD drive isn't working and I want to download elements pc 6 with my serial number, how can I do that?

    I have the disc for Ps elements 6 for windows, but my DVD drive isn't working. How can I download with my serial number?

    I'm afraid there is no place to download photoshop elements 6, that i know of anyway.
    (unless you had bought it from adobe as an download, then you could possibly log in to your account and download pse 6)
    What operating system are you using?
    Do you have another computer with a working dvd drive or do you have a flash drive, camera card.
    USB dvd drives are dirt cheap, so if you live near a computer store, that might be an option or if you have a friend that has one you can borrow.

  • My internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well

    my internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well and took about 4 hours to finally be able to shut down and close everything. Does anyone know how to fix this? Im going into exams and need my internet to work
    Thanks

    I dont know if your allowed to show images here but if you are then these pictures will show you what happens.
    This is what happens when I turn on my iMac (normal)
    This is what happens a few seconds after I turn on my iMac
    Here it is up close
    Hopefully these pictures will help you understand what's been hapening on my iMac when I turn it on.
    Thanks

  • I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

    I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

    Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You can buy Snow Leopard at:
    Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    You could contact Apple Support and see if they have the original discs for that machine but it would be 10.4.11 and there's no reason not to go to at least Snow Leopard, especially since the 10.6 discs would probably cost the same as a replacement set of 10.4.11

  • I just updated my mac book air with the OSX and now my ethernet adapter isn't working anymore

    I just updated my mac book air with the OSX and now my ethernet adapter isn't working anymore
    Help!

    Hi daisy_riggs,
    To restore the Back button to your Safari Toolbar, you can go to the View menu and select Customize Toolbar. Drag the Back/Forward button to the actual toolbar. See this article -
    Safari 6 (OS X Mountain Lion): Customize the Safari window
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • X isn't working anymore since the last system update.

    Hi there,
    I'm using Arch for a couple of months and didn't need a forums login until now. But currently I've broken somehow my system and can't get it working anymore. So I need some help of you.
    The Problem:
    Arch Linux is running on my computer at work as a virtual machine inside VMWare Player 6.0.2-1744117. Host ist Win 8.1. After the system-update xorg didn't start anymore. Neither with kdm nor with plain X. When I start the X-Server (X as user or systemctl start kdm), the cursor of the tty console appears in the upper left corner, but isn't blinking. That's all. Only a black screen. It seems, X itself isn't starting. There's no process in ps and no graphics mode switch. In journalctl there's no (error) message.
    What I've done:
    Last week I made a system update, xorg-server was a part of it:
    yaourt -Qi xorg-server
    Name : xorg-server
    Version : 1.15.1-1
    Description : Xorg X server
    Installed on : Do 12 Jun 2014 11:16:46 CEST
    I've also updated xf86-video-vmware. xf86-video-vesa was last updated on 23th of January.
    What happens (xf86-video-vesa)
    /var/log/Xorg.log looks normal:
    [ 43.168] (II) VESA(0): initializing int10
    [ 43.168] (II) VESA(0): Primary V_BIOS segment is: 0xc000
    [ 43.169] (II) VESA(0): VESA BIOS detected
    [ 43.169] (II) VESA(0): VESA VBE Version 2.0
    [ 43.169] (II) VESA(0): VESA VBE Total Mem: 32768 kB
    [ 43.169] (II) VESA(0): VESA VBE OEM: V M ware, Inc. VBE support 2.0
    [ 43.169] (II) VESA(0): VESA VBE OEM Software Rev: 2.0
    [ 43.169] (II) VESA(0): VESA VBE OEM Vendor: VMware, Inc
    [ 43.169] (II) VESA(0): VESA VBE OEM Product: VMware virtual machine
    [ 43.169] (II) VESA(0): VESA VBE OEM Product Rev: 2.0
    [ 43.169] (II) VESA(0): virtual address = 0x7fa613360000,
    physical address = 0xe8000000, size = 33554432
    [ 43.173] (II) VESA(0): Setting up VESA Mode 0x148 (1856x1392)
    [ 43.179] (==) VESA(0): Default visual is TrueColor
    [ 43.184] (==) VESA(0): Backing store enabled
    [ 43.185] (==) VESA(0): DPMS enabled
    [ 43.185] (WW) VESA(0): Option "RenderAccel" is not used
    [ 43.185] (==) RandR enabled
    [ 43.889] (II) AIGLX: Loaded and initialized swrast
    What happens (xf86-video-vmware)
    Starting X gives me:
    VMware: No 3D enabled (0, Success).
    (EE)
    (EE) Backtrace:
    (EE) 0: X (xorg_backtrace+0x48) [0x584b08]
    (EE) 1: X (0x400000+0x1887f9) [0x5887f9]
    (EE) 2: /usr/lib/libpthread.so.0 (0x7f6befdc8000+0xf4b0) [0x7f6befdd74b0]
    (EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0x14848) [0x7f6beb662848]
    (EE) 4: X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
    (EE) 5: X (xf86SetDesiredModes+0x106) [0x4aae76]
    (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0xe8c0) [0x7f6beb65c8c0]
    (EE) 7: X (0x400000+0xa7b9e) [0x4a7b9e]
    (EE) 8: X (0x400000+0x39966) [0x439966]
    (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f6beea35000]
    (EE) 10: X (0x400000+0x2507e) [0x42507e]
    (EE)
    (EE) Segmentation fault at address 0x8
    (EE)
    Fatal server error:
    (EE) Caught signal 11 (Segmentation fault). Server aborting
    (EE)
    (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    (EE)
    Segmentation fault
    I've tried a downgrade to xorg-server 1.5.0.5, but it didn't help.
    I would prefer the vmware graphics driver, but temporary the vesa driver would do the job too. I can access the system via ssh from outside. Inside the VMWare after starting X I can't switch to the tty consoles anymore.
    Any ideas?
    Thanks so far.

    I upgraded everything today including open-vm-tools-dkms and it still does not work.
    MickeyKnox has the same problem: https://bbs.archlinux.org/viewtopic.php?id=182971
    This is his codebin, same errors I have: http://codebin.org/view/53bcafc9
    Could this be related to this report: https://bugs.archlinux.org/task/40781?
    How could I install the version from the git?
    [EDIT] I also tried downgrading mesa and mesa-libgl to Version 10.1.4-1 to no avail. (see bug report FS#40781 above)
    [EDIT2] At least I can now use [ALT]+[F2] to log into the system without arch-chrooting from a live medium. So it hangs "less bad" ...
    I also get the following error (as does MickeyKnox):
    [ 42.709] (EE) Failed to convert pixmap to scanout.
    [ 42.709] (EE)
    [ 42.709] (EE) Backtrace:
    [ 42.726] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
    [ 42.726] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
    [ 42.727] (EE) 2: /usr/lib/libpthread.so.0 (0x7f324d915000+0xf4b0) [0x7f324d9244b0]
    [ 42.727] (EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0x14848) [0x7f32487af848]
    [ 42.727] (EE) 4: /usr/bin/X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
    [ 42.727] (EE) 5: /usr/bin/X (xf86SetDesiredModes+0x106) [0x4aae76]
    [ 42.727] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0xe8c0) [0x7f32487a98c0]
    [ 42.727] (EE) 7: /usr/bin/X (0x400000+0xa7b9e) [0x4a7b9e]
    [ 42.727] (EE) 8: /usr/bin/X (0x400000+0x39966) [0x439966]
    [ 42.727] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f324c582000]
    [ 42.727] (EE) 10: /usr/bin/X (0x400000+0x2507e) [0x42507e]
    [ 42.727] (EE)
    [ 42.727] (EE) Segmentation fault at address 0x8
    [ 42.727] (EE)
    Fatal server error:
    [ 42.727] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 42.727] (EE)
    [ 42.727] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 42.727] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 42.727] (EE)
    Last edited by garunkel (2014-06-17 17:37:07)

  • HT1338 i updated my mac software to os x 10.8.4, but my dvd drive isn`t working

    i updated my mac software to os x 10.8.4, but my dvd drive isn`t working

    Information.
    CD/DVD Drive - Troubleshooting
    CD/DVD Drive - Troubleshooting (2)

Maybe you are looking for