My cd driver doesn't work to install new hp printer

I bought a new HP Printer ENVY 4500 I can't  use it from my Mac 0S as the CD/DVD driver doesn't work
.How do I  conect it?

Hi,
Regardless the CD issue, I affraid that the printer is incompatible with Leopard (OS X 10.5) but require OS X 10.6 or a later version.
You may find its System Requirement listed below:
http://support.hp.com/us-en/product/HP-ENVY-4500-e-All-in-One-Printer-series/5304875/model/5304876/d...
I would suggest upgrading your operating system or contacting the retail and replace it with another model which is compatible with your operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • External Combo Drive doesn't work after installing Snow Leopard

    This Mini was bought used with a defective combo drive. I purchased a "No-Brand" external Combo Drive (USB connected and powered) off eBay. Everything worked fine under Leopard. I used the external drive to install Snow leopard but could not eject the DVD at the completion of the installation process. I manually ejected the DVD and discovered the external drive now doesn't work with either DVD's or CD"s.
    Any ideas what the problem is?
    Ken

    Mark this up to "cockpit' trouble on my part. The external combo drive now works.

  • Optical drive doesn't work after installing itunes 11.0.5.5

    After updating to iTunes 11.0.5.5 my optical drive does not work. I have put the same CD in another PC and it works fine. When I right click on the optical disc drive in 'Computer' I get the error message "Windows cannot access the specified device, or file. You may not have the appropriate permission to access the item." If a CD is in the drive, the drive will either keep popping open or not open at all on its own. The CD will not open in any other player such as Windows Media Player either.

    I read this article:
    http://www.gearsoftware.com/wiki/index.php/CD/DVD_drives_disappear_after_install ing_iTunes
    I did not have any AFS drivers.
    This is what I did and my optical drive is now working:
    1. Backed up iTunes
    2. Unistalled iTunes
    3. Tried to install iTunes 10.7 for Windows 64
    http://support.apple.com/downloads/#itunes
    4. When iTunes tried to launch I received the message "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"
    5. My computer would not recongize the optical drive at all now
    6. I re-installed iTunes 11.0.5 for Windows 64
    http://support.apple.com/downloads/#itunes
    7. All my iTunes data is there and my optical drive works now
    Note: I should clarify that before uninstalling iTunes 11.0.5 my optical drive worked sometimes. It would play maybe one song, both in iTunes and Windows Media Player and then stop working. The drive would also pop open on its own whether there was a disc in there or not. Also sometimes I had to manually open the drive with a paper clip.

  • Cd drive doesn't work after installing iTunes

    I installed iTunes and started to try and rip cd's into the library but the cd drive isn't working any more..  Something about the driver, which I updated, or it also says the registry is incomplete for the cd drive.  I ran into this once before on another computer, but I forget how to fix this.  I tried to do a system restore to before I installed iTunes, but my computer wouldn't let me restore.  Any suggestions?

    Hello banjo1971,
    The following article provides steps which can help correct this issue and get your disc drive working with iTunes again.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    Cheers,
    Allen

  • I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion

    I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
    So here's what I done so far:
    tried resetting PRAM - No success
    Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
    Tried re installing mountain lion via download . It froze halfway installing -no success.
    Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
    Tried booting from safe mode - no success
    Tried the command line boot - no success.
    Please someone help!

    Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
    Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
    Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
    I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running.

  • HT4718 optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro

    Hi there,
    my questions are:
    1.optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro.
    how to do it on internet?
    2.already tried connected via lan cable, but folder with question mark appeared.What could be problem(DHCP was enabled)
    3.Is it possible to do it in target disk mode through my even older powerbook G4
    4. Is it possible to do it with flash memory , and how to download the stuff on?
    thanks in advance
    Allterro

    If your Macbook Pro (MBP) came preinstalled with OS X Lion (10.7), you can use Internet Recovery to reinstall it.
    You will need an Internet connection.
    Restart your Mac using Command+Option+R until you see a spinning globe. This will boot into Apple's server and load their Recovery HD.
    From the OS X Utilities menu, select Reinstall OS X. You should see a Lion logo to the left of this option.
    If your MBP came preinstalled with OS X Snow Leopard you will need the DVD and an external CD/DVD drive to use to install it.
    You may also be able to put your MBP into Target Mode with another Mac running a version of OS X that is compatible with your MBP. From that other Mac download OS X from the App Store and point to your MBP (Target Mode) to install to. I've never tried this but it sounds like it might work.

  • Brand new Mac Pro.. CD DRIVE DOESN'T WORK!

    I just set up my new Mac Pro yesterday, and the cd/dvd drive doesn't work. It worked once, when I was installing a printer, but it made a really bad noise, and now whenever I put any cd or dvd in, it doesn't even recognize it or react.
    I don't know what to do.
    I know I have a warranty so somebody from apple should be able to help me, but I can't even reach anybody on the customer support phone number.
    Does anybody know a way to fix this?

    Try depressing the SMC RESET button for 10 seconds, small round button under drive #4 in the rear (with unit unplugged).

  • CD Drive Doesn't Work, Please Help

    Recently my Macbook was running really slowly so I restored my Macbook to factory settings. Now my CD Drive doesn't work. I can't burn CD's from iTunes or use cd's for anything. Please help!

    HI Yash,
    After re-installing the OS; did you check for software updates? If they're are any you may want to install them and see if it fixes your issue. I know some times things stop working after an OS install if the software updates are not installed.
    Can you still boot to the install disk? (by using option boot)
    If you can't option boot to the install disk, you might want to try a SMC reset. http://support.apple.com/kb/ht3964
    if you still can't you may want to try a NVRAM reset.
    http://support.apple.com/kb/ht1379
    If that doesn't help you could try the apple troubleshooting super drive article;
    http://support.apple.com/kb/ht2801
    if you can option boot to the install disk; but can't see disks when your booted to the built in hard drive, you might want to try a safeboot. http://support.apple.com/kb/ht1455

  • What can I do if my CD or DVD drive doesn't work properly in Windows 8?

    QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
    AnswerNote: For help with this issue in Windows 7, please see this article.
    To get your CD or DVD drive working correctly, try these suggestions in the order listed.
    Reinstall the Driver
    Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
    Power Cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
    Hold down the power button for thirty seconds.
    Reattach the battery if removed.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Start the computer and test the drive
    Microsoft Fix-it
    Your computer may exhibit one or more of the following symptoms:
    Your CD or DVD drive no longer appears in Windows
    Your CD or DVD drive does not read or write and is shown as disabled
    The media in your CD or DVD drive cannot be read
    The media cannot be written to a CD or DVD inserted into the drive
    You receive an error message about your CD or DVD drive
    If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
    System Restore
    Try using System Restore to restore to the most restore point from before the problem arose.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    System Recovery
    If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
    For more information on performing a recovery, see the following article:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    Contact Customer Support
    If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

    See this Microsoft article - http://support.microsoft.com/kb/314060/en-us  For ways to fix manually
    and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
    (these are from the Microsoft article)
    Resolution 2: Use the CD/DVD Fix it troubleshooter
    To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8   
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    Windows 7, Windows Vista and Windows XP
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    If your problem is not solved, try the next
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

    My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

    Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

  • Kernal freaks out and cd drive doesn't work.

    I had trouble booting up my imac and it says something about the kernal not working during the boot up stage. I took out one of the sticks of ram and it will boot up fine. Does that mean that my ram is bad.
    Also my cd drive doesn't work. I just put in a cd and it spits it out. I tried all sorts of cd's and it has the same results.
    Please let me know what I can do.

    If it works with different ram, then that means the ram that's in there when it won't boot is likely faulty. The kernal panics are likely due to the bad ram. Return and/or exchange it and double check to make sure you got the right type of ram. You want PC2-5300 (667MHz) http://docs.info.apple.com/article.html?artnum=303721
    Secondly the drive issue sound like a failure of it to work al together. If you're under warranty I'd call Apple to arrange a repair, or take it into an Apple Store or Authorised Service Provider.
    Nick

  • My iPhoto doesn't work after installing lion?

    My Iphoto doesn't work after installing lion.
    it suggest that I have to instal iphoto again.
    where can I find this

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • I have a imac g4 with a philips cdd5301  drive. the drive doesn't work what should i replace it with

    i have a imac g4 with a philips cdd5301 drive. the drive doesn't work. what should i replace it with that is compatible. i've seen some bad reviews about the philips drive

    Any good external optical drive should do, in this case, Google is your friend, just make sure it's Mac compatible.

  • MBP late 2011 disc driver doesn't work

    Before I updated the OS to 10.9.1, my disc driver worked well and I usedbootcamp to set up WIN 7 for several times. But afterwards, when I tried to reset the bootcamp win7, I did like I always did, delete the former os harddrive part, then I started to reset the win7, I found that the disc driver doesn't work.
    When I insert a disc, it would be push out whatever disc I insert, os disc, cd, dvd. It just doesn't work.
    I don't know if it is broken or just beacuse of the new 10.9.1
    I need some help.
    Thanks for you all who are willing to see this.

    It sounds like the lens on your optical drive is dirty. Use a cleaning DVD or wrap a microfiber cloth around a credit card and carefully slide it in and out a few times.

  • Hard drive on my mac died, installed new hard drive.  When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

    hard drive on my mac died, installed new hard drive.  When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

    Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
    Here is a link explaining how to get your previously purchased content back:
    http://support.apple.com/kb/HT2519
    You also want to authorize your Apple ID account on the computer by following these instructions as well:
    http://support.apple.com/kb/PH1730
    Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
    Hopefully I was of some help:)

Maybe you are looking for