My cd/dvd drive is inop on my 13inch macbook pro and will not show a disc or eject it

cd/dvd drive will not work and will not display any disc in the drive. I have been unsucsessful in trouble this and the blank cd-r currently in the drive won't even eject manually even with a restart.

This fixed my issue, which sounds just like yours:
http://www.powermax.com/askjacob/2012/02/optical-drive-in-imac-not-accepting-cdd vd/
Basically:
1) Shut down
2) Wait until iMac has completely powered off
3) Hold down mouse button
4) Power on iMac and continue to hold down mouse button
5) Listen for sound of drive cycling itself (makes the sound of ejecting a disk)
6) Let mouse button go
7) Log in as normal
Good luck!
- Tom -

Similar Messages

  • HT201250 I run time machine on my iMac using an external hard drive.  I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

    I run time machine on my iMac using an external hard drive.  I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

    How do I set up Time Machine to a shared drive on another Mac?

  • I just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

    i just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

    TVs don't support "Mac OS Extended (Journaled)", so you will probably have to use FAT32. To format the external drive, follow the same steps as you did to format it with "Mac OS Extended (Journaled), but in the erasing screen, select "MS-DOS (FAT)" as "Format". Note that FAT32 isn't compatible with files bigger than 4 GB. Also, you may have to format the external drive in a PC

  • DVD Drive on 4-5 yr old Macbook Pro

    MY DVD drive is ejecting my discs. Is this a way of telling me to clean the lens, or is there some way to fix this drive?
    It has the power to eject so it is working. Is there a way to get the drive up and running without removing it, or replacing it?

    You could always try one of those 'lens cleaning' kits.... if no joy with that you'll need to take your machine to your local Apple Store or an AASP and have them check out the drive. If it needs to be replaced, you can either have Apple do it or (less expensively) DIY.
    Clinton

  • My macbook pro 13 will not play DVD's

    Until recently my disc drive on my macbook pro 13 was functioning properly. Then one day I had to watch a video for an online class, and thinking it was a just a bad disc, ignored the fact that there was no video to go with the audio playing with the DVD. The screen was just black, and when I minimized it, the video window was just black. About a week later, I wanted to watch a movie, and it was the same situation. Is there a setting somewhere in the DVD player application that might have turned my picture dark? If not, has anyone had this problem before? And what did you do to fix it?

    Until recently my disc drive on my macbook pro 13 was functioning properly. Then one day I had to watch a video for an online class, and thinking it was a just a bad disc, ignored the fact that there was no video to go with the audio playing with the DVD. The screen was just black, and when I minimized it, the video window was just black. About a week later, I wanted to watch a movie, and it was the same situation. Is there a setting somewhere in the DVD player application that might have turned my picture dark? If not, has anyone had this problem before? And what did you do to fix it?

  • HPE 180T does not recognize disc BD-RE BH20L, will not play a movie and will not burn a disc. DVD

    My blu-ray will not recognize dvd-r, will not play any dvd or burn a disc.  I ran all the diagnostic test and it says disc scratched, dirty or hardware problem, (Hardware Problem).
    8/10/2009 firmware B57A
    product#MXY00204HR, Driver Serial#B91D5P4022227.  I have a dvd drive works fine.
    I need to burn disc and realized I can only do it through optic drive.  Being windows 7, I cant just burn the info. on my vista.
    I have an old XP{ and it would be a shame to say I spent all this money on this machine and I cannot even burn a Disc!

    Hi
    To give you some precise answer it will be interesting to know which DVDs are not readable. Meaning of word 'some media' is to general and not helpful to understand the problem.
    Satellite A30 is pretty old notebook model and it is possible that ODD functionality is not good anymore. You can try to clean the lens.

  • My dvd drive won't work on my MacBook Pro.

    I've looked through tons of forums on this subject but have only found people that have the same problem as me but no solutions. I slide in a store bought DVD movie it spins and whirs for a few seconds and then gets spit back out. No sign of it even reading the DVD at all. Please help.

    Probably you have already read this article. If so ignore this reply.
    http://support.apple.com/kb/HT2801

  • Ipad Driver will not install on PC. Not recognized and will not show up in iTunes

    I traded for a 1st gen iPad and when I plug it into my computer (windows 7 home premium) the driver did not install and now the ipad is not recognizable. Can you help?

    What version of iTunes are you using?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • Hard drive will not show on desktop?

    Please can someone help? when i connect my iomega ego  HDD to my macbook pro it does not show on the desktop and i can not access it? i have gone to FINDER and the preferences say it will show.  I have gone to the SYSTEM PROFILER and it shows as connected in the USB as a High speed Bus - Iomega ego HDD (so i know its working) also i have gone to DISK UTILITY and it registers as 500 GB external raid.
    Does anyone know how i can access my hard drive?

    lloydie9143,
    I would suggest if there is no important data (or data that cannot be moved to another device) to erase the external and reformat the drive.
    System Profiler can see it which is a good sign and is recognizing the HDD, but reformatting it can often correct many of these issues with drives mounting and showing up for use.
    I hope this helps
    GL!

  • I put a flash drive into a friend's MacBook Pro and an icon doesn't appear.

    I hooked up both an external hard drive and a flash drive into my friend's new MacBook Pro and no icons appear.  Why is this?

    Have you checked Finder Preferences to see if the box for 'External Disks' has been checked?
    Ciao.

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

  • I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

    I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

    PIONEER DVD-RW  DVR-105:
      Firmware Revision:          A506
      Interconnect:          ATAPI
      Burn Support:          Yes (Apple Shipping Drive)
      Cache:          2000 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -RW
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:          Insert media and refresh to show available burn speeds
    yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

  • Cd/dvd drive will not receive a disc, can anyone please help?

    cd/dvd drive will not receive a disc, can anyone please help?

     
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • External dvd drive won't work on USB macBook air

    External dvd drive won't work on my macBook air usb port.  It works on older versions of air and iMac.
    Any ideas.  Tried the left shift, control, option and power button sumultaniously, but did not work.

    I know that no one has replied yet, but figured out the issue.  I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store.  They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive.  When I got home, I thought I would try one more thing.  I hooked it up to a powered hub and it works perfectly.  I'm not sure why no one else thought of it, but glad that I did.

  • Bought New Macbook Pro and Lightroom 5 in store -Need to install but don't have a CD/DVD drive

    Just got home from purchasing a new Macbook Pro and Lightroom 5.  Problem is I do not have a CD/DVD drive.  Just opened my Lightroom 5 to install and I'm clueless how to install it on my new laptop UGH! What can I do?  Is it possible to install my new Lightroom 5 without a CD/DVD drive? 

    install lr 5.5,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • Excel file from FTP Server UNIX

    Hi All, I am trying to fetch data from file server which is in EXCEL(.XLS) format. Able to connect FTP using FTP_CONNECT,using FTP_COMMAND(get filename). Now the problem is i am able to read text file but not EXCEL file. How to capture the excel file

  • How to populate data into SHP_BAPI_OBDLV_REPLICA_CALL In ECC

    Hi, i am transfering custom fieldsand standard fields  from ECC  to EWM when VMI STO outbound order is created in ECC using QRFC. my requirement is to fill the partner details and refernce document details, item details in SHP_BAPI_OBDLV_REPLICA_CALL

  • Connecting iPhone duplicates photos in iPhoto

    Every time I connect my iPhone 6 (running iOS 8.1.1) to my iMac (running 10.10.1 Yosemite) to sync my photos, iPhoto launches, every photo is duplicated, and pairs of identical photos are imported into my iPhoto library.  Is there any way to prevent

  • IWeb still won't publish

    Too bad they tied iPhoto to iWeb, because it just isn't working. It used to be so simple and easy to publish. Now I can't get iweb to work no matter what. I have deleted all the files (iweb)on my dot mac (read that helped someone else around here) I

  • How to validate the selection screen

    Hi, I am developing a program. In selection screen I face one problem. For three scenario three blocks I prepared. and another block for three radio button for three scenario. My objectives is if we select one readio button for one scenario, another