My cd/dvd drive will not accept discs
Last night I was burning some music to a disc from itunes... the first disc worked fine, then on the second I received an error message and now ever since the drive will not accept a disc (I can pop it in and it makes some noise and then kicks it out) and ideas
hftvhftv, greetings; Not at all. One can utilize a lens cleaning DVD, shoot some compressed air in the slot or wrap a fine microfiber cloth (eye glass cleaning cloth) around a stiff piece of paper or thin plastic and insert it gently inside the slot. All of these techniques have had success in the past.
Ciao.
Similar Messages
-
My CD/DVD drive will not accept a disk anymore. Any ideas?
My CD/DVD drive will not accept disks anymore. Any ideas to make this work short of a very expensive replacement?
Read the os Help menu.
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive -
My DVD Drive will not accept DVD's into the drive???
I catn even put a disk into the DVD drive... it wont accept it... this all happened after i updated to mountain lion..
any suggestions?? i dont think its a bad DVD drive cuase it was working before the update.
help????Article from Apple. http://support.apple.com/kb/HT2801
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best -
My CD/DVD drive will not eject disc
I have just recently purchased a new Macbook and I had the system for less then a few hours and there was already a problem with the system. The only thing that I have done to it is run the system updates and install the new Leopard OS. Upon completing the installation the disc would not eject from the drive. I have tried all the ways possible to eject it, but every time it makes three clicking noises as if it is trying to eject then the disc just reloads. I have even gone so far as to bring it in for service where they just shipped it to Apple to fix it. They claimed that the bottom of the case was bent and that Apple replaced it therefore fixing the problem. To my dismay when I brought the system back home the problem was still there. Apple wants me to ship it back to them, but I was hoping that there is some unseen solution to my problem, because I'm getting really feed up with this because I have owned this product for almost 3 weeks now and still have not been able to use it. So any help out there would be greatly appreciated.
Read the os Help menu.
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive -
I know there are other threads about this, but it seems like my situation is a little different than others. My combo drive has worked fine since I bought my laptop. Now, of course, it stops working one month after my warranty expires. It just won't take my disc and there's no disc in the drive. I've tried all of the following:
1) Resetting
2) Resetting PRAM
3) Resetting PMU
4) Resetting Open Firmware
None of these options worked. Is there anything else I can try, or do I have to shell out the money for Apple to fix it?I am having the same problem. If you hear get some advice that fixes the trick, I'd be grateful to hear from you. Thanks and good luck!
-
Combo Drive Problem: Not Accepting Discs
Recently, I swapped out a broken Matshita drive.
The new slot-loading optical drive will not accept discs.
What confounds me is that the drive (seems to) show up in the System Profiler:
MATSHITA CD-RW CW-8124:
Firmware Revision: DZ13
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: No
If it is a power connection issue, would the device appear in the System Profiler?
Anyone have a theory?
iBook G4 Mac OS X (10.4.8)John,
I agree with JeremyP, it sounds like your combo drive has serious problems & needs to be replaced. My guess is misaligned laser. If you live near an Apple Store, take it there to have one of the geniuses look at it. I had to have mine replaced when it rejected more DVDs than it accepted. It's refusal to accept CDs was probably not far off.
Peggy -
Cd/dvd drive will not receive a disc, can anyone please help?
cd/dvd drive will not receive a disc, can anyone please help?
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive -
HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there. It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies. I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive. Computer is out of warranty.
Hello crollinsphoto1, welcome to the HP Forums.
It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
I'd recommend starting with this document:
Resolving DVD and Blu-ray Movie Problems (Windows 7).
Also, are these purchased DVD's or burnt DVD's?
Do the movies play in other sources? (DVD player, other PC)
Let me know how this goes.
Thanks.
I worked on behalf of HP. -
CD/DVD Drive will Not read CD/DVDs
This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!
Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.
-
CD/DVD Drive Will Not Open
CD/DVD Drive Will Not Open
Thank you. I did find the problem - i'm running Windows 7 through Parallels and i need to Diconnect th CD drive within Windows to let the keyboard eject button work properly.
-
Satellite A40-151 DVD drive will not play DVDs
hi my dvd drive will play music cd's but when i try to play a dvd it just makes a beep and nothing happens i tried windvd and it comes on but everything is blurred and still wont play a dvd
Hello John
Please dont be mad on me but in your posting there is no question or something just small report that DVD drive will not play DVDs.
Anyway, if I am remembering well your unit is about 2 years old and has probably DVD-CDRW (Combo) drive. In my opinion there is no much to do. If the drive has problem with original DVDs I presume that there is laser calibrations problem and the device must be replaced.
I dont know how old is your unit exactly but please check if the warranty is still valid. If yes contact service partner in your country immediately. The drive should be replaced for free. If not you must replaced it on your own. If the drive replacement costs too much I recommend you to use external device (I do it with my old Satellite). On this way I can use newest and very fast super multi DL devices and also create own DVDs.
You can also try to find already used DVD/CD-RW drive and replace it alone. If you need assistance by replacement please write again.
Once again, dont be mad on me. I am ready to write my opinion but it is really annoying when someone write just one sentence and nothing more.
Good luck! -
My CD/DVD drive will not open
My CD/DVD drive will not open when I insert any type CD/DVD. The CD/DVD just runs but will not open.
Try cleaning the lens:
Use a DVD lens cleaning disk.
Use a few shots of compressed air in the slot.
Wrap a fine microfiber cloth (eyeglasses cleaning cloth?) around a business card and gently insert it in the slot.
If no success, a trip to the genius bar at an Apple store is the best option.
Ciao. -
The DVD Drive will not open with the keyboard eject button. The only way to open it is restart it and then put in appleoption+OF then type "eject cd" then type "Mac-boot" but there must be a simpler way to do this with out rebooting it every time you want to open the drive bay. The key board is brand new. I am using a IOgear Miniview III KVM switch. It works when you plug the keyboard in directly into the mac it works fine. Is there a KVM switch driver that is compatible with the Powermac G5 and a PC.
Open the Terminal application in the /Applications/Utilities/ folder and enter "drutil eject" without the quote marks. If you need to use this command often, it can be made into a double-clickable application. To do this, open the Script Editor in the /Applications/AppleScript/ folder, paste the following in:
do shell script "drutil eject"
and save it as an application.
(11147) -
I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected. How do I fix this?
try resetting the System Management Controller (SMC).
-
I have just now set up my new HP Pavilion p7-1110 - the DVD drive will not open.
Hello Melly,
I would like to assist you with some information I have found about this issue and give you the in's and out's of your issue. The link below will give you different ways to get your dvd drive open:
http://www.computerhope.com/issues/ch000214.htm
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>Please click Kudos, if this information has been helpful >>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Maybe you are looking for
-
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
-
Problem in Creating New position in Siebel CRM 7.8 using java program
Hi We have Siebel CRM with Business Object and Business Component as Position. Position Business Component has a manadatory pick list Division. When we try to create a new Position by picking the Divison then we are getting the below error Logged in
-
Changing sort order in Finder to display folder first
In almost every other release of OS X there was a tweak to edit the frameworks so that you could have finder, when sorting by "Kind/Type"you could display folders first. Well of course they broke that in Leopard. Has anyone discovered a way to reinst
-
hi! I have an applet , the applet functions as a server . the server suppose to work on the users computer , meaning all the sockets and ports will be opened on the users computer not on the host where the applet sits . then i want the applet to writ
-
I have created a large 8.7meg vi. I am not using any sub-vi's. The last thing I did was copy a large section of code and paste it in another area of the block diagram. I then made a few changes to the new local variables and moved a few of the new ob