My cell service won't connect, how can I fix this?

I turned it on airplane mode, then back to regular and now it won't connect....

    Oh wow! We understand the importance of being able to have service on your iPhone 5. We are hoping that things are back to normal, but if not, we want to get more details from you.
Let's determine if there is a phone issue or a network issue. Are your calls, texts and data all affected? Where are you located?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • My iMac can discover WiFi but won't connect how do i fix this?

    My iMac will discover WiFi connections, i type in the right password but it wont connect how do i fix this?

    A lot of older iMacs only support the original Airport, and not Airport Extreme.   PowerPC (PPC) iMacs that have extreme are limited to 802.11g, and can't do 802.11n.   Those with the original airport only support 802.11b, and the insecure WPA/TKIP or WEP encryption, and are better served via ethernet to a WiFi ethernet bridge.
    The airport card typically is not built-in.  Verify with http://www.everymac.com/ what the status of your iMac was, and/or see this article:
    http://support.apple.com/kb/HT2256
    Intel iMacs that are Core2Duo can be upgraded to 802.11n with the 802.11n enabler.  You'll have to contact the Apple Store online nearest you to determine if you can still download it, as it is not on their website.
    To determine if you already have it, see this tip:
    http://www.engadget.com/2007/01/30/apple-busts-out-1-99-802-11n-enabler/

  • My lock screen button won't work how can I fix this?

    My lock button won't work, every time I click it it won't lock my screen unless I press the button hard enough and or in a weird gesture, how can I fix this where I don't need to struggle locking it?

    Stating the obvious,
    Can you Reset it?
    Have you checked if the Hold switched is not in locked position? (should not see the red mark)

  • I can't open my work web site it lets me go right to the login page and won't open how can I fix this

    I can't open my work web site it let's me go to the login page then it won't go any further how do I fix this

    To see whether this problem is caused by the new HTML5 parser feature in Firefox 4, you can turn it off like this:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''html5''' and pause while the list is filtered
    (3) Double-click '''html5.parser.enable''' to toggle it to false (it will turn bold).
    Then return to your work site and reload the page.
    Does that make any difference? If so, you can leave it that way. If not, you might as well switch it back (double-click that preference again to toggle it back to true.)
    If not, and you need to roll back, here's the process:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 4.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • I sometimes get Error 42 when opening a TCP connection - how can I fix this ?

    In my Labview application I am opening a TCP connection in an identical way to the Data Client example. I am using a direct connection to external equipment using an ethernet crossover cable. The error occurs on at least 2 different PCs.
    The error can occur regardless of whether anything is connected to the ethernet port of the PC.
    The only way I have found to clear the error is to power down the PC and restart with a connection to the office LAN. Then I can swap back to the crossover cable and talk to the remote equipment once again, ...unitl the next time the error occurs.
    I have LabView 6.0 running on Win98.
    Any help greatly appreciated.

    Jeremy,
    Thanks for taking the time to answer
    I already checked the link you suggested but I am connecting to my remote instrument with a 2m cross-over cable.
    I Have looked into this a little further, it seems the sequence of events is as follows -
    1. After some hours the connection gets lost.
    2. TCP Read returns error 66 - Connection was closed by peer.
    3. If I try to restart my program I get Error 42 at TCP open Connection.
    4. Rebooting the PC doesn't clear the error 42 problem.
    5. If I try to PING my instument I get "Host unreachable".
    6. I have to "refresh" my network card by connecting to our LAN and either opening a file on another PC or simply sending a PING to another PC.
    6. I can then reconnect my remote instrument via cross-over cable
    and we're up and running for another few hours.
    I get the same problem on two different PCs with different NICs and different OS (Win98 and WinME)
    I am assuming that because a reboot has no effect that its not a memory allocation problem.
    It seems like LabView stops talking to the NIC and then gets locked out some how.
    Any other tips ?

  • Firefox will not load any website, it says unable to connect, how can I fix this?

    Every url I type in it comes up with unable to connect and firefox cant establish a connection! its like it's not even got a connection but i can get on the internet at the same time with internet explorer! I have tried disabling the IPv6 and Prefetch and still unable to connect! i have changed the proxy to no proxy and still unable to connect.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • My ipod touch 4g fell in water and it works well however the camera shutter won't work how can I fix this?

    The question explains all

    If it is not completly dry then try it.
    Next
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • After upgrading to Firefox 4.0.1, it no longer will open external links - anything from emails, IMs, databases won't open - how can I fix this?

    No links from external programs will open - this is usually kind of ok since I can cut and paste, but some links from databases don't provide copy-able links, meaning I cannot access information via Firefox.

    Hi BladedxRayne,
    You should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
    Hopefully this helps!

  • I have just bought a new iMac which is running mountain lion and my logic won't work how can i fix this

    i have just bought an imac 27 for my music making and ive installed logic and it wont work saying its not compatible what do i do please

    Hi
    Sounds like you need to run Software update and install the latest version of Logic
    CCT

  • I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?

    I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?

    Did you try to connect in recovery mode, explained in this article?
    iOS: Recovery mode

  • My iPod is dead and won't charge or connect to the computer. How can I fix this?

    My iPod is dead and won't charge or connect to the computer. How can I fix this? Before it died, it said I had a full battery whenever I charged it, but as soon as it came off of the charger, the battery level was always under ten per cent.

    Sounds like the battery needs to be replaced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?

    My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?
    Can anybody help me on this issue? I have already tried to replace the batteries but since the computer won't get past the spinning wheel of death then the keyboard won't connect.

    Please follow Apple's advice in http://support.apple.com/kb/TS2570. If you need to get your hands on a wired USB keyboard, even a PC one will work fine.
    Do not follow the previous poster's advice, that option is a "last chance" option. OS X is stable and in most cases a reinstall is never needed. Follow the directions in Apple's letter.

  • I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    Have you tried to reboot your router? Unplug it, count to 30, plug it back in and let it reboot. Also you may want to go into your settings on your iPad and 'reset network settings'.
    In case the update messed something up, letting the devices reboot sometimes helps.

  • TS1398 I updated my airport firmware and my Imac works fine, but my two Ipads won't connect to the internet now. How can I fix this?

    I updated my airport firmware and my Imac works fine, but my two Ipads won't connect to the internet now. How can I fix this?

    Did you check your wifi settings and do a reboot?

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

Maybe you are looking for

  • Can't get rid of Perian software update window in the center of my screen.

    When I woke up my computer this morning, there was a Perian software update window right in the center of my screen.  I cannot get rid of it and don't want to install it.  No matter what I push...it won't budge.  My choices are Skip this version, rem

  • Firefox on the dock

    I downloaded firefox onto my macbook pro and I turned off the computer when I was finished using it. When I turned it back on, both firefox and safari were missing from the doc. Now everytime I want to open either safari or firefox I have to go to th

  • Getting components of equnr in nested IBAUs

    Dear experts, I have to get the BOM components of a equipment number (equz-equnr). The problem is how do I get the data if there are nested IBAUs? I dont even know what IBAUs are? can some body please give me some info on IBAUs and how to get the com

  • Pdf to jpegs

    I have recently scanned some pictures to pdf but the software I want to use only takes JPEG's. To save having to scan these pictures in again, is there a way to change pdf's to JPEGs? Please help

  • Uploading 2010 Infopath Form to Sharepoint 2013

    Hello, I uploaded a Infopath 2010 form from my Sharepoint 2010 website to my new Sharepoint 2013 website. I get the following editing message under my form title: Last modified at (todays date with time) by admin (Edit this Page) How can I deactivate