My centre speaker wont work just bought sound blaster live

: i bought sound blaster li've without a cd and i installed the drivers
all my speakers exept the centre works pleaseee some helpp mee
i heard that i need some EAX console with media source soo where can i get it i looked all over the net
pleasseee help meeeee

ok thanks for answering my last question,,,i figured out the prob i had before,,,,i just deleted the dri'ves and reinstalled them,,,now my speakers work but only 2 of them,,,thats why i bought the soundcard,,,so i would have more than just 2 speakers,,,,i know i have installed the card correctly and yes i did use the cd that came with it,,,i followed the instructions that came with the speakers and it said for a 5. surround sound system wich is what i have,,to plug them in the color coded plugins on the soundcard,,,i tried them individually in each plug and they all work but not all together,,,anyones help on this is greatly appreciated,,,

Similar Messages

  • Need help fast just bought sound blaster audigy se c

    Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

    Hi,
    May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

  • Sound blaster liv

    I have just bought sound blaster li've and my 5. creative inspire 5200 still don't work. I can't find anywhere the CMSS, not even in the EAX thing. I am running on windows xp. So if anyone could help me with this problem i would greatly apreciate it.
    cypres

    Could you please explain your problem in more detail?From the info you posted, it seems your soundcard appears to be installed properly. By that i mean, Windows detects it, the drivers are installed etc. But you are not getting any sound?If that is the case make sure you check yout Mixer settings and make sure the Wave and Master outputs are not muted.

  • Woofer and centre speaker not working

    Hi, recently purchased a Creative P580 and I can't seem to get the woofer and centre speaker to work, I have a 5.1 sound card and it does support 4 channel sound, suuround sound is turned on, any ideas? thanks Pete

    Pete,
    You didn't mention specifically which card you have, or what kind of audio you're testing, but take a look at this knowledgebase article first. For music, for instance, you would need to enable CMSS if you want sound out of all of the speakers, as the source isn't real 5.1
    Other than that, just make sure the speaker settings for the card are set to 5.1, and that you've adjusted specific volume levels for speakers (if it's available on your card - like a center speaker volume bar in the mixer).
    Cat

  • I Drop My Ipod Alot And Now It Wont Charge It Wont Show My Notifications Even Doe They Are On My Home Button Wont Work Just A few Times But Thats It.and when on my vine i doesnt let me hear my vines idk why

    PLEASEE HELP I Drop My Ipod Alot And Now It Wont Charge It Wont Show My Notifications Even Doe They Are On My Home Button Wont Work Just A few Times But Thats It.and when on my vine i doesnt let me hear my vines idk why

    You broke it, you will need to get it serviced or replaced. The drop voided your warranty so you would have to do an out-of-warranty replacement with Apple.
    Please don't type in headline style, i.e. capitalizing every word.

  • My work just bought me a creative cloud subscription to replace my personal one.

    My work just bought me a creative cloud subscription to replace my personal one now that I am using a work computor. I am trying to switch over to that license but I am being asked for a Serial Number even though it is a subscription. How to I completely log out of my Adobe ID and then start over with the new ID? Do I have to uninstall everything?

    You should be able to Sign Out and then Sign In again with the Adobe Application Manager to switch accounts.

  • My speaker wont work on my iphone , coud i bring it to the store and get a new one ?

    my speaker wont work on my iphone and ive tried everything could i bring my phone to the store to get a new one ?

    Have you checked the silent switch on the side of the iphone?
    Have you tried turning the volume up?
    Have you tried restart?
    Have you tried reset?
    Have you tried restore?
    Have you tried restore as new?
    If all of these fail, then make an apointment at the genius bar.  If your iphone is defective and is within the warranty period, then they will replace.

  • The frontal panel of SOUND BLASTER LIVE 5.1 works, whit Audigy 2

    They estan to me selling a frontal panel of card SOUND BLASTER LIVE 5, worked in the
    AUDIGY 2 ZS so that my AUDIGY did not bring the frontal panel.
    Please.....
    Atentamente Jose Gonzalez (Venezuela)

    not quite sure how much this goes contrary to the interest of this Forum :smileytongue: but according to this it works:
    http://www.driverheaven.net/showthre...79&page=2&pp=5
    make sure to read the whole thing
    cherio
    PHYNESSE

  • MSI KT3V + Sound Blaster Live Problem

    Hello Guys
    First, sorry for my english, i'm polish.
    Yesterday I sold my old motherboard (Shuttle AK32A), and i bought new motherboard MSI KT3V.  After instaling all peripheals I install on formated partition Win2000 SP3, Via 4in1 4.45, Drivers for my GF4 MX440, Network Adpater 3Com-SOHO, and sound blaster Live 1024. After this i instal game IGI2, and try play, After 30 s. in game main menu my computer crashes, screen is black, led on monitor is lights on yellow, after this i hear 10 - 20 second music from main menu in speakers, after this time my computer crashes completely, a hear beeeeeeeeep from speaker, and this moment I can only push reset button :(
    I try install many version drivers, from orginal cd, downloaded from internet. And newest version from 1.03.2002. An nothing :( I remove my Live 1024 from computer, and put friend live 5.1, and no changes, computer crashes :(
    My desktop resolution is 1128x864x32 bits 100hz When i try play  Divx movies after 1 - 2 minuts, frequency of my screen automatic swicth to 50 hz. If I try manualy switch frequency to old value (100 hz) nothing hapend, and i only can restart system :(
    When i work on my desktop (Word, IE, Winamp etc.) after 5 - 20 minutes, my system crashes too (yelow LED on monitoir, black screen, same situation) and I can only push reset button. When i remove card from pc, or turn card off in device manager all works fine.
    I upgarde bios to newer wersion (1.8), reinstall drivers, reinstall windows in APIC options turned off, remove network adapter, and no changes :(
    P.S. On old Mothearboard all works fine :(
    Anyone can help me solve this problem. Please
    Grettings Mark
    My Hardware
    MB: MSI KT3V
    Athlon 1700+
    512 MB DDR 266 Mhz
    3Com-SOHO Network Adapter
    WDC60 GB +  8.4GB Seagate
    GF4MX440 64MB InsideTNC
    CDRW Teac 40x, CD LG52x

    Quote
    Originally posted by maesus
    Also set PCI Delay Transaction enabled.
    This was a solution for my problem :-)
    Thank you very much. You have beer from me :-)
    Grettings

  • BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

    Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

    I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
    Thanks,
    Kevin

  • CREATIVE SOUND BLASTER LIVE 5 voice dist

    I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
    http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
    Message Edited by pcr_sof on 06-2-200708:36 PM

    Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

  • GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

    My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

    Try kxproject site for driver

  • Sound blaster live 24bit full volume buzzing soun

    hello ,??i just recently bought sound blaster li've 24bit, i have got 2.0 alteclansing VS220 speakers(no subwoofer), wanted to ask when i turn my speakers to medium volume ok no buzz , no problems but when i turn it to max. loud buzz comes from speakers, is it my speakers or is it the sound card signal to strenght ratio thing i don't know help me out.

    Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
    Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
    Try that and see how ya go.
    Message Edited by xmn on 03-29-2006:55 PM

  • How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

    How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

    First off your operating system version is obsolete and not being updated for security issues from Apple.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
    However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
    Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
    http://roaringapps.com/apps:table
    I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
    Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
    https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
    The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
    http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
    If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
    I'm afraid you'll have to do some more digging to get it to work.
    The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
    So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
    Good Luck

  • Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

    Hello!
    I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
    I linked them with with the SPDIF-Out on the Live! Drive.
    First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
    When i do the sound test in the sorround mixer, only the left and the right front speakers work.
    Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
    Can you help me?
    How do i have to link this devices?

    You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Maybe you are looking for

  • Possibility to auto-storno consequent FI-document coming from MM (4.6C)?

    Hi, it seems my question is not to be posted right here, but it is concerned to some abap-ing, so perhaps this is the place where to ask. Scenario is: We have Invoice Receipt (from MM) with consequent FI-document. For some reason we have to storno th

  • Getting started without syncing iTunes - Can't proceed

    I just bought an iPad2.  It has iOS5. I don't want to sync to any PC but would rather just sync using iCloud.  I have a wireless network but can't get past the screen that asks to connect to a PC or Mac and sync iTunes.  How do I get past this screen

  • Trouble with Complex Object example

    From the 3.5 Tutorial. I have all of the .xml files in d:\oracle\home\labs, the .cmd file to start the cache using the POF is in the same directory. When I run the .cmd file, I get an Illegal State Exception: Missing POF configuration The POF configu

  • BI Content Activation & Installation

    Hi Experts,                  Could you please ellaborate all steps(R/3 Side & BW Side) involved in Business Content Activation(interms of  D,M,A Version) and Installation.Thank you. Vasanth.D

  • Dynamic setting of line count and footer in classical report

    Hi all, In classical report,we can set line count and footer at the beginning of the report  as Line-count 6(2), here out of 6 lines 4 lines is for content and 2 lines is for footer (assume no standard heading), but if my report produces less content