My Character Report don't send printer codes to the printer
Hi every one !
I am developing an ASCII report, I made my own prt file for my printer, I defined my width ... etc.
I want to print bold characters in the printer and configured the printers code in the report (before and after), I put the "codes" in my prt file but the printer don't print in bold. I tryed using RWRUN60 from the command line but is the same.
I put the printer in Data Dump Mode to review all the data in the printer's buffer and what is receiving. The printer is not receiving the printers codes.
What is grong ?
Can Some body help me ?
Thanks,
Robin:
Thanks for the tip. I tryed that and don't work.
I did a change in the report layout and print in doble wide that i wanted in bold.
Other issue was the "NAME" of the code, in my case, the name of the code works with numbers not with a name.
After many, many tries, this is a copy of my prt file for my printer that works !
printer "rdsp"
height 22
width 80
before report esc "x0"
return control(M)
linefeed control(J)
after page control(J) esc "@"
code "12" esc "!1"
code "56" esc "!M"
code "999" esc "@"
!1 = doble wide+doble strike+12 cpi Master select(!) and then 49 (the
ASCII code of character 1)
= ESC ! 1 or 27 33 1 or 1B 21 1 or [21 1
@ = Initialize printer
This is the only thing that it works !!!!
Thanks
Similar Messages
-
I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
== This happened ==
Every time Firefox opened
== When I try to do the updatehttp://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
Where do i get my eprint printer code on the deskjet 3050a?
So long story short, I moved and now I cannot get my printer to work at all. I think I finally got it back online, but I had removed it from my hpeprint.com account so now I need to re-add it but cannot find the code. I have the Deskjet 3050a. I'm worried about internet connectivity because I hit the eprint button and went to "print information page" hoping the code was on that, and all it does is say "downloading page" and then it never prints.
These steps typically resolve the issue:
1. Press the ePrint button on the printer's front-panel screen, then press "Print Info Page".
2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
If that does not work and it never prints follow the steps below:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the network icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
5. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
6. Click on IPv4 under the correct connection (wired or wireless) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
InDesign CC no longer packages fonts when I need to send a project to the printer
Hey Adobe team: Long-time user from when Photoshop was but a sprout. I recently upgraded from Creative Suite 6 to Creative Cloud and have run into a troubling problem. InDesign CC no longer packages fonts when I need to send a project to the printer. This meant that I had to completely redo a project on deadline for a problem that I’ve never had before. How is this possibly helping your users? And is there a solution in the works or do I need to cancel Creative Cloud and go back to CS6?
@OurPlace
First of all, you are not addressing any Adobe team. These forums are primarily supported by volunteers who are not Adobe employees and don't officially represent Adobe Technical Support.
That having been said ...
There was nothing done specifically with InDesign 9 or 10 (the CC and CC 2014) versions of InDesign to change or disable packaging of fonts when packaging a document. It should be absolutely no different from InDesign 8 (the CS6 version).
Troubleshooting hints:
(1) Make sure you check the Copy Fonts (Except CJK and TypeKit) option in the package dialog.
(2) Make sure that you are not using any CJK (Chinese, Japanese, and Korean) complex fonts that we specifically will never put into a package.
(3) TypeKit fonts won't package.
(4) Make sure that your file system permissions are such that InDesign can create all the necessary directories and subdirectories for the packaging operation.
(5) If on MacOS, exit InDesign and try forcing a clearing of your system font cache and then reboot.
(6) Exit InDesign and then find and delete all files on your system with filenames of the form AdobeFnt##.lst where ## is a two digit number; don't delete any other files that start with AdobeFnt. Then reboot and restart InDesign.
(7) Reset InDesign's preferences that may have become corrupted. For Windows, start InDesign, and then press Shift+Ctrl+Alt. Click Yes when asked if you want to delete preference files. For MacOS, while pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files.
One of these should either address or resolve your problem. Again, we at Adobe are not aware of any generic issue with packing fonts with InDesign.
- Dov -
How to turn off printing message box that appears every time I send a document to the printer?
How to turn off printing message box that appears every time I send a document to the printer? Appears bottom right corner of screen above task bar. Printer is HP c309a All-in-One PhotoSmart printer.
I have an Iphone 4s, and every time I receive a call and i dont answer it, the cell shows a black screen with many things to do and automatic messages to send, like "call back, save, remind, call now, call later, etc". If I don´t close it as soon as i receive the call, then the cell gets frozen in that screen and i have to restart it. Sory for my english, i´m from argentina! thaks for your help !!!
-
My uncle passed away recently and we are trying to access his iPad but don't know his code so the iPad is disabled. Can we unlock it without having to reset it as we don't know if he's backed anything up and we don't want to lose whatever is on there... thanks in advance.
About all you can do is take the device to an Apple Store along with the death certificate and explain the situation...if someone can do something, it would be them.
-
rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files. -
Where can I find my proxy address and the printer code on the HP officejet 8500A Plus
where can I find my proxy address and the printer code on the HP officejet 8500A Plus
Hi TanaS,
I understand that you're trying to setup ePrint. Most users when setting up ePrint do not require entering a proxy address.
Are you having trouble setting up ePrint?
Are you getting an error message when you try to setup ePrint? -
How can I get Acrobat Reader X to send my pdf to the printer?
My pdf just looks at me while I push all of the buttons, file menus and keyboard shortcuts associated with printing and it does nothing. No dialog box, no nothing. All three of my printers work and i've tried them all. It just doesn't do anything. Any suggestions? I really need help here.
From: Pat Willener [email protected]
Sent: Monday, July 30, 2012 9:16 PM
To: vinniereed
Subject: How can I get Acrobat Reader X to send my pdf to the printer?
Windows 7; Acrobat Reader 10.0; local and online.
Thanks,
Vinnie
Re: How can I get Acrobat Reader X to send my pdf to the printer?
created by Pat Willener <http://forums.adobe.com/people/pwillener> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/4588698#4588698 -
I require a new printer code as the one supplied with the printer is out of date. The number supplied with the printer is
ipdid38adiv43. I will also require a new e-mail address.Hey acatto!
The email address should stay the same, but the code does expire after 24 hours. What you need to do to get it running again is to reprint the email information sheet. You can do this normally through the web services menu under settings. If you tell me what kind of printer you have though I'd be happy to tell you exactly where it is.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Hi Guys
Could anyone correct me how can I print directly to the printer from this program ,I am getting short dump error when I select the radio button printer and execute it.
Rgds
PEoops sorry here it is below
REPORT Z_ESLP_ZTCODE LINE-SIZE 132 .
*TABLES
TABLES : AGR_TCODES,
AGR_USERS,
TSTCT,
T16FW,
T16FD.
type-pools: slis. "ALV Declarations
CONSTANTS MARK VALUE 'X'.
TYPES: BEGIN OF T_DISP,
AGR_TCODES TYPE AGR_TCODES-TCODE , " Transaction code A
AGR_NAME TYPE AGR_TCODES-AGR_NAME, " Role Name B
AGR_UNAME TYPE AGR_USERS-UNAME, " Short User Name B
TTEXT TYPE TSTCT-TTEXT, " Description Name C
TEXTC TYPE USER_ADDR-NAME_TEXTC, " Long User Name
SPRSL TYPE TSTCT-SPRSL , " Language c
TEL_EXTENS TYPE USER_ADDR-TEL_EXTENS , " Extension
DEPARTMENT TYPE USER_ADDR-DEPARTMENT , " Department Name B
FRGGR TYPE T16FW-FRGGR,
FRGCO TYPE T16FD-FRGCO,
OBJID TYPE T16FW-OBJID,
FRGCT TYPE T16FD-FRGCT,
SPRAS TYPE T16FD-SPRAS,
END OF t_disp.
DATA: it_disp TYPE STANDARD TABLE OF t_disp INITIAL SIZE 0,
wa_disp TYPE t_disp.
DATA: params like pri_params,
days(1) type n value 2,
count(3) type n value 1,
valid type c.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
parameter: p_trigr type c default space.
SELECTION PARAMETER CRITERIA
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
P_TCODE FOR AGR_TCODES-TCODE , "OBLIGATORY, "no-extension no intervals,
U_NAME FOR AGR_USERS-UNAME,
R_NAME FOR AGR_USERS-AGR_NAME .
SELECTION-SCREEN END OF BLOCK BLK1.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN END OF BLOCK BLK2.
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK radio WITH FRAME.
PARAMETERS :
scr RADIOBUTTON GROUP rbg1 ,
Pr RADIOBUTTON GROUP rbg1 .
SELECTION-SCREEN END OF BLOCK radio.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname = 'AGR_UNAME'.
fieldcatalog-seltext_m = 'User'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TEXTC'.
fieldcatalog-seltext_m = 'Name'.
fieldcatalog-outputlen = 60.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AGR_NAME'.
fieldcatalog-seltext_m = 'Role Name'.
fieldcatalog-outputlen = 15.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AGR_TCODES'.
fieldcatalog-seltext_m = 'Trans Code'.
fieldcatalog-col_pos = 3.
fieldcatalog-outputlen = 20.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TTEXT'.
fieldcatalog-seltext_m = 'Description'.
fieldcatalog-outputlen = 70.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT PRINTER SETUP
PRINTER SETUP
form printer_setup.
DATA:L_PARAMS TYPE PRI_PARAMS,
L_VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = ' '
LINE_SIZE = 220
RELEASE = 'X'
MODE = 'CURRENT'
NO_DIALOG = ' '
IMPORTING
OUT_ARCHIVE_PARAMETERS =
OUT_PARAMETERS = L_PARAMS
VALID = L_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
IF SY-SUBRC eq 0.
ENDIF.
"But it will take default printer from user settings
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG.
write : 'print is on'.
NEW-PAGE PRINT OFF.
DATA: PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'Z_ESLP_ZTCODE'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 120
LAYOUT = 'X_44_120'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
SAP_OBJECT = 'RS'
AR_OBJECT = 'TEST'
ARCHIVE_ID = 'XX'
ARCHIVE_INFO = 'III'
ARCHIVE_TEXT = 'Description'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
OUT_ARCHIVE_PARAMETERS = ARPARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
ARCHIVE PARAMETERS ARPARAMS
WITHOUT SPOOL DYNPRO.
ENDIF.
endform. " BUILD_LAYOUT
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_disp
exceptions
program_error = 1
others = 2.
if sy-subrc EQ 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form lfa1 table and populate itab it_lfa1
form data_retrieval.
CASE MARK.
WHEN scr.
SELECT AGR_TCODESTCODE AGR_TCODESAGR_NAME AGR_USERSUNAME TSTCTTTEXT USER_ADDR~NAME_TEXTC
INTO TABLE IT_DISP
FROM AGR_TCODES
INNER JOIN AGR_USERS
ON AGR_TCODESAGR_NAME = AGR_USERSAGR_NAME
INNER JOIN USER_ADDR
ON AGR_USERSUNAME = USER_ADDRBNAME
INNER JOIN TSTCT
ON AGR_TCODESTCODE = TSTCTTCODE
where
agr_tcodes~tcode in p_tcode
and
agr_users~uname in u_name
and
agr_tcodes~agr_name in r_name
and
TSTCT~SPRSL EQ 'E'.
WHEN pr.
perform printer_setup.
ENDCASE.
*lifnr
*between '0000100001' AND '0000150000'.
endform. " DATA_RETRIEVAL
Release memory no longer required.
free: it_lfa1 .
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'Transaction codes by User and Role Name ' .
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_disp lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Transaction Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'TCODES'.
Read data table, using index of row user clicked on
READ TABLE it_disp INTO wa_disp INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_disp-tcode.
Sxecute transaction zven, and skip initial data entry screen
CALL TRANSACTION 'Z' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform. -
I can access a website and select the 'print' option but the print misses out
I can access a website and select the 'print' option but the print misses out photos that should be included in the print. It happens on more than one website. If I use Explorer it doesn't happen. I guess there must be a setting or something that I have not found? Any help very gratefully received. Than you.
I don't know if this will help, but I found it by accident. When I send Word projects to recipients, it doesn't always read properly depending on their format. If they have a PC It distortes my program, or they may have newer versions of Word. If you have your document showing select 'print' and on my print menu at the bottom left corner it has a button that says 'PDF'. Click on that and it gives you several options for a PDF. What I do if I'm emailing to someone is select the email option then you can always print from the email. Hope that helps.
jr -
I go to print and try to select the radio button to print all frames, but It's not working
The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page. -
Print directly to the printer option in the Windows registry
I need to find the location for the option to "Print directly to the printer" in the Windows registry. I am trying to create a GPO to enable this option at login and I can't find the location for it. Is this possible to do? If not, is there another way to enable this at startup for all users? We are running Adobe Acrobat X on Windows 7 Enterprise 32-bit.
ThanksI guess that those of use responding don't know enough about the process you are trying to implement to be of help. Printing to network drives has been an issue for folks for a long time and a lot seems to depend on the network. That is probably of zero help and all I can suggest is just to hang on for someone who hopefully has an idea. If we can get a better handle on what you are trying to do, we might be able to make suggestions. However, I think our answers are not going to be there for the registry issue.
-
Print directly to the printer from Oracle 9I
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
Maybe you are looking for
-
Hello all, When we are running the reports from workspace. It is showing the below error and we have recently upgraded our environement from 931 to 933. Does it related to the environement upgrade? "5200: Error executing query:/Plan1//Error(1001211)
-
Foreign Currency Posting Clearing
Hi, I have a foreign currency clearing issue. Please look-in to my scenario below. We are in SAP R/3 4.6C. We have two billing document (open item) one is advance payment and other is billing invoice with same amount (in foreign currency) and foreign
-
Safari not working on iPad 2 with latest updates
The safari is not working on my ipad 2. It has all the latest updates. When I try to go to an internet site it gives me an error message, "Safari cannot open the page because it could not connect to the server." My other mobile devices are working
-
HT5922 I cannot connect my Bowers & Wilkins A5 to my mbp running Mavericks
I connected my iPad easily to the B & W A5, but have had no success with my mbp running OS X Mavericks.
-
I cannot send text message from the message icon. When I click on the app, it asks me to sign up for Imessages. When I do that, it tells me that my existing e-mail address is already associated as an Apple I.D. Can anyone offer any suggestions on