My charger and headphones are broke? What do i do?
I have problem with my headphones and charger. Both my headphones and charger is not working. I made a mistake and threw my headphones away but still have my charger. So, would i be able to get another pair of headphones and a charger for my Ipod?
Message was edited by: Patriickzx
- Make an appointment at the Genus Bar of an Apple store and find out. I think you mean the cable, not charger since the iPod does not come with a wall charger. If the cable was abuse that is not covered by the warranty.
Apple Retail Store - Genius Bar
Similar Messages
-
Free replacement for charger and headphones?
My apple charger and headphones don't work anymore and I was wondering if apple would give me a free replacement for my charger and headphones?
They are covered by the same 1-year warranty that covers the iPod. If defective and not abused Apple will exchange them at no cost. I think when you say charger yo mean cable since the iPod does not come with a wall charger
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?
There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above. -
Internal speakers and headphones are not working
I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??
Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Listener and gsd are unknown, what is the reason
I just install 10g RAC on linux, everything was good. However, I shutdowned the whole system and started it again,
my listener and gsd are unknown, what is the reason?
rac1-> crs_stat -t -v
Name Type R/RA F/FT Target State Host
ora.devdb.db application 0/1 0/1 ONLINE ONLINE rac1
ora....b1.inst application 0/5 0/0 ONLINE ONLINE rac1
ora....b2.inst application 0/5 0/0 ONLINE ONLINE rac2
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 ONLINE UNKNOWN rac1
ora.rac1.gsd application 0/5 0/0 ONLINE UNKNOWN rac1
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip application 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE UNKNOWN rac2
ora.rac2.gsd application 0/5 0/0 ONLINE UNKNOWN rac2
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip application 0/0 0/0 ONLINE ONLINE rac2
rac1-> srvctl start listener -n rac1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.LISTENER_RAC1.lsnr' has placement error.
rac1-> srvctl start listener -n rac2
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac2.LISTENER_RAC2.lsnr' has placement error.
rac1-> tail -30 alert_+ASM1.log
SUCCESS: diskgroup RECOVERYDEST was mounted
Wed Aug 31 17:24:48 2011
NOTE: recovering COD for group 2/0xc8787a38 (RECOVERYDEST)
SUCCESS: completed COD recovery for group 2/0xc8787a38 (RECOVERYDEST)
Wed Aug 31 17:25:01 2011
Starting background process ASMB
ASMB started with pid=17, OS id=6498
Wed Aug 31 17:28:07 2011
NOTE: ASMB process exiting due to lack of ASM file activity
Wed Aug 31 17:29:00 2011
Reconfiguration started (old inc 1, new inc 2)
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Aug 31 17:29:01 2011
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Wed Aug 31 17:29:01 2011
LMS 0: 43 GCS shadows traversed, 0 replayed
Wed Aug 31 17:29:01 2011
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
rac1-> tail -30 alert_devdb1.log
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Aug 31 17:29:35 2011
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Wed Aug 31 17:29:35 2011
LMS 0: 3118 GCS shadows traversed, 1733 replayed
Wed Aug 31 17:29:35 2011
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
Wed Aug 31 17:31:25 2011
Shutting down archive processes
Wed Aug 31 17:31:30 2011
ARCH shutting down
ARC2: Archival stopped
Wed Aug 31 17:40:11 2011
db_recovery_file_dest_size of 1500 MB is 14.40% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Aug 31 22:00:14 2011
Thread 1 advanced to log sequence 3
Current log# 2 seq# 3 mem# 0: +DG1/devdb/onlinelog/group_2.262.760635995
Current log# 2 seq# 3 mem# 1: +RECOVERYDEST/devdb/onlinelog/group_2.258.760635997add an entry in on both the nodes /etc/sysconfig/network DEFAULT_GATEWAY
eg:-
[oracle@rac1 ~]$ cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rac1.localdomain
DEFAULT_GATEWAY=192.168.1.10
and try to start the service.
if you would like refer:-http://oracleinstance.blogspot.com/2009/12/crs-0215-could-not-start-resource.html -
On my iPhone 5, the battery symbol and percentage won't change, even while charging or during usage throughout the day. The battery is however charging and draining properly from what I can tell.
Has anyone had this issue or know of a fix?
ThanksTry this
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
Using the phone while charging doesn't create a problem.. I do it all the time -
Iphone 4 wont charge because prongs are broke can I fix this myself
Iphone 4 charging port prongs are broke wont charge can I fix this myself
It's possible but I don't recommend it.
Check this out
http://www.ifixit.com/Guide/iPhone+4S+Dock+Connector+Replacement/7278 -
I dropped my ipad and the glass broke what should I do?
i dropped my I pad and the glass broke, what should I do?
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
I made an in App purchase in the Cityville game app, was charged and DID NOT GET WHAT I PURCHASED! How do I get my purchase or a refund?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
My cursor and keyboard are frozen what do i do
my cursor and keyboard are frozen what do i do
Reset PRAM: http://support.apple.com/kb/PH14222
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
How Oracle ASCP and Inventory are integrated ,what are the Integration poin
Hi All Gurus,
Can any one tell me..
How Oracle ASCP and Inventory are integrated ,what are the Integration point of these modules ...?
Thanks,
SatyamHere is a simplistic explanation on the the integration.
When you launch data collection from the ASCP side, Oracle launches a Refresh Snapshot process that gathers the latest inventory (and other modules) information into Snapshots. Snapshots are like materialized views. Then the Planning Data Pull is launched. That process pulls information from these snapshots into the ASCP side.
The following inventory information comes over to ASCP
Item master data (such as order modifiers, planning exception sets etc. )
item categories
Onhand quantities (including consigned invetory quantities) in nettable locations
subinventories
reservations
safety stocks
forecasts
item planners
Quantity in receiving or in transit
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
I have an iPhone 5 and when I go to raise or lower my volume it says my headphones are connected and they are not how do I fix this?
more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8 -
My new xperia Zl charger and microphone are not working
I have a took xperia Zl a month before, and I am facing problem with charger and microphone, both are not working..
Could you please let me know, where can I contact for replacements, since I have a warranty.http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
My headphones are breaking what is wrong with my iPod?
My iPod seems to break headphones- I've gone through multiple pairs. Usually one side of the headphones stop working for no reason and then a few days later the other side stops working. This has only happened with my iPod touch (5th gen-newest). I've replaced the same iPod before and the problem hasn't gone away. I'm pretty sure it is not me because it is only with the new iPod, and I make sure they don't get twisted. What should I do?
Which version of OS X are you running?
Clinton -
MacBook speakers and headphones are not working! Please help.
MacBook OS X 10.6.8
2009 model
I was watching a movie and my MacBook randomly shutdown by itself. I turned it back on and had no more problems, so I restarted the movie. The audio was not working in my headphones. So I tried the internal speakers and there was still no sound. I did a quick google search which led me to trying various options and finally called Apple Support on the phone.
I've tried resetting my PRAM but it only showed an alternating screen between grey and black. Nothing happened. I also reset SMC but that didn't work either. I have checked everything in system preferences, Audio MIDI, etc. and it all appears to be correct.
While on the phone we found that when I plug headphones or an external speaker in, it does not show up on the "output" menu under System Preferences > Sound.
I do NOT have the money to go to a computer store and the nearest Apple Store is 2 hours away. I desperately need help because most of the work I do involves having to be able to listen to sound. Please help if you can. I'm not ignorant when it comes to computers but I'm no genius. If you have any ideas, please be specific. Your help is very appreciated.
PS. When a speaker is plugged in at first, I hear a little crackling from it. The same happens to what sounds like internal speakers if I start a video.Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Report Painter - Balance Sheet Accumulated Balance not shown
Dear Fellow SAP Gurus, I'm trying to create a Balance Sheet Report using Report Painter. The Library that I'm using is 8A2, GLCPT Table and 8A Ledger. I have defined the General Data Selection, Characteristics, Key Figures and assigned the report to
-
Is there a way to delete folders in mass without sitting and clicking on the dialog box for each folder?
-
Link to other parts of the page
How do I link text from higher in the page to something that is near the bottom of the page
-
Upgrade from Captivate 4 to eLearning Suite 6.1 was easy last year. Needed Cap4 for licensing eLearning Suite 6.1. After re-installing Cap4 on a new PC, Captivate 5 (and other products like XSuite or CS6) are minimum requiry?! Now, I can't license a
-
How to return custJava Object from Java Stored Function/Procedure to Java Application
I WILL PAY $100 FOR SOLUTION. Oracle JDBC documentation gives step by step on how to return Oracle Type Object to Java Application. No question here. But is it possible to create Java Stored Function [getMyClass() ] which returns CUSTOM Java based ob