My cinema display just stopped working

my cenema display just quick working.  Any suggestions

Hi Robin from Wilsonville,
If you are having issues with your Cinema Display, you may find the following article helpful:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Regards,
- Brenden

Similar Messages

  • Cinema display USB stops working after upgrading to mountain lion

    I am using a newly bought 27' Cinema display + mid 2011 MBA. an Apple USB keyboard is attached to the display USB port, and a logitech mouse is attached to the USB port on the keyboard.
    After upgrading to mountain lion, when I unplug the thunderbolt from MBA, and then plug it back, the USB keyboard and mouse stops working. Moreover, I cannot open anything in System preference, and cannot properly shutdown the machine!
    Please help on this issue.

    Launch Terminal, type or copy/paste the following:
    killall Dock
    Hit enter.

  • My 13'' macbook pro retina's display just stopped working for some reasons i don't know, what can be the cause?

    Hello
    i'm really worried about my macbook pro, it's a 13'' retina 2012 model. After watching a late night movie last night i just closed the lid and went straight to bed as usual. To my surprise when i flipped open the lid this morning it only made the apple sound when turned on but didn't display anything. I tried switching it on and off several times but nothing changed. So i connected it to an external display and it worked fine. The funny thing is i never dropped it or spilled any liquid on it. Now i'm wondering what could be the cause and i'm hopping someone might be abble to explain this....Could it be the lcd screen, the video card or graphic processor or could it be the logic board?? Help.

    reseting the System Management Controller won't wipe my SSD drive will it?
    No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else.

  • I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    Thanks for that.  I did as suggested but when I tried again, it still did not work.  Another  com.apple.Grab.plist appeared in the Library.
    I now have the following files in Library
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
    file://localhost/Users/peterpatel/Library/Preferences/
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
    What do you suggest I do now?

  • HT201412 I have an iPad 2 that just stopped working...no display...won't turn on...tried all steps in above article.

    I have an iPad 2 that just stopped working...no display...won't turn on...tried to sync to iTunes and couldn't because I need to put in my passcode. There is no display, so can't do this. Am dead in the water. Does anyone have ideas to solve this issue?

    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT3492 I have an Acer S239HL display monitor connected to my MacBook pro that just stopped working. Acer customer support said I needed to refresh the display adapter driver. How or where do I find this?

    How do I update or refresh the display adapter driver on my MacBook Pro? I have it connected to an Acer display monitor that just stopped working. Acer custoemr support told me I need to refresh the display driver. ANy suggestions on how I do this? Or what I need to download or update/ Thanks.

    So the display WAS WORKING connected to your Mac?
    Restart your Mac.
    Try the monitor on another computer, Mac or Windows, to see if it works at all.

  • HT201436 how do I get my iphone 4 to display the name of an incoming caller? It just stopped working,thanks

    How do I get my iphone 4 to display the name of an incoming caller?  It just stopped working all of a sudden.

    I suggest contacting your carrier, typically if there is an issue with caller id its an issue with the carrier.

  • My cinema 24" just stop, the fan is going, but no light.

    my cinema 24" just stop, the fan is going, but no light.
    The display don´t work,,,,someone .any idea what to do?

    Same thing here.  Just happened today.  Was at the computer got up for 20 mins came back and it's black.  I have ti hooked up to a 27" iMac.

  • IPhone 5 display has stopped working. How do I fix this?

    My iPhone 5 display has stopped working. The Lock button has not been working for quite some time now, so I can't try a reset. When I plug the phone up to the computer, it makes the sound which indicates that it has been hooked up, bu nothing is displayed. It is just a black screen.

        I'm sorry to hear about your phone, frodolad_ell. It sounds like you have a defective device. Is the phone still under the one year warranty? Does the device have physical or moisture damage? Please provide me with a few details.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • My media player just stopped working.

    My media player on my Q10 just stopped working. When I try to pla an audio or video file it will play for at most 7 seconds and stop and next the following error msg will be displayed "the file can't be played due to an unexpected error". I have wiped my phone but it is still the same

    I don't know. Quick searching did not turn up a sure fire fix. Maybe you have searched as well. There is a long thread on CrackBerry where several users report trying different things. Is wiping the device the only thing you have tried?
    If you have another card (or can borrow one) that is what I would want to try. In that one thread, that was the one reported fix: a new card.
    If playing files from device memory works, and reformatting the card doesn't fix the problem, seems to me next step is try another card that you know is good.
    - Ira

  • My iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work

    my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I bought an ipad mini the other day and Siri just stopped working today

    I bought a new ipad mini in store of Thursday and was very pleased. Siri was working all well but then today it just stopped working. It isn't picking up and sounds through the microphone. What should I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Router (WRT310N) Just stops working...

    Well I play Halo and whenever I host a server, there's usually no issue with the lag or anything, but usually after I restart a game, maybe 10 minutes into the new game the router just stops working completely... It's still on but is not connecting to the internet or anything, it doesn't work until I shut it off and put it back on..
    Can someone help me with my problem?

    I guess you should try to upgrade/flash your router's firmware...
    Download Firmware 3.23 MB...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    See if this fixes your problem...

  • Two games apps just stopped working

    I'm new to the ipod and was wondering if someone knows why two of my games apps have justed stopped working. The icons display a "X" symbol on the top LHS when you hover over the icon. Tapping the icon tries to launch the app but they always fail. Its frustrating as they did work. Reloading, re-syncing and updating these apps does nothing.
    Thanks
    Mike

    Try resetting the device. Hold down on the sleep and home keys, past the red slider, until you see the silver apple and let it reboot.
    If that doesn't work, try downloading a free app. Any free app. This often clears the glitch. It's like the iPad 'forgets' who owns the iPad and when you have to sign into iTunes to download a free app, that act reminds it and clears up the non function of apps.

  • Mac Mini + A1038 Cinema Display does not work

    Hi,
    I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
    The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
    This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
    So my question is, why does apple hardware only work with non-apple hardware?

    Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
    http://store.apple.com/us/product/M8661LL/B

Maybe you are looking for